20 Most Recent Curtis SMP228 MP3 Player - Page 4 Questions & Answers

http://www.curtcoint.com/item.asp?itemnmbr=DVD5088

I don't know what kind of bluray player you have but I would find it hard to beleive it does not have a digital optical output, maybe even HDMI. Anyway, I'm going to try to look up you HTIB1002, I'm assuming it's a receiver, But you may need an A/V. What in/out puts does the bluray player have? JUST red, white and yellow or are there others?

clean it with a cd cleaner a few times

If you name the model(s) involved you might find assistance in locating the User Guides. I usually find them for free at retrevo.com.

does your MP3 player function properly? you can't update your firmware through the internet..copy this link http://www.curtisint.com/support/troubleShooting.asp ......go to support, you might see the drivers for your players.goodluck.cheers!!

Try to restart it. there is a reset button, its like a hole. use paper-clip or any pointed object to press it. Also try pressing it while its connected to your computer.

Maybe the lens just needs cleaning: Radio Shack has a laser lens cleaner for DVD?s (Item# 42-227 $14). It is an ?Audio CD?, so read the instructions carefully and have your speakers / headphones on to listen to what is on the audio CD. It is a CD with a single row of tiny brushes. No chemicals involved. Get it... it may fix the issue.

If the display is working, you have audio. Check your amplifier. 1300Watt adaptor ... This unit draws a very low power and that is not needed.

1. Power Off: Turn off the device.
2. Jumper Configuration: Locate the jumper labeled "S16" on the device. Initially, it should be connected to pins 2 and 3.
3. Power On (Alarm+All LEDs Flashing): Turn the device back on. You'll see the alarm LED and all other LEDs flashing.
4. Power Off Again: Turn off the device once more.
5. Jumper Adjustment: Change the jumper configuration from pins 2 and 3 to pins 1 and 2.
6. Finished: Your Porpo YH-2000 is now set to the desired angular unit mode.

If you encounter any issues, you can press the reset switch on the back of the device to reinitialize it.

this model SA rather than SC seems to be a Middle East model. The SC version doesn't have DAB. https://www.google.com/search?q=panasonic+sa-pm250+instruction+manual ..