My LT-P227W refuses to go into Menu mode from either the remote or from the local button on the top...
(More)
My LT-P227W refuses to go into Menu mode from either the remote or from the local button on the top of the unit. As a result, and since I am over the air free tv watcher, I can not retune to any new or old channels making the set useless even if I move it from one to another room of the house. I repowered the set several times and after waiting several minutes in between, I looked for any consumer reachable "reset", but luck. So, I decided to pay and called Samsung. They immediately recommended i mailed them the unit, but could not give me any info on how they would charge (per hour, per problem, ...). Upon asking them to connect me with their service to just take couple minutes of their time, the number I called ended up being routed back to Samsung (it was their East Coast third party that I was supposed to reach). So, anyone, please help. Yes, I can hold a screwdriver and can open the unit to look for the solution you provide. THANKS! nisava@aol.com I called Samsung who connected me to
I purchase a Samsung LCD TV series 5 and I did not notice that the LCD TV is having only 240V,50Hz...
(More)
I purchase a Samsung LCD TV series 5 and I did not notice that the LCD TV is having only 240V,50Hz frequency. I am planning to bring my TV back home and our country uses 240V, 60hz. Is there a problem if I plug my TV on a 240V, 60hz frequency?
TV has color issues. The tint is unable to be adjusted. We are not even able to select the tint...
(More)
TV has color issues. The tint is unable to be adjusted. We are not even able to select the tint option to adjust the hue. I have looked extentively on the Samsung site and even found troubleshooting reguarding it and had no luck. Any insite on this would be appreciated!
If I pull out the plug and reinsert it the red standby light will flash on and off a few times and I...
(More)
If I pull out the plug and reinsert it the red standby light will flash on and off a few times and I will get the startup tone but no picture.
I want to use External Tv Tuner of Umax with my PC. No when I turn on tv tuner the iball 19"...
(More)
I want to use External Tv Tuner of Umax with my PC. No when I turn on tv tuner the iball 19" LCD displays out of range. How to fix the frequency of LCD??? Any suggestions???? Fast....
The unit will not power up. I tried using a different power cord to see if the old cord was bad. A...
(More)
The unit will not power up. I tried using a different power cord to see if the old cord was bad. A small red light turned on for afew seconds, I heard some beeping, then the red light went out.
I have this set for little more than 2 years. It operates both as desktop monitor and TV. I always...
(More)
I have this set for little more than 2 years. It operates both as desktop monitor and TV. I always had problem with itsince day 1, it's losing the signal when on the standard non-HD input (but that's the one that allows P-i-P with the PC signal). It would totally disappear-replaced by the blue screen. This was relatively easy to fix-I just unplug the cable on the back for few secs and it always works.
Lately all of a sudden when the on-screen menu button is activated; both from the remote and from the set,the picture would distort into scrambled diagonal stripes-sound is audible-OK and the menu buttons operate as much as you can see thru the scrambles, but basically the image is so distorted that noone can make what the menus read thus nothing can be done with the menus. All other buttons operate normally.Switching the menu off restores the normal picture, and there seems nothing else is wrong with the TV.
Has anyone have any suggestions on this.I tried tinkering with the PC's video card, but to no effect
Thanks
The problem:Press the power button and the led turns blue, but nothing happens. I figured out that if i unplug the set then plug it back in it worked....
written by stiv0
Vizio Tv's have an extra menu that contains factory settings which you can change or fix should you have a problem with your TV.
Here's how to...
written by TechNerd
If an LCD TV has sound but no picture do the following: Use the source button to ensure that source is not set to the wrong input.
Try unplugging...
written by ginko
The first thing to check is the cables connected at the back of the TV.
Check cable connection, and try using a different cable, video signal
is...
written by ginko
You can help other;s and maybe they will help you. This can be done by
uploading a copy of you user manual and any service information for...
written by stoneheaded
The codes are at this website:( http://tech.dishnetwork.com/departmental_content/techportal/content/tech/remotes/TechRemo5.3Code.shtml ) Just put the...
written by stoneheaded
All Polaroid flat panel I have a FLM-3203 32 inch LCD. After reading so many posts on replacing the to 10v caps I decided to do this to mine. After...
written by prowler21
When you have a damaged or unrepairable television it may seem like a total loss and ready for the trash. Instead of trashing the television, why not...
written by stoneheaded
Most people just put their plasma TV on a stand on a table or other furniture. But what fun is that? One of the cool things about having a TV that's...
by wikihow
If you have an old TV but want to watch DVDs, you may have difficulty hooking up your DVD player. Most DVD players have a yellow RCA video output...
by wikihow
SERVICE/REPAIR OF TELEVISION AND ELECTRONIC EQU... Read More
SERVICE/REPAIR OF TELEVISION AND ELECTRONIC EQUIPMENT, TECHNICAL CONSULTATION, REPLACEMENT OF LAMPS IN LCD AND DLP PROJECTION TELEVISIONS.
QUALITY SERVICE AND REASONABLE PRICES.