20 Most Recent Hitachi 43FDX01B TV Questions & Answers


Hitachi Projection TV Repair Kit for one or more of the following symptoms

This might not be your model but you should contact them to see if the have the parts I know they list the manual

Hitachi 43FDX01B... | Answered on Feb 26, 2018


If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Unlock procedure to many popular brand TVs are given.

Hitachi 43FDX01B... | Answered on Aug 11, 2014


check your color setting by going display if problem not there then you need to change your display tune which built in your tv internal side its a small machine like a box. just change it it will work fine.below 1 link add if want then you can help by donate and you can spread it with your friends circle for help me Please Help Me To Get Out Of Debt wish you will help

Hitachi 43FDX01B... | Answered on Jul 13, 2014


Download it from - http://crackstorage.com/get_uploaded_file.php

Hitachi 43FDX01B... | Answered on Jun 08, 2014


internal error may be light wire got lose connection

Hitachi 43FDX01B... | Answered on May 30, 2014


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. Viewing it in "Mosaic" or "Magazine" will make surf easy.
http://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience. Do a search by type in the brand name of the device to the search box.

Hitachi 43FDX01B... | Answered on May 30, 2014


It is too much to type in here, about how to enter, adjust and exit service mode. If you wish to get more details, check this link. http://electronicshelponline.blogspot.com/ Selecting the view option, either to Mosaic / Time slide, can be selected by the drop-down list, at the top left of the display window, will make surf easy. You can also do a search, by type in the brand name/model number/IC used, in the search box at the top right of the display window.

Hitachi 43FDX01B... | Answered on Oct 25, 2013


Its main digital board should be checked. Contact any service technician.

Hitachi 43FDX01B... | Answered on Jul 02, 2013


To reset to factory settings, you have to enter its service mode option. If you wish to know, how to enter and exit service mode, and make adjustment with it, check this link. It has detail about this. http://electronicshelponline.blogspot.com/ Pull up older posts there, either by its left side bar, or see it in Timslide option.

Hitachi 43FDX01B... | Answered on Jun 25, 2013


first, I would not buy a "kit"; prices on these range from 40 to 80 dollars and most of the parts are not going to be needed.

See attached photo of convergence board in a set like yours.

You can look at the two chips in your set: either they are STK-392-110 OR -150--BOTH ARE THE SAME BUT THE 150 LASTS LONGER.

A FEW VERSIONS WILL USE STK-392-120---IT IS NOT INTERCHANGEABLE WITH THE 110 OR 150 CHIP.

In either case you can buy on EBAY (A seller I use) a pair of the chips for about 12 dollars.

About the only other thing that goes bad is there may be damaged resistors around one of the chips--usually just one but they are easy to spot and or test (see photos)

No matter how you add it up you can buy the parts you need for under 25 dollars including shipping.

If the photos and information I have provided helped you, rate this solution as very helpful as I do this here for free.

SD TECH



5ceae73.jpg




5c0c154.jpg


18d3af9.jpg



614249d.jpg

Hitachi 43FDX01B... | Answered on Nov 26, 2012


Google this----the burnt one will look bigger----most are actually 1/2 watt and none that burn are over 1 watt. If 46 one of the two chips for convergence got it.

Hitachi 43FDX01B... | Answered on Nov 04, 2012


Send your email address to me by Fixya, and get back a manual which describes all detail by return mail. Check this link too. Sometimes it might help you.

Hitachi 43FDX01B... | Answered on Oct 02, 2012

Not finding what you are looking for?
Hitachi 43FDX01B TV Logo

288 questions posted

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2337 Answers

The Knight
The Knight

Level 3 Expert

76046 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Hitachi Televison & Video

  • Hitachi Televison & Video

Most Popular Question

tv went out after lightning storm all

  • Televison & Video
Loading...