RCA RTD160 System - Page 9 - Answered Questions & Fixed issues


If your RCA TV has left and right audio outputs on the rear, connect them to corresponding inputs on the rear of your Kenwood receiver.

RCA Audio... | Answered on Jan 09, 2017 | 63 views


Google manual and read it

RCA Audio... | Answered on Jan 03, 2017 | 61 views


what buttons do you have on it .

RCA Audio... | Answered on Jan 03, 2017 | 285 views


Could be an internal fuse in the power supply area. Follow the mains cable. However the fuse blowing could be the sign of a fault. If it blows straight away again there is a fault.

RCA Audio... | Answered on Jan 02, 2017 | 87 views


to us on fixya , absolutely nothing . this is not an appraisal site

RCA Audio... | Answered on Jan 01, 2017 | 29 views


Could be an open internal fuse or power supply failure

RCA Audio... | Answered on Dec 03, 2016 | 60 views


There's an earlier model on the RCA website, which might be the same as yours. You can have a look and see.
http://www.rcaaudiovideo.com/audio/voice-recorders/?sku=VR5230

RCA Audio... | Answered on Nov 21, 2016 | 99 views


seems as tho by using a computer and viewing what is there and moving them off . reverse of how you added them

RCA Audio... | Answered on Nov 21, 2016 | 165 views


Any fuse will be located near the mains entry point of the system. It's possible that the unit might have been knocked in the move. This could cause a dry solder joint anywhere inside. Also if the thing has a voltage selector make certain it's fitted in right and not damaged.

RCA Audio... | Answered on Oct 21, 2016 | 119 views


Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

RCA Audio... | Answered on Oct 20, 2016 | 179 views


RCA remote control have no set-up code to Curtis devices. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability. Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the sites.
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/
Universal remote controls are available at most of the electronic spare part selling shops. Visit some on-line sites too, which deals with electronic spare parts.

RCA Audio... | Answered on Oct 12, 2016 | 55 views


You could have speaker wires shorted, putting unit in output shutdown. check them. Turn unit on and listen very closely for about 5-6 seconds for a click (the relay for okay output condition). If not heard, have unit serviced or check for blown output fuse. Of course they don't blow without a reason.

RCA Audio... | Answered on Sep 21, 2016 | 189 views


Could be faulty belt or damage to the mechanism, even a foreign object if you have young kids!

RCA Audio... | Answered on Sep 16, 2016 | 132 views


If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
Firmware (Software) update procedure of many popular brand TVs and other devices are given in detail.

RCA Audio... | Answered on Sep 12, 2016 | 183 views

Not finding what you are looking for?
RCA RTD160 System Logo

Popular Tags

56 questions posted

Ask a Question

Usually answered in minutes!

Top RCA Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

76099 Answers

Gyula Lacz

Level 3 Expert

486 Answers

Cindy Wells

Level 3 Expert

5944 Answers

Are you a RCA Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...