20 Most Recent Apex Digital PF2020 20" TV - Page 2 Questions & Answers

Buy an exact remote at website 1-800-Remotes Factory original.Spend some money like about $50 make ur life and funsction easier to use.

try accessing your tv settings menu and look for audio settings. usually there is an adjustment that you can make for external audio speakers such as when hooking up to a sound amplifier or internal audio that accesses your internal tv speakers.

Keep pressing one for one for at least 10sec, if not works try to press two button simultaneously at least for 5sec.

Try loading a original DVD,if not OK them the laserunit is faulty or dirty.

i found out in my in dept probing around the line output transformer has gone so no tv it is to get recycled

Press the (function or F) button and the mute button at the same time. This will unlock the screen and allow you to view the channel as desired. • If your TV asks for a 4-digit code or password please enter 3308 or 6688 to unlock the screen or reset any preset rating levels..

Please rate this Fixya solution

Press the (function or F) button and the mute button at the same time. This will unlock the screen and allow you to view the channel as desired. • If your TV asks for a 4-digit code or password please enter 3308 or 6688 to unlock the screen or reset any preset rating levels

Your screen somehow got switched to theatre/cinema mode. There is a setting on the remote that attributes to aspect ratio. Sometimes it is called "ASPECT". Look for it, and press it until your original screen aspect shows.

punjabie if you have a receiver box for direct tv try unplugging the box then plugging it back in after about 10 sec that should fix the issue, if not then i would call direct tv may be something with their box

you need the origanal remote if you don't have it you can get it at www.vancebaldwin.com the part nuber is 8201800271L

press and fold the F key then press mute via the remote is the only way stated in the manual. try the remote you have make sure there is fresh batteries in it and the switch on the side is set to TV

Without a remote controller, you may have limited options to change modes on your Apex digital TV. However, you may be able to change the mode by using the buttons on the TV itself. Here are some general steps you can try:

1. Turn on your TV and make sure your DVD player is connected to it.
2. Look for the "Menu" button on the TV and press it.
3. Navigate through the menu options using the arrow buttons on the TV until you find "Input" or "Source."
4. Press the "Enter" button to select the input/source option.
5. Use the arrow buttons to select the input/source that corresponds to your DVD player.
6. Press the "Enter" button to confirm the selection.
7. Press the "Menu" button to exit the menu.

Note that the specific steps may vary depending on the model of your Apex TV. You may also consult the user manual for your TV for more information on changing modes without a remote controller.

Does it have a reset button... somewhere? Try that, reset it!

Different model service manual may have similar information. https://www.manualslib.com/manual/1137846/Apex-Digital-Pf2720.html?page=2#manual