http://www.fixya.com/support/p205385-hp_digital_projector_vp6120_multimediaSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comSun, 06 Dec 2009 21:59:13 GMT80http://www.fixya.com/support/t2438740-hewlitt_packardI have a Hewlitt packard vp6120. The projector turns on and goes into the main hp logo screen and counts down from 15 then the bulb stops projecting. On top of the projector the overheating LED is flashing as well as the power button. The manual says...Sun, 06 Dec 2009 21:59:13 GMThttp://www.fixya.com/support/t2372968-projector_turns_power_light_flashingunit turns on fine te the bulb turns off and as described above power light flashes and bulm light stays solid checked all fansSun, 06 Dec 2009 21:59:13 GMThttp://www.fixya.com/support/t254113-change_lamp_didnt_help_lamp_indicatorThe customer left the HP 6120 beacuse it didnt start, i saw that the lamp error indicator lighted, i can start the projektor and all the fans starts up, i ordered a new lamp and replaced it, but after a couple of seconds the lamperror led indicator...Sun, 06 Dec 2009 21:59:13 GMThttp://www.fixya.com/support/t367867-projection_dimThe image is so dim. The projector is working properly then suddenly the image is so dim. The error indicator is not lighting up, it projects the image but it is so dimSun, 06 Dec 2009 21:59:13 GMThttp://www.fixya.com/support/t1527360-projector_proects_tilted_imagehp6120 projecttor was working fine and suddenly it started projecting the iamge tilted . the bottom of the iamge is paralle to ground bout the upper edge of the image is non parallel to ground its tilted how can i solve thisSun, 06 Dec 2009 21:59:13 GMThttp://www.fixya.com/support/t551960-maybe_bulb_going_badIntermittant problem. Seems like the bulb flashing or breaking down. Can't tell if it is electronic. Could it be bad bulb connection.Sun, 06 Dec 2009 21:59:13 GMThttp://www.fixya.com/support/t323732-hp_vp_6120_projectorWhen I turn on the projector, the bulb lights for about 10 seconds,, and then goes out. ?What is the problem?Sun, 06 Dec 2009 21:59:13 GMThttp://www.fixya.com/support/t461941-lamp_offwhen we use hp vp 6120 dijital vedeo projector within i minute lamp off. again few minute we can on again one minute offSun, 06 Dec 2009 21:59:13 GMThttp://www.fixya.com/support/t461504-projection_dimThe image is so dim. The projector is working properly then suddenly the image is so dim. The error indicator is not lighting up, it projects the image but it is so dim I changed the bulb and since then the projector light got very dim.Sun, 06 Dec 2009 21:59:13 GMThttp://www.fixya.com/support/t176175-tc1000_projector_problemsI use a TC1000 for teaching, connected to an HP VP6120 projector. The set-up works fine for most things, but I am unable to project video streams (mpeg, etc). HP has advised me that, to display video streaming, the projector needs to have...Sun, 06 Dec 2009 21:59:13 GMThttp://www.fixya.com/support/t249641-sharp_digital_multi_media_projector_pgScreen show keeps cutting out for 5 - 20 secs?although the projector is still operating?and somes back on again for 5 mins or there abouts.Adrian AllenSun, 06 Dec 2009 21:59:13 GMThttp://www.fixya.com/support/t253923-projectorGot a Saville NPX3000 projector. Powers up ok and tells me it's autosearching but won't display my computer. I got no manual with it so don't know if it's just me being daft.Sun, 06 Dec 2009 21:59:13 GMThttp://www.fixya.com/support/t235657-proxima_ultralight_projector_projectI have just gotten a proxima ultralight projector without any directions and I am a novice. I connected the monitor cable to the projector, and the projector cable to the monitor input on the PC, turned the projector on but get no image. No light...Sun, 06 Dec 2009 21:59:13 GMThttp://www.fixya.com/support/t401925-lcd_projector_no_signal_messageWhen I connect to a projector, I get a no signal message. The Windows startup screen is visable but disappears and the "no signal" message appears. the remote can only turn acer PD726W projector on and off. Message says no signal. tried to turn...Sun, 06 Dec 2009 21:59:13 