20 Most Recent Toshiba 27A34 27" TV Questions & Answers


Check the remote control for its infrared emission. Check it with fresh batteries. Check it by pressing all the keys. You can detect the presence of infra-red emission from the remote control, using a cell-phone camera. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. In some cases, the remote control might need to clean.
http://electronicshelponline.blogspot.com/
http://homenol.blogspot.com/
http://remotesearch.blogspot.com/
Search the site by type in this key phrase "how to test a remote control "in the "search box at the top right of the display window of the Homepage" to get the related post quickly.
https://youtu.be/wUpnETSm6_k
https://www.youtube.com/watch?v=jsSCNCW3IbQ [open and clean]
https://www.youtube.com/watch?v=Qp-l1uh-5gE [open and clean]


Toshiba 27A34... | Answered on Nov 06, 2017


Not possible without a remote control.

Toshiba 27A34... | Answered on Jun 25, 2015


On the TV or Remote there is a button called AV/input/source, press this and select the input the wii is connected to.

Toshiba 27A34... | Answered on Sep 06, 2014


Easy fix if you have a solder iron, solder, and a 100uF, 50v capacitor. This picture shows the capacitor (Green) after replacement. This symptom is called "Fold Over". Simply replace the shown capacitor with the same value and you will be all set. Project time < 30 minutes. -milkburp9e9db24.jpg

Toshiba 27A34... | Answered on Aug 18, 2014


Sorry fellow fixya user you cant its what happens when a tv is old or pad quality it cant be fixed the same thing happened to mine and thats what the repair man told me.
~GURTRUDE~

Toshiba 27A34... | Answered on Feb 24, 2012


Depending on the universal remote you can usually program the remote without knowing the codes. One way is to turn on the television, then follow the basic programming instructions for the remote, but instead of entering a code, hit the power button over and over again until the television turns off.
I hope this helps.
Ken

Toshiba 27A34... | Answered on Nov 26, 2011


Your Toshiba 27" has a 480i maximum signal input. It's a Standard Definition TV.

It scans at 480 interlaced lines.

Toshiba 27A34... | Answered on Mar 05, 2011


hello, usually if the remot control is ok, then the infrared receptor need to be replaced, he is placed near the stand by light.
in a rare case the problem is at the 5v voltage that goes to the receptor. more rare is the possibility
that something is wrong at the microprocessor circuit.
i hope it was helpful!! Let me know if you need further guidance

Toshiba 27A34... | Answered on Feb 25, 2011


Hello. If this has not yet been resolved, I have some simple steps for you that will help you out.
First off, it sounds like the remote needs to be programmed, and since I do not know the particular DISH remote you have, here are the steps for a power scan, which will scan the TV for the correct code.
1. Hold down the Clear TV button until all lights at the top of the remote light up
2. Press the red TV POWER button
3. Press and release the up arrow on the remote about once a second until the tv turns off.
4. When it turns off, press the # (Pound) button
5. Try powering the tv on/off, and try the volume. If one or more of these functions do not work, start over at step 1 again.

Then once you are on 73, that picture will work. You can also try the alternate channels, which are 22 and 21. That may also give you a picture. I hope this helps!

Becki Barned
DISH Network Customer Service

Toshiba 27A34... | Answered on Feb 23, 2011


If you have a vcr, set it on channel 3 or 4 to match the tv, hook it to your set and use it as your channel changer until you can come up with a better solution.

Toshiba 27A34... | Answered on Jan 17, 2011


On some of the crt televisions you could channel down 5,4,3,2 and then they would go into the line input that way.. Other wise you can get a universal remote and get in.. Im not for sure on the older Toshibas but its worth a try!

Toshiba 27A34... | Answered on Oct 17, 2010


Several lines acroos the screen at the top along with picture is a typical fault. You are seeing vertical retrace lines. Either the supply smoothing capacitor to the power supply given to vertical output Ic or vertical output capacitor connected to the vertical output pin of that Ic may faulty. Usually the supply smoothing capacitor seen faulty. It may be over 1500Mfd eletrolytic capacitor used there. It may get value reduced by 40 percent or so, this falult will occur. Please replace the two capacitors together and will get the result.

Toshiba 27A34... | Answered on Oct 15, 2010


hello Smith_Bradle. you need to find a remote control, there is not TV/VIDEO control menu on front panel where you can access between the inputs.

Watching video input
You can use the TV/VIDEO button on the remote control to view a signal
coming from other devices, such as VCRs or video disc players that
may be connected to your TV.
jkahangwa

Toshiba 27A34... | Answered on Jun 25, 2010


Hi
You mean a CRT type TV. What is making the humming sound is the power supply. You probably have two problems, one the HOT is bad and the flyback and two an electrolytic in the power supply is bad. You'll need to take this to a reputable repair person. However, the price of the HOT, flyback and at least one electrolytic will be more than a flat screen monitor at Wal Mart. Unless this monitor has some kind of sentimental or mission critical value, I would just a new one.

Toshiba 27A34... | Answered on Jun 06, 2010

Not finding what you are looking for?
Toshiba 27A34 27" TV Logo

54 questions posted

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76046 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Toshiba Televison & Video

  • Toshiba Televison & Video

Most Popular Question

tube tv no power buzzing sound when

  • Televison & Video
Loading...