20 Most Recent Pc Ware PC CHIPS: PC-Chip M957G V1.0/LGA775/PM800/DDR400/A&V&L/MATX Motherboard Questions & Answers

I can't seem to find a product with the model number "BT-PCI-SATA" that you provided, on the Bytecc web site. You should shut off and open the computer and read the model info directly from the the I/O card to determine the exact model card you've got.

Once you which card you have, you can download drivers directly from Bytecc. There appears to be very limited support listed for both Vista & Windows 7 OSes however. If nothing else, you'll be able to download the latest version of the driver - that may support Windows 7 - without specifically stating that it does.

If you're trying to install Win 7 to boot from a hard drive connected to this controller, it may work if you supply the expanded driver on USB, floppy, etc. when prompted for a SATA driver. Bytecc only offers an email address for tech support, so you might want to send them a detailed note about the problem at: [email protected]

Hopefully, this helped - good luck!

I had to jumper the drive to slow it down. Then it does not show on the first cmos screen with the dvd drive, but the system does show it in the boot order and does find it.

check smps & buffer 

Hi voyager99,
You can download the driver, (VIA 8237 SATA/RAID driver) from PC Chips but I doupt it will help.
If your bios did no see the 250GB drive than the onboard SATA controller is defective. This can not be fixed.
http://www.pcchips.com.tw/PCCWebSite/Products/ProductsDetail.aspx?detailid=305&DetailName=Driver&MenuID=1&LanID=0
Running the SATA/RAID driver will most likely not help the bios see your drive.
Buying a PCI serial SATA controller card may allow your SATA drive run but it will run at the PCI bus speed. A decent controll card may cost as much as a new board that will run your current devices.

Good luck!
Mike

try and check the manual you will see the picture there thanks

This is a PC-Chips model M957G and is still in production.
Google is your friend.

Sounds like your memory.

How many sticks do you have in it?

Try removing all but 1, or moving that 1 around. You'll have to reset the bios and let it set without power for about 5minutes, between each try.

sounds like the motherboard has failed. I had those same symptoms this summer. Replaced m/b and it's good again.  Did you count the 'continuous' beeps? That's a code to say what is wrong.

go to ibm support download from there

Does it blink very fast?
To test if it is the monitor try it on another computer.
Trying to resolder probably made it worse a part needs to be changed and might cost more than a new screen lol.

You need to look at the motherboard and find the model number and then search the internet for the maker of the board.find out what the Video is and download the proper drivers.almost every site has its drivers. I’m happy to help further over the phone at https://www.6ya.com/expert/william_83fc156eee2b555e

DICEUS with 13 years experience. SIMFORM for modernizing legacy architecture. ColorWhistle for leads. PixelCrayons for tailoring to your specific needs.

If you are in the middle of a contract, then cutting your wages is almost certainly a violation of your employment law rights. While I am by no means an expert on this matter, I did have a similar issue years ago - mid-contract wage cuts - and I hired anemployment attorney to fight the case on my behalf. It turned out that my employer was basically looking to scare people into taking the wage cut. They got into some pretty serious legal trouble for their transgression, and nothing happened to me in terms of wage cuts after that. If you are between contracts, your employer can re-negotiate your salary, but as far as I am aware, if you are in an agreed-upon contract, they cannot just decide to reduce your salary. If you want to settle matters, contest this action with support from a legal professional.

Keep a backup on your hard drive or a backup. The backup system is a free service supplied by your internet provider. If you use it daily or after every update, there will never be an issue.

YouTube Backlink Generator https://ovdss.com/apps/youtube-backlink-generator

clarify pi please. if you meant pi to mean main screen picture, you probably have used up your free time on this program.

u need tally 4.5 free software (full ) if u need mail me i will give u link k

This fault / alarm / warning is not listed anywhere and the company is no longer in business. Turn over the console and see if there is a door for a back up battery. It may be warning that it is running out. Do the same with the main control unit. You could also try powering off the main unit for 10 minutes to reset the software. https://www.google.com/search?q=dukane+model+no+acc5+administrative+control+console+chirping This is the unit that drives your admin console http://serialsistemas.com.br/duk/2/85101-0025%20--%20MCS350.pdf ..