GMThttp://www.fixya.com/support/t405555-epson_powerlite_7700p_video_problemsprojector is displaying a purple hue with a Toshiba laptop connected. Display on laptop is normal...Would the bulb be going bad?Sun, 06 Dec 2009 21:59:13 GMThttp://www.fixya.com/support/t409105-smps_repairingdear sir, i have lp240 projector. m/c is down. can u give the solution for that?????Sun, 06 Dec 2009 21:59:13 GMThttp://www.fixya.com/support/t320345-convergance_problem_hitachi_51asked at earlier date about convergance issue. very strange, sometimes we turn on set and within 30 seconds, picture is perfect, other times longer. any chance there is a factory reset on t.v. that would put it back when picture is clear?Sun, 06 Dec 2009 21:59:13 GMThttp://www.fixya.com/support/t435625-infocus_projectori have an infocud ls projector also i have an laptop , im tryimng to view it says in need to adjust color , also it keeps blinlkingSun, 06 Dec 2009 21:59:13 GMThttp://www.fixya.com/support/t435813-colourHi I am having a problem with the red colour from the projector onto an interactive whiteboard. I have adjusted the colour setting but it still looks almost black instead of red. Regards Chris I have the Epson powerlite 7700p The whole left side of...Sun, 06 Dec 2009 21:59:13 GMThttp://www.fixya.com/support/t447951-acer_pd_112_projectori have acer pd 112 projector but off late its developed a problem, it gets shut off in 2 to 3 minutes of operation. and the lamp indicator turns orange / red but intially when its lit up it appears to really bright . has the life of come to an end or...Sun, 06 Dec 2009 21:59:13 GMThttp://www.fixya.com/support/t461571-color_problemI purchased a used Ask Protima m2+ projector and everything works fine except the color red which appears very dark, close to black. ?I am using an older ibm thinkpad laptop with Windows 98. ?I have reset the projector to factory settings and...Sun, 06 Dec 2009 21:59:13 GMThttp://www.fixya.com/support/t469015-panasonic_pt_lb50ntea_password_problemhow do i reset my password if i cannot rember it and where can i find a free manual for itSun, 06 Dec 2009 21:59:13 GMThttp://www.fixya.com/support/t498105-get_projector_computer_connect_no_imageour viewsonic projector has been working fine for months, but as of friday, the status message is "searching for source" eternally! we have tried 3 different computers and 2 different "cords" and nothing is working. help!Sun, 06 Dec 2009 21:59:13 GMThttp://www.fixya.com/support/t518553-philips_sv2_lc4431put new bulb in machine starts but wont illuminateSun, 06 Dec 2009 21:59:13 GMThttp://www.fixya.com/support/t521211-rewinding_internal_spring_retractableI have a Da-lite tripod screen that was having problems retracting so I decided to pop off one of the end caps to see what was going on. BAD IDEA! When I pulled the cap off, I could hear the internal spring mechanism spin the axle as it was release...Sun, 06 Dec 2009 21:59:13 GMThttp://www.fixya.com/support/t521333-infucos_in72_multimediahow do i configure the infucos projector, but we no have menu appear in the screen?Sun, 06 Dec 2009 21:59:13 GMThttp://www.fixya.com/support/t524997-panasonic_pt_l501u_projectorSwapped power supply... and same issue... what next?Sun, 06 Dec 2009 21:59:13 GMThttp://www.fixya.com/support/t526695-display_problemmy projector model infocus IN72 the problem is they can display but also white output only and the menu settings did not display on the screen ..what they are the soulution is that problem?Sun, 06 Dec 2009 21:59:13 GMThttp://www.fixya.com/support/t527251-lcd_projector_shadow_in_green_colorHi, I have a PC connected to my EPSON LCD projector. Everything displayed has a kind of a shadow: the mouse cursor for instance is seen twice. Using a monitor tester program, displaying horizontal and vertcal lines, it looks like the Red and Blue are...Sun, 06 Dec 2009 21:59:13 GMThttp://www.fixya.com/support/t535601-epson_elp_3300_powers_up_bulb_lightI just put a new Bulb in my ELP 3300 bulb warms up goes to green but power light go's to green briefly and then to orange and stays in stand by mode and wont come off PLEASE HELPSun, 06 Dec 2009 21:59:13 GMT