Trying to figure out cap change problem. I have 9 total 1u 10 16v caps instead of 11 on my...
(More)
Trying to figure out cap change problem. I have 9 total 1u 10 16v caps instead of 11 on my hypermodule. cx270 is 10 10s 4p3 and cx230 is y (?) 10 10v WHAT'S UP???
my tv has had problems and after the whole digital transition its been weird it wont turn on at...
(More)
my tv has had problems and after the whole digital transition its been weird it wont turn on at times and the red light (wich turns blue when it turns on) will only dim when i finally get it working it has multicolored barcode effect and it wont do anything
Hi Terryfic, I found your post about potentially solving the 65HX81's continous blinking red light....
(More)
Hi Terryfic, I found your post about potentially solving the 65HX81's continous blinking red light. As you probably know, this set isn't worth a few hundred dollar repair, so I was hoping you might be able to lend a hand as far as providing a step by step on replacing the parts (caps or whatever) in order to fix this thing cheap. Thanks... Ryan
My son was watching TV when it went out. The light where the power is keeps blinking red. I think...
(More)
My son was watching TV when it went out. The light where the power is keeps blinking red. I think is was due to a power surge when there was a storm. I would like to solve this problem. I called a repair guy and he said he could not fix it. I think he took some parts out not sure. Can you help?
This is my first attempt at TV repair. I was given this if I wanted it to fix. I have researched a...
(More)
This is my first attempt at TV repair. I was given this if I wanted it to fix. I have researched a lot of leads from different sites. On first inspect, blown F850 and F852 on deflection board, replaced fuses hold. TV did power up then went off. Red power LED is on steady. On power up now, supply powers show then shut down. I understand these utilize a protection circuit, but what is the best way to narrow down what is shutting down this circuit. I have read a lot about the life expectancy of the convergance IC's. Would this be a safe place to start? And while I have this apart I plan to replace a few electolytics while I am in it. Any help on this is greatly appreciated. Thanks in advance......Bill
Try first leaving the TV power cord unplugged for some times, let say one hour or so. Also
ensure that the fault is not coming from a faulty receiver...
written by ginko
FL231. FUSE.... The RCA ITC22 chasis has a common problem. and it not all that difficult to repair. Does your rca projection tv have read blue and...
written by willtab
Here are some of the most common symptoms and example pictures for projection TV convergence problems. This is a very common failure on Projection TV...
written by Ecollier2012
Here are some of the most common symptoms and example photos of a convergence problem. This is a very common failure on Projection TV sets. Screen...
written by Ecollier2012
Your TV may have a convergence problem. Here are some of the most common symptoms. Screen looks 3D One or more colors can't be adjusted when using the...
written by Ecollier2012
You can help other;s and maybe they will help you. This can be done by
uploading a copy of you user manual and any service information for...
written by stoneheaded
Call 1-800-447-1700 Consumer Electronics Technical Dept. GE sold out to: Thomson, Inc. P.O. Box 671988 Marietta, GA 30006-0034 I called this company...
written by jrleopards
I received a full refund for this tv, Monday Oct 6, 2008. Thomson had a courier pick up this tv at my home 2 weeks ago. Just call the numbers I have...
written by jrleopards
SERVICE/REPAIR OF TELEVISION AND ELECTRONIC EQU... Read More
SERVICE/REPAIR OF TELEVISION AND ELECTRONIC EQUIPMENT, TECHNICAL CONSULTATION, REPLACEMENT OF LAMPS IN LCD AND DLP PROJECTION TELEVISIONS.
QUALITY SERVICE AND REASONABLE PRICES.