20 Most Recent Toshiba SD-43HTS System Questions & Answers


check your sound mode key on the remote and press repeatedly till you hope fully get it back.......also be sure the center (voice channel) spkr wire is connected properly.....hope this helps!

Toshiba SD-43HTS... | Answered on Jun 06, 2010


the DVD is blocked in PAL system, ¿ How I can the DVD in NTSC system ? the menu is blocked. thank

Toshiba SD-43HTS... | Answered on Apr 26, 2009


You will need to get a service manual and trouble shoot what amp. circuit is defective. if you have no solid state printed circuit board experience, you really should take this unit in to a repair shop and have it estimated. There is no quick fix for this unit. Good Luck.

Toshiba SD-43HTS... | Answered on Feb 05, 2008


Sorry not a solution but experienced the same problem. The problem started off the same as you described by now my player won't play DVDs at all. Seems that the laser is faulty and it is cost prohibitive to repair (it's sold as a complete module which would be around £100). I've been advised to replace it :-(

Toshiba SD-43HTS... | Answered on Mar 01, 2007


The manual is here
https://tvna.compal-toshiba.com/us/wp-content/uploads/sites/2/2016/09/toshiba-43_49_55_65l621u_16-0706_web_v2_en_final_lr.pdf

The connection for external speakers like you have is called analog audio output and it is shown with a little set of headphones next to it. The issue is the size of that jack. There are two basic sizes 3.5 mm and 2.5 mm . The manual does not say which one is on your television. If you have a set of headphones you can try that would let you know. Otherwise it is trial and error. What you need to do is get a cable that has that end on it and then make the connection to your speakers. Using the wires on the speakers you need to be able to tell what polarity they are and connect two of them to one of the wires in the cable that you found that fits the jack. These are the ground connection and on the cable the ground is usually a bare wire strand. Then the other two cables that are remaining, connect to each of the wires that are coming out of the connection to the television ( they should be colored) One goes to each for left and the other for right. You may want to solder them and make sure that you tape or insulate them against shorts.

Toshiba Audio... | Answered on Sep 08, 2018


suspect you have a broken wire ,we can not fix it here see someone that can physically test it and possibly solder wire

Toshiba Audio... | Answered on Aug 16, 2018

Not finding what you are looking for?
Toshiba SD-43HTS System Logo

9 questions posted

Ask a Question

Usually answered in minutes!

Top Toshiba Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5686 Answers

Ben Armstrong

Level 2 Expert

360 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

26846 Answers

Are you a Toshiba Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Toshiba Audio Players & Recorders

  • Toshiba Audio Players & Recorders

Most Popular Question

protection error when switching sd 43hk

  • Audio Players & Recorders
Loading...