http://www.fixya.com/support/p201884-sony_vpl_cs7_multimedia_projectorSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comMon, 13 Oct 2008 22:38:21 GMT80http://www.fixya.com/support/t472802-set_up_gone_next_useFor no known reason the setup is now gone when we get ready to do another presentation. Now we have to go through the menu and reset the brightness, etc, everytime we do another presentation. Have never had this problem before, we use the same...Mon, 13 Oct 2008 22:38:21 GMThttp://www.fixya.com/support/t296819-lamp_cover_will_not_close_fullyThe lamp cover is half open and half closed. I switch the projector on and the lamp indicator light flashes - the projector works for about 10 seconds and displays the output image on the wall but then the on/off button flashes green constantly and...Mon, 13 Oct 2008 22:38:21 GMThttp://www.fixya.com/support/t276503-remote_control_canon_lv_x6_projectorI cannot seem to get the remote control to work for the projector. I'm trying to use a PowerPoint Presentation and the remote does not work if I click the Left or Right click buttons. Could you tell me what I'm doing wrong?Mon, 13 Oct 2008 22:38:21 GMThttp://www.fixya.com/support/t284351-user_manualhi i have this new beetel walk clip caller id cordless phone but i do not have the users manual,so i cannot load the phone numbers in the phone book and also the phone just shuts down after i talk for a few mins,i have charged it for more than 20...Mon, 13 Oct 2008 22:38:21 GMThttp://www.fixya.com/support/t285029-infoucus_lp500_projectorMy InFocus LP500 projector has a pinkest image when connected to the Dell C840 laptop. I have update the display driver this did not solve the problem.Mon, 13 Oct 2008 22:38:21 GMThttp://www.fixya.com/support/t320345-convergance_problem_hitachi_51asked at earlier date about convergance issue. very strange, sometimes we turn on set and within 30 seconds, picture is perfect, other times longer. any chance there is a factory reset on t.v. that would put it back when picture is clear?Mon, 13 Oct 2008 22:38:21 GMThttp://www.fixya.com/support/t300089-projector_sharp_xr_20x_start_upWe have a fairly new projector- a Sharp multimedia projector, model xr-20x, that won't start up. We've gone through all the troubleshooting in its manual and it still won't start. The only clues that we've got to why it stopped working was, two...Mon, 13 Oct 2008 22:38:21 GMThttp://www.fixya.com/support/t249641-sharp_digital_multi_media_projector_pgScreen show keeps cutting out for 5 - 20 secs?although the projector is still operating?and somes back on again for 5 mins or there abouts.Adrian AllenMon, 13 Oct 2008 22:38:21 GMThttp://www.fixya.com/support/t261143-vt45_projector_turns_off_without_noticeThe projector turns off while in use. It doesn't really needto be "too hot". It may be in the first few minutes of use. Help! We've already had it repaired once before. It sometimes seems to help when the filters are vacuumed very clean. That's the...Mon, 13 Oct 2008 22:38:21 GMThttp://www.fixya.com/support/t268139-in_focus_x2_projector_display_welcomeIn Focus X2 projector won't display welcome screen. It turns on, the fan goes on too and the green light is steady. I have even changed the lamp but it it still won't work. I have had it for one year and a half. Thank you in advance for your help....Mon, 13 Oct 2008 22:38:21 GMThttp://www.fixya.com/support/t409499-sanyo_z2000_no_displayHi I have a new Sanyo PLV Z2000. I can power up the unit and the light indicator is green with the buld on, but all i get is the input that I selected which is HDMI 1 that is all that appears on my screen. At this point none of the buttons on the...Mon, 13 Oct 2008 22:38:21 GMThttp://www.fixya.com/support/t507461-optoma_h77_partswhere i can get optomal main board and power supply for optoma model h77Mon, 13 Oct 2008 22:38:21 GMThttp://www.fixya.com/support/t521333-infucos_in72_multimediahow do i configure the infucos projector, but we no have menu appear in the screen?Mon, 13 Oct 2008 22:38:21 GMThttp://www.fixya.com/support/t522953-panasonic_pt_l501u_projectorOk all the fans are