Top 20
Panasonic Workio DP-150PA Copier Questions & Answers
Dp 1515 copier error E01-02
There is not supposd to be any E1-02,...THERE IS an E1-20, it is saying you have a prob in your "optics" unit, possibly even the Lser unit...you should probably have a service man determine exact prob.
How do you setup the
You might be able to download a manual here:
http://www.retrevo.com/s/Panasonic-DP-150-Copiers-review-manual/
I'm not sure that model supports emailing scans. I couldn't find it in the manual. Just setting up the fax phone book on page 139.
IP address problem
What problem? Need more info! On the Panasonic brand, you input the IP address through the "function" mode- "general" settings... go to last menu item "key operator" the code should be 3 or 4 zeros. Then go to the IP address item and enetr in the IP adress. Now you MUST TURN THE MACHINE OFF AND BACK ON TO LOCK IN THE IP ADDRESS! Go back into general setting and "print general settings" to see if it's still the same address.
I have a DP-150PA printing problem.
The drum (green roller) is causing your problem. If it has toner on it, cleaning it will not help...it may make it worse. The unit has a cleaning station built into it, and when it fails the drum unit needs to be replaced.
Error miss feed j87
just check all sensors in paper path .j87 shows inverter problem.MIAN AKHLAQ
Panasonic DP-150PA Light Copies to no copies
Have you reseated the drum and toner?
It can be a drum cartridge problem. have you tried that?
You say copy or print, so I am asuming this is multifunction and you do both printing and copying.
1, Have you shook up the toner cartridge well.
After the drum and shaking the toner, I would suspect the transfer assembly, Off hand I cant remember of that machine has a transfer roller, or if there is a channel where there is a hair fine wire running through it.
The wire may have broken, or if its a roller making poor contact.
The laser is also possible.The transfer will be on the right had door assembly.
Take the cartridges out and see if there is anything laying loose in the machine,
what you are describing sounds more like a drum or transfer problem.
sounds very much like a defective transfer. And again, could easily be the drum.
Did you have a jam just before this occured? If you had a jam in particular in the right hand door, you broke the transfer wire.
Yeah, i am rambling huh?
Dp-1820e rebooting not starting
you may try this:
unplug the network, usb, and fax connection
remove all papers
turn on the machine
press print key
press stop
press 1 for yes to cancel the job (if theres a job queue)
Seating the Drum?
Yeah, I just mean taking it in and out to be sure you have good connections.
Sorry for the delay, I couldn't find this responce for anything.
My blackberry screwed up and deleted my browser and the e-mail I received.
Error message on copier
That is a laser unit error. If resetting the machine's power doesn't clear it up, then it means the laser unit is dead/dying. If that's the case, your only choice is to replace the laser unit.
Not finding what you are looking for?
