20 Most Recent
Gorenje W7543LR Red 600 mm Washer Front Loading, 7 kg, A Energy Rating - Page 8 Questions & Answers
It has 2 and lock will not start
'make model (what it is)' in all questions first 3 words please.There are over 40,000 categories to choose from.Googlemake model lock symbolormake model manualIt may be the child lock, so look for that in the manual..
My Hisense fuzzy washing machine WTQ1602S is not spinning just give an E3 code
An E3 code is the machine detecting an issue with the machine not draining water correctly. Unplug the machine from the main power supply then remove and clean all the filters on the machine. The washine machine can reset if left unplugged for at least 15 to 20 minutes. Unplugging it first then cleaning the filters will take at least that amount of time.
Hoses are connected correctly. Only hot water. Turned hot water valve off and hot water still ran instead of cold. HELP
Backflow from convection and from expansion of water in the hot water tank is pushing heated hot water backwards, into the cold water supply line, wasting that heat. Install a backflow preventer. A quick test for that issue is to partially throttle the water entering the heater, but do not reduce it to a trickle, let the tank overheat and be damaged! If water in the outside tap is now noticeably cooler, backflow is at least one culprit. Reopen the heater valve after testing!~
My washer is doing the same. It will not agitate or spin. The door switch and fuse link are okay but no power on red/white wire.
Your washer is doing the same as what? No context.
Click EDIT on your post and remove "My washer is doing the same." Replace with 'make model washing machine'.
At this point no one knows what the red/white wire goes to? If it goes from the control board to the motor controller, it would suggest the board has failed. They are expensive, so I always recommend professional diagnosis so you get warranty on the part and the repair.
If the motor was humming, not clicking, it would suggest the start/run capacitor need replacing. 'Clicking', sounds like it is a motor controller.
How old is my amana whirlpool washer model number
The date of manufacture is actually determined by the SERIAL NUMBER on your appliance. If this is a Whirlpool, the following link explains how to determine how old the appliance is:
http://www.fixya.com/support/r3576437-determining_the_age_of_your_whirlpool_ap
The 1st 2 NUMBERS in the serial number determine the week it was manufactured. Just count the weeks of the year on a calendar and this will tell you the MONTH.
The 2nd digit in the serial number determines the YEAR it was manufactured.
If you have any questions about how to determine this on your appliance, post back with your serial number and I can explain it for you. I hope this helps you.
I have a Kleenmaid / Speed Queen KAW393. Normal cycle won't work. Other two cycles work.
The Manual is dated June 1996, so I am guessing your machine is past the 5 year warranty period?
https://kleenmaid.com.au/wp-content/uploads/2021/06/KAW393_38430_june96.pdf
I would say your husband's diagnosis is sound. Ask him to check the wiring tag connections to the timer first. They may be oxidized. It is a mechanical timer driven by an electric motor with internal contacts, so he could even try spraying some switch cleaner into the timer and rotating it a few times. The 'Normal' cycles are the ones you use the most, so the contacts get worn more.
There is absolutely no way I would pay $600 for a timer on an old top loader like that even $AUS to $USD is $400. They are virtual dinosaurs in these days of high efficiency front loaders. Just as big, use less water, less detergent and a fraction of the cost to heat and run.
I have a Whirlpool Duet front load washer and dryer matching pair. They are about 16 years old, love them.
Not finding what you are looking for?