running... lamp is striking and then green LED blinks and then goes orange and the lamp shuts off, then goes into cool-down and after that goes into standby LED red... then does not recover unless power off then on. If it...Mon, 13 Oct 2008 22:38:21 GMThttp://www.fixya.com/support/t535601-epson_elp_3300_powers_up_bulb_lightI just put a new Bulb in my ELP 3300 bulb warms up goes to green but power light go's to green briefly and then to orange and stays in stand by mode and wont come off PLEASE HELPMon, 13 Oct 2008 22:38:21 GMThttp://www.fixya.com/support/t536885-tdp_s8the screen of the projector is filled with black and white strippes as though there were no input. After I turn it on,the power light will remain orange for a few seconds while the screen will just be black.Not the usual Toshiba back ground and then...Mon, 13 Oct 2008 22:38:21 GMThttp://www.fixya.com/support/t538409-banding_problem_benq_w5000_digitalBoth sources through the component video have banding problems. Some techs have said that it could be an issue with the ground loop. Whether I use a 6' or 30' component cable, the issue still arises. I had an Infocus X1 projector and there were no...Mon, 13 Oct 2008 22:38:21 GMThttp://www.fixya.com/support/t562979-preylahong_nec_mt830_need_help_reset_newHello, Marrie if you can help me out am trying to put new lamp on my MT830+ NEC projector but I don't know how to reset lamp please help thank you.Mon, 13 Oct 2008 22:38:21 GMThttp://www.fixya.com/support/t580079-eiki_lc4300_projectorI just replace the exploded bulb and the "replacement bulb" warning lamp is still on; is there a reset? The new lamp does not appear to turn onMon, 13 Oct 2008 22:38:21 GMThttp://www.fixya.com/support/t747683-projectormy nec projector has 1800 hours left but it just started showing vertical ribbed lines, is there anything i can do. can you help. thanks pat sageMon, 13 Oct 2008 22:38:21 GMThttp://www.fixya.com/support/t860255-temp_fan_light_problemHi...? PLZ Help For sony projector vpl-sc50m ?Temp/fan light problem,? How to Stop light.....Mon, 13 Oct 2008 22:38:21 GMThttp://www.fixya.com/support/t921803-power_maybe_internal_fuseprojector won't power on. no lights light up, nothing. projector was running, then someone running a microwave tripped the breaker. flipped the breaker back on and the projector will not turn on. email from eiki said it was...Mon, 13 Oct 2008 22:38:21 GMThttp://www.fixya.com/support/t1052261-temp_faultwhen i turn the projector on the fan tries to start up but no light then after a while the power and the temp light comes on. I have tried another bulb but no difference is it possible the other bulb is faulty aswell or is it a different problem....Mon, 13 Oct 2008 22:38:21 GMThttp://www.fixya.com/support/t217475-connecting_sky_tv_projectorI am finding it hard to connect my sky tv to my projector, which cable do i need.Mon, 13 Oct 2008 22:38:21 GMThttp://www.fixya.com/support/t371861-eiki_lc_xnb4m_computer_connection_issueI just purchased this unit and cannot get it to recognize my computer. If I attach the 15 pin connector / DVI-I, it makes my compuer screen go black, and navigating into the menu on the projector shows no signal. When I attach a s-video cable or the...Mon, 13 Oct 2008 22:38:21 GMThttp://www.fixya.com/support/t102731-projection_problem_toshiba_tlp_261When the projector is turned on, it displays the default screen. In the lower left corner the display is red. Adjusting the color tint does not correct this. Is there an internal problem?Mon, 13 Oct 2008 22:38:21 GMThttp://www.fixya.com/support/t13967-redirect_output_pc_laptop_projectorHow do I redirect the output of my PC laptop to the projector?Mon, 13 Oct 2008 22:38:21 GMThttp://www.fixya.com/support/t709493-could_not_syncroniseMy Projector could not get the signal from the computer but continued saying Searching for a long time.Mon, 13 Oct 2008 22:38:21 GMThttp://www.fixya.com/support/t13972-projector_red_tint_fixmy projector has a red tint, how can i fix it?Mon, 13 Oct 2008 22:38:21 GMThttp://www.fixya.com/support/t470746-double_imagedouble image at screenMon, 13 Oct 2008 22:38:21 GMT