Samsung DLP HL-P5663W 56" TV - Answered Questions & Fixed issues

sure!!!...y him..

Samsung DLP... | Answered on Jan 13, 2019 | 398 views

we are not samsung why ask us?
ask them it is there design, we dont do that here.
Samsung UE48H6200 48 Inch Smart 3D LED TV why post TVs to computers and not TVs forums.
ill move you now.

Samsung DLP... | Answered on Nov 13, 2018 | 47 views

You can find a new Samsung replacement Lenticular screen and fresnel screen for a model # HL-P5663W from a major Samsung distributor at the following links:

Samsung HL-P5663W Replacement Part Fresnel Screen

Samsung HL-P5663W Replacement Part Lenticular Screen

Samsung DLP... | Answered on Oct 18, 2018 | 465 views

if it goes black but the light is still working the dlp chip is failing this is like a small lcd screen that the light use for the piture to work looks like this hope this help you.

Samsung DLP... | Answered on Jan 30, 2018 | 202 views

If you have a way to do it you can measure the current draw of the lamp, that will tell you if its close to failing

Samsung DLP... | Answered on Jan 28, 2018 | 275 views

Considering it runs for an hour then fails it must be a heat issue, the heat builds up then it starts to fail. Have you checked that the fan is actually running after cleaning it? Its usually pretty easy to hear and you should feel airflow from it, and it should be moving a good amount of air. The only other suggestion i could make is something on the main circuit board inside is getting hot/failing, could be bad capacitors, could just be dust buildup, but since you said you cleaned inside i wouldn't think its buildup anymore. It might just be something failing from age. I know i post this over and over about TV's on Fixya, but THE MOST common issue i face with any TV repairs is generally failing/leaky capacitors on the power supply. I keep a large box of various values of capacitors and its about a 99% success rate fixing them by replacing aged capacitors.

Another thing you can try, let it cool of a while, remove the back cover and leave it off and put a small fan nearby blowing in, then turn it on and see if it stays on longer, that could help rule out a cooling problem also.

Samsung DLP... | Answered on Jan 12, 2018 | 942 views

Time for a new TV... Unless your really really really attached to that TV your going to spend more money on it then its worth to try and troubleshoot and repair it. Most of the TV's that come across my bench for repair that have developed lines and color splotches go into the recycling dumpster, they just aren't worth the time to repair as it usually comes down to a bad board or components that just can't be obtained to repair it. What most people don't realize is that once a tv is a couple years old there just isn't service parts for them anymore. The manufacturer keeps parts available until the warranty period is up on a model then its done for.

Samsung DLP... | Answered on Jan 02, 2018 | 228 views

What do you expect from a Korean TV. These Samsungs and LGs are notorious for quality control. Get a Toshiba, JVC or Sony... if you have a blank check Lowe Opta is the very best.

Samsung DLP... | Answered on Sep 02, 2017 | 290 views

It is a signal issue.

Samsung DLP... | Answered on Aug 02, 2017 | 193 views

I unscrewed the panels on both sides of the tv to find out that the lamp was not turning on. What I did was I got my broom, tapped the lamp with it about 3 times when it was turned on, turned it off, tapped the lamp 3 more times, turned the tv on and it started working again.

Samsung DLP... | Answered on Jul 30, 2017 | 329 views

your question does not help us or you as we do not know your problem .

Samsung DLP... | Answered on Jun 09, 2017 | 2,726 views

Color wheel problem. replace it. If you wish to get some details; visit the site linked here. Pull up older posts.

Samsung DLP... | Answered on Jun 04, 2017 | 148 views

Just adjust your cable while looking at the screen, the diagonal lines will slowly disappear

Samsung DLP... | Answered on May 29, 2017 | 52 views

Replace the TV, the cost to repair is about what new costs.

Samsung DLP... | Answered on May 18, 2017 | 253 views

Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" to your device, in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

Samsung DLP... | Answered on Apr 29, 2017 | 67 views

some bad solderings, contacts, much deformed and or leaking capacitors

Samsung DLP... | Answered on Sep 20, 2016 | 80 views

Your drive is setup as ntfs it needs to be formatted to fat32 via Windows and if Windows won't let you format it to fat32 you need to use a drive partitioner program you can find several free ones on the webz

Samsung DLP... | Answered on May 28, 2016 | 572 views

Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts.
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.

Samsung DLP... | Answered on Apr 24, 2016 | 39 views

Not finding what you are looking for?

1,318 questions posted

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76060 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers


Level 3 Expert

512 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides