20 Most Recent Bush DVD142RC 14 in. TV/DVD Combo - Page 6 Questions & Answers

been on to bush website it says go to settings on the tv via the home button go to channel scan unplug he aerial and it will say no channels found then plug aerial back in and do the scan again hopefully this should work

Bush are NOT a good make, they used to be but not any more. It sounds like a dry joint on a component. Not easy to find, you need a powerful magnifier and check the solder joints on every component on every board.

There are a few things you can attempt to fix your Bush VL19HDLED TV if it is showing a poor image: Verify the picture settings: Inappropriate picture settings could be the root of the undesirable picture effect. Verify that the picture mode is set to "Standard" or "Normal" in the TV's settings menu. Furthermore, make sure "Picture Invert" and "Negative Picture" are off by checking the options. Try resetting the TV to its factory preset settings. You must consult the user handbook to accomplish this because different models reset in various ways. Verify the connections. Verify that every wire leading from your TV to any connected external devices (such a cable box, DVD player, or game console) is securely fastened and operating as intended. Contact a repairman: If none of the aforementioned fixes work, there might be a hardware problem with the TV. In this case, it may be necessary to contact a repair technician for further assistance. The Bush VL19HDLED TV is a rather ancient model, thus it could be challenging to get replacement parts or help for repairs. It can be more cost-effective to replace the TV if troubleshooting is unsuccessful in fixing the problem.

It is possible that the VCR has frozen up or is stuck in an infinite loop. First, try unplugging the unit and letting it sit for several minutes. This may reset the unit and allow it to start working again. If that fails, then really you will need to take it to someone to repair.

You have to go into the audio setup on your tv with the remote. There you can adjust where the audio output is going and turn off the tv speaker.

There are a few options you can try to find a manual for your A/V stand:

1. Check the manufacturer's website. Many companies provide online versions of their product manuals that you can download or view online.
2. Check the manual that came with your A/V stand. It may have been misplaced, but it is worth checking to see if you can find it.
3. Contact the manufacturer. If you are unable to find a manual online or in the original packaging, you can try contacting the manufacturer and asking if they have a copy of the manual that they can send you or make available online.

I hope this helps! Let me know if you have any other questions.

We had this problem. Every time I had to remove the memory stick and plug in again. Not that easy with the USB socket at the back rather than on the side. I had been either just switching off with the remote or just unplugging the mains plug without exiting the USB mode. As soon as I exited and then switched off and then unplugged the mains plug it was ok.

I believe you have some shorted LED lamps on the backlight strips that are causing over current and shutting down the inverter protection circuitry.. New backlights should fix the set

The IR Sensor is always on the front near the bottom behind the red window. There is help in the link, but not a manual for repair. https://www.google.com/search?q=bush+le-50gy15-m1+repair+manual ..

It's the opposite of taking it apart, hope you took some pictures so you know how it goes back together

Apparently not https://www.google.com/search?q=Bush+LE-40GB01-C+TV%2C+remove+PVR+Time+Shift+Progress+Bar Depending on country, try to find a software update. This is often mentioned in the manual and accessible via settings. https://www.google.com/search?q=bush+le-40gb01-c+software+update ..

If this is them, contact them direct. People rarely buy universal remotes these days because you can get facsimile remotes which are an exact copy of the original. https://www.totalcontrolremotes.com/ If some buttons work and some done, then the remote itself is faulty. ..

1. Connect a USB storage device to your TV.
2. If media is present on the USB device, the Media Browser will automatically load.
3. Press OK to view available videos on the USB device.
4. Scroll to a video and press OK to start it playing.
5. The video will now play.

https://g.page/r/CaGTqqJEio7XEAE

my stand by light is k on my bush tv and wont come bk on

Unfortunately there is nothing listed for it. https://www.google.com/search?q=bush+pdvd+116+make+region+free ..

Using the model number of the TV, DLED32HDS, and replacement remote control leads to several replacement remotes for sale that will work this TV. One option is https://www.amazon.co.uk/Replacement-Remote-Control-Compatible-DLED32HDS/dp/B08H8V4S5C . Another is https://www.remotesca.com/products/replacement-rc4391p-remote-replacement-for-bush-dled32hds-dled49fhds-tv . I hope this helps. Cindy Wells

Contact manufacture

Probably a backlight problem in the display. Some LEDs will have failed

Most modern TV's now use the remote for All of it's functions. The buttons on the actual TV will be somewhere on the edge of the TV body. Look at the back of the TV. There should a set of 2 or 3 small push buttons on the lower left or lower right outer corner of the back panel. If they are not there slide your fingers along the bottom edge of the TV. Sometimes the buttons are 'tucked' underneath the Name badge on the bottom, middle edge of the TV.

Try a hard reset