Hello, I have a problem with my c3200! looks like yellow, and color looks faded. The image I'm...
(More)
Hello, I have a problem with my c3200! looks like yellow, and color looks faded. The image I'm trying to print looks all faded. Any help would be great thank you for your time
Two weeks ago I saw on Fixya service that my error code E000020-02b0 was a Magenta drum. I replace...
(More)
Two weeks ago I saw on Fixya service that my error code E000020-02b0 was a Magenta drum. I replace it this week and ran the printer about 400 copies then the unit stopped and a new code (almost the same) appeared, E00002002d0. I was instructed to turn off the unit then turn back on. I did this. Now the unit just runs constant saying the "printer is warming up" 1/2 the first time then I tried to finish the print run I was on. The unit acted like it was in "Slow Motion" the green lights stayed solid for a long time , then flashed for a long time and when I thought it was going to print the unit had to warm up again. I turned off and on several times for two days - no change. I saw today that my new error code says I needed a new drum according to some Guru, but the error code last week said that and it ran fine for 400 prints. The error coes were the same except the first had "B" as in "Boy" and the second had "D" as in "Dog"
Hi there,
As a graphic designer I'm looking for the best possible/high quality printing using...
(More)
Hi there,
As a graphic designer I'm looking for the best possible/high quality printing using the ImageRunner C3200 with the ImagePass-C1 (recently installed).
Understand the C1 increases the printing quality, but I'm afraid I'm not using the right settings as some colors don't match what I have set on any graphic manager or word processing softwares I use... specially with the BLUE color, the print out looks like green...
Anyone can help me with it??
Thanks in advance
canon pc-p70 microfiche printer: The machine just quit printing yesterday and it keep flashing an...
(More)
canon pc-p70 microfiche printer: The machine just quit printing yesterday and it keep flashing an "EO" codes when the power is on.I would appreciate any solution to help solve this problem, thank you.
Hello, I am having a problem with Fiery z5000 it has lost its configuration as e'não enter...
(More)
Hello, I am having a problem with Fiery z5000 it has lost its configuration as e'não enter the setup, only to boot and the message is ready to receive the operacional.Como system can solve this problem since I have this sistema.Tem like me send via email?
problem with print out paper the color for it doesnt compatible with the original paper so i want...
(More)
problem with print out paper the color for it doesnt compatible with the original paper so i want the solution ASAP