My Hitachi projection tv has an issue with the screen. The picture is flickering all the time. It is...
(More)
My Hitachi projection tv has an issue with the screen. The picture is flickering all the time. It is constantly jumping and skewing. Any fixes?
My Hitachi 43gx10b rear projection tv has rolling horizontal lines and recently starting...
(More)
My Hitachi 43gx10b rear projection tv has rolling horizontal lines and recently starting periodically shrinking the screen size to what looks like a distorted fish eye lens view. It will stay this way for a few minutes then return to normal. But it is getting worse.
went to the digital Aray and was able to move the red over the green but i wasn't able to move the...
(More)
went to the digital Aray and was able to move the red over the green but i wasn't able to move the blue in to place. i was able to move the blue up and down but not left or right
my hitachi 43gx10b i did the digital array the ble line up with no problem but it is the red that...
(More)
my hitachi 43gx10b i did the digital array the ble line up with no problem but it is the red that wont move any suggestions and how much would this cost o fix in a repair shop or is it cheaper to fix it myself?????? help me
i have a Hitachi 43GX10B 43 in. Rear Projection TV and we have sound, but no picture. video2 is used...
(More)
i have a Hitachi 43GX10B 43 in. Rear Projection TV and we have sound, but no picture. video2 is used for the Dish TV antenna and video1 is for dvd. we have sound, but no picture. i can go to local antenna and get a snowy screen and can see the menu and manipulate around the menu. switch back to video2 and still no picture. any ideas?
Hi all! I have the Hitachi 43GX108b. Chassis: HP 12 It has the stk392-110's which I have a;ready...
(More)
Hi all! I have the Hitachi 43GX108b. Chassis: HP 12 It has the stk392-110's which I have a;ready ordered 160's from a parts source. It also has one burnt Resistor at location RK 46 I'm at a stall in research here... What I could find on the web so far is that Location RK 46 is on the convergence board, It is a 1.5 ohm Resistor 1 Watt Axial Lead Fusible PROBLEM: When I search parts stores on the web they ask for a "TOLERANCE" value. I can't see having to pay 25.00 for a Service Manual: just for the product number for one resistor. Can anyone please post what exactly I am supposed to ask the parts people for so I can watch my tv again? I have seen full kits out there but the websites for those posts are somewhat outdated and still reffer to the older stk's being part of the kit and older stk's have overheating issues. TIA Gang!
Here are some of the most common symptoms and examples of a convergence problem. This is a very common failure on Projection TV sets. Screen looks 3D...
written by Ecollier2012
Try first leaving the TV power cord unplugged for some times, let say one hour or so. Also
ensure that the fault is not coming from a faulty receiver...
written by ginko
FL231. FUSE.... The RCA ITC22 chasis has a common problem. and it not all that difficult to repair. Does your rca projection tv have read blue and...
written by willtab
Here are some of the most common symptoms and example pictures for projection TV convergence problems. This is a very common failure on Projection TV...
written by Ecollier2012
Here are some of the most common symptoms and example photos of a convergence problem. This is a very common failure on Projection TV sets. Screen...
written by Ecollier2012
Your TV may have a convergence problem. Here are some of the most common symptoms. Screen looks 3D One or more colors can't be adjusted when using the...
written by Ecollier2012
You can help other;s and maybe they will help you. This can be done by
uploading a copy of you user manual and any service information for...
written by stoneheaded
Before you order new convergence chips to try to fix the double vision or 3D look on your tv check the solder points for the chips. If you are able...
written by misenhei
SERVICE/REPAIR OF TELEVISION AND ELECTRONIC EQU... Read More
SERVICE/REPAIR OF TELEVISION AND ELECTRONIC EQUIPMENT, TECHNICAL CONSULTATION, REPLACEMENT OF LAMPS IN LCD AND DLP PROJECTION TELEVISIONS.
QUALITY SERVICE AND REASONABLE PRICES.