20 Most Recent GoVideo Go Video DVD/VCR Combo - Page 5 Questions & Answers


Downloaded DVD's can often be encoded using different software and some work better than others.

If they only play to the exact same point they were probably built from a pair of files eg cd1 and cd2 and then encoded into one.

Computers can handle these issues much better than any dvd player due to the availability of CODECS and more tolerant software. They will often play DVD's that dvd players cannot even touch

I would suggest that you run them through another program and re-burn them. Nero does a great job and will even add chapters if they are not currently set

Try stick to the exact same source for your DVD files.

GoVideo Go Video... | Answered on Mar 30, 2011


Bad recording VHS or old VHS tapes,will sometimes causes this problems,because of degrading magnatic tapes.Sorry this problems,u did the fixed adjusting manual tracking,that it not fixing the problems,sorry that all u will getting that kind of quality of picture.

GoVideo Go Video... | Answered on Mar 23, 2011


It is sure that the processor is giving the commands and outputs the drive voltage to the loading motor to work and open the tray or load the cd.
This means that the motor is faulty, the motor drive output IC is defective, the circuit leading to the drive IC must be checked for the loading voltage from the processor to confirm.
Finally the possibility of the motor being jammed, the mechanism or the gear movements are restricted by foreign particles or that there is misalignment of the linkages of the loading mechanism.
This means there is voltage on the motor without the mechanism moving which will require an overhauling of the drive mechanism.
Remove the section, check voltage and reset.

GoVideo Go Video... | Answered on Mar 10, 2011


It all depends on the region coding of your player and the code on each disc.

For example, if the DVD region code is 1, and the player is region 4, the disc will not be compatible. The same can be said of region 4 discs in a player specifically intended as a region 1.

Region-free discs (or '0') should work with this player. It sounds like a restriction from region coding between the discs and the player. There isn't much you can do except use discs marked 'region 0' or 'ALL' (playable worldwide), or those which match the code on your player. Check your disc's cover for region code information (if any).

I do not recommend region hacks as these may damage your player.

I haven't heard of Alligator Dundee, but after some reading up on it, it appears to be a parody of Crocodile Dundee, which was more popular.

GoVideo Go Video... | Answered on Mar 08, 2011


There a few things that can cause this, bad loading sensor, the idler assembly is defective, or a broken drive belt, to find the actual cause you will need a tech to see if it can be remedied at a reasonable price.

GoVideo Go Video... | Answered on Feb 28, 2011


Hello there,

This is most likely because the recorder is connected to a cable box. When setting the timer recording feature with a cable box as the source, you are not actually selecting the channel to record. You are selecting the recording source. The cable box sends all of the channels to the recorder using RF channel 3. In this case, the channel for recording will be whichever channel is selected on the cable box.

To help me give you a more definite answer, please can you answer the following quick questions:

1. Are you using a cable box?
2. If using a cable box, how is it connected to the recorder?
3. What is the model number of the GoVideo recorder, e.g. DVR4000?

Thanks,
BElectric

GoVideo Go Video... | Answered on Feb 23, 2011


Did the tape remain inside the VCR after the power-off? if so, it is probably one of many causes including:

the power supply may have several short-circuit/leaky components within it, especially electrolytic capacitors and IC regulators;

if the VCR operates mechanically with more than 1 belt, chances are the belt(s) will need replacement (but not likely if the model is relatively recent, i.e. less than 5 years old).

Presuming the unit is idle, no tapes or discs in it, and it reverts to standby/clock by itself, without any action from you, then it would be poor regulation from the PSU.

Being a budget-model, the PSU should be pretty straightforward and not too expensive to fix.

GoVideo Go Video... | Answered on Feb 22, 2011


Buy a 'universal' remote - available from most electrical / tv stores

GoVideo Go Video... | Answered on Feb 18, 2011


Hi there,

The Zenith player/recorder will be able to record to DVD from an external input such as a PVR. The most likely reasons you are unable to record successfully are:

1. The TV / DVR is not connected to the Zenith recorder correctly. You need a separate cable for recording. You cannot record using the cable that is connected for playback of DVD discs.
2. The TV / DVR does not have "VIDEO OUT" sockets
3. You have not selected the correct external input on the Zenith recorder

If you can let me know the brand and model number of your TV / DVR and how it is connected to the Zenith DVD recorder, I can let you know why it isn't working, how to make it work, and even draw you a setup diagram, if required. It's very difficult to give you the correct answer without these details.

You Zenith DVD recorder will record from the DVR - the real question is, can the DVR send video to the Zenith DVD recorder . . . ?

Regards,
BElectric

GoVideo Go Video... | Answered on Feb 17, 2011


Hi,
Click HERE to download required user manual free copy of DV2130 dvd combo, please check setup menu to change aspect ratio of picture to get normal picture.
Thanks.

GoVideo Go Video... | Answered on Jan 26, 2011


you should be able to change it through the settings or even on the movie you are trying to view.

GoVideo Go Video... | Answered on Jan 24, 2011


If you have blue screen or snow on the tv, it means the video head is dirty. Use a wet or dry cleaning tape, I recommend the dry because it is easier on the mechanism. The other option is to buy a store bought blank tape T120 and set the vcr to sp and let it run the full two hours.

GoVideo Go Video... | Answered on Jan 22, 2011


before the feature begins... the menu shows up right play / set up or jump to ... go to set up make sure the language for this is correct....using the remote for the TV press cc (this should go in a loop cc1, cc2 off)... press play and enjoy the movie

GoVideo Go Video... | Answered on Dec 30, 2010


Go Video manufactures there on unit. The vcr and dvd decks in the unit are made by others. You can contact GO Video. They have a web site.

GoVideo Go Video... | Answered on Dec 26, 2010


Hi dottie,
Welcome to FixYa.
My name is John, I will be assisting you with your issue.
You can pick one up at the Dollar Store or at Wal-Mart.
Thanks for choosing FixYa.
Happy Holidays........John

GoVideo Go Video... | Answered on Dec 26, 2010


open the remote control and cleaned with a peace of cotton and alcohol , clean the bar code and the plastic s/w this would fix ur problem

GoVideo Go Video... | Answered on Dec 15, 2010


I push the VHS Cartridge in, it drops down to the play position, the front door opens, the tape comes out, it goes around the chrome wheel that is spinning, but it will not play, will not rewind, will not fast forward. It then shows "Error" and the machine shuts off, with the tape still around the chrome wheel, When I turn the machine back on, the VHS Cartridge ejects from the machine. This machine has been used very little, I loaned it to my Son In Law and it came back with the VHS Tape Deck not playing. I have the machine open, so I can see what it is doing.

GoVideo Go Video... | Answered on Dec 14, 2010


Go video is made by LG. On the DVD/VCR combothere is a RES button which can change from 480P to 480i.. I like the 480P better. P is progressive scan. Has no problems with crt TV.

GoVideo Go Video... | Answered on Dec 10, 2010


Go video is made by LG. You have to replace the VCR in the combo.

GoVideo Go Video... | Answered on Nov 25, 2010

Not finding what you are looking for?
GoVideo Go Video DVD/VCR Combo Logo

444 questions posted

Ask a Question

Usually answered in minutes!

Top GoVideo Televison & Video Experts

Marvin
Marvin

Level 3 Expert

84966 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

512 Answers

 Grubhead
Grubhead

Level 3 Expert

5686 Answers

Are you a GoVideo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

GoVideo Televison & Video

  • GoVideo Televison & Video

Most Popular Question

service center near elk grovr sacramento

  • Televison & Video
Loading...