20 Most Recent Alpine CDA-9851 CD Player - Page 4 Questions & Answers

you need to purchase (if you do not have it already) the KCA-420i Alpine Interface Adapter for iPod (item # 500KCA420i). and connect it to the aux input socket

I turned the clock ON while the radio was on, then when I turned the radio OFF, the clock continued to display. Nice.

you can get a set of phono leads with a jack on just one end?plug that in to the back of the head unit (depending on your pre out options and aux option) then plug it straight in to you ipod.
hope that helps?

found the manual on another website

Hi - You can download the manual from the link underlined in blue below:

CDA-9851



Scroll through & sett demo to off.


Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!

you have to switch your decks source to AUX and it should work fine. If not you may have a bum player with a bad input.

yeah same problem, with a pioneer unit and also a JVC unit.
I think the problem lies in the 6 disk cd changer setup, something is little wonky there, just cant figuare out what, hopeing somone who resolved it could give us a hand

Go into settings in from the menu button. using the fowrad and backward keys find the clock setting. The hours should be blinking on the clock. change using the scroll and press the scroll to change to minures. just press menu to return to the menu then go to return. Problem solved.

you go to a stereo shop..(walmart autozone etc should also do) buy a mounting kit and a wire harness adapter. The wire colors on the adapter match the wire colors of most aftermarket decks. MAtch the wire colors and connect...make sure to tape wires well as if they touch you rick damage to your deck.. install the mount kit plug in your cd player and slide it in and you are good to go..

If someone tried to steal it maybe they Jolted some of the wires behind the harness or the connection into the harness and when you are driving it loses its connectivity. Check all of the connections in the harness and make sure noone of them feel loose. Just as a test try putting it in another car(if applicable) or bench test it, I.e leave it hooked up directly to the battery for a while playing a cd with a small speaker hooked up to a channel( make sure wires dont cross...!!!!!!) and see if you can replicate the issue. Just some thoughts.

1. Mechanical Issue: There might be a mechanical problem with the disc drive or the eject mechanism. It's possible that a part is jammed or not functioning correctly.
2. Dirty or Damaged Disc: If the disc is dirty, scratched, or damaged, the player may have difficulty reading it and thus not ejecting it properly.
3. System Error: There could be an internal error within the player's software or firmware causing it to not recognize the disc properly or to malfunction when attempting to eject it.
4. Power Issue: Sometimes, power-related issues can affect the functionality of electronic devices. Ensure that the player is receiving adequate power and there are no loose connections.

Here are some troubleshooting steps you can try:

• Turn off the player and then turn it back on to see if it resolves the issue.
• Try ejecting the disc using the manual eject button (if available). This button is usually a small pinhole near the disc slot. You can insert a paperclip or a similarly sized object into the hole to manually eject the disc.
• If possible, try using a different disc to see if the problem persists. If other discs work fine, then the issue may be with the original disc.
• Check for any visible obstructions around the disc slot and remove them if present.
• If none of the above steps work, you may need to contact Alpine customer support for further assistance or consider taking the player to a qualified technician for repair.

Se o Bluetooth do seu Alpine CDE-W235BT parou de funcionar ap?s uma falha durante a atualiza??o, pode haver algumas etapas que voc? pode tentar para resolver o problema: 1. **Reinicie o Aparelho:** - Desligue o r?dio por alguns minutos e ligue-o novamente. Isso pode reiniciar o sistema e resolver problemas temporariamente. 2. **Restaurar as configura??es de f?brica:** - Consulte o manual do usu?rio para descobrir como realizar uma restaura??o das configura??es de f?brica em seu Alpine CDE-W235BT. Isso pode resolver problemas causados por configura??es incorretas. 3. **Verifique a vers?o do firmware:** - Se poss?vel, verifique a vers?o do firmware do seu Alpine CDE-W235BT. Se houver uma vers?o mais recente dispon?vel, considere atualizar novamente o firmware, seguindo rigorosamente as instru??es do fabricante. 4. **Remova Dispositivos Pareados:** - No menu Bluetooth do r?dio, remova todos os dispositivos pareados anteriormente e, em seguida, tente parar novamente. ?s vezes, problemas de conectividade podem ser resolvidos removendo e pareando novamente os dispositivos. 5. **Atualiza??es de Software:** - Verifique se h? atualiza??es de software dispon?veis para o seu Alpine CDE-W235BT no site do fabricante. Caso existam, siga atentamente as instru??es para realizar a atualiza??o. 6. **Contate o Suporte T?cnico:** - Se as solu??es acima n?o resolverem o problema, entre em contato com o suporte t?cnico da Alpine. Eles podem fornecer assist?ncia espec?fica para o seu modelo e orienta??es adicionais para resolver o problema. Lembre-se de que mexer no firmware e nas configura??es do dispositivo envolve riscos, e ? sempre recomend?vel seguir as instru??es fornecidas pelo fabricante para evitar danos permanentes ao aparelho. Se voc? n?o se sente confort?vel fazendo isso por conta pr?pria, procurar ajuda profissional pode ser uma op??o.

Question edited for clarity. https://www.google.com/search?q=alpine+vie-x077+wiring+diagram https://www.google.com/search?q=alpine+vie-x077+installation+manual ..

After researching, it appears that there is no direct evidence suggesting that the Alpine TDM 7543 stereo unit has the ability to switch from green to red lighting. This is an older unit and specific information can be challenging to find. Your best option to get a definitive answer may be to directly contact Alpine's customer service or refer to the original instruction manual.

Help here https://www.google.com/search?q=hange+the+language+of+my+alpine+car+stereo+(700w)+to+English ..

I found wiring diagram at 2000 Dodge Ram 1500 Stereo Wiring Diagram ' Dodge durango, Dodge dakota, Dodge ram 1500 (pinterest.com) and wiring color codes at 2000 Dodge Ram Pickup Car Stereo Wire Colors and Locations (the12volt.com) but I recommend to consult an auto electrician for authentic connections.

ck here.. http://forums.pelicanparts.com/porsche-911-technical-forum/116178-alpine-tdm7543-head-unit-removal.html

mr david,i recommend inspecting the subwoofer's voice coils visually for any signs of damage, such as tears or burns, and r double-checking your wiring connections

the number is in your car manual on a card usally about 4 digits

There is an Owner's Manual for $80 on eBay. Also Service Manuals. They were fitted to Porsche. https://www.google.com/search?q=alpine+7164+manual ..