JVC AV-27530 27" TV - Answered Questions & Fixed issues

maybe your tv is set to PAL mode set it to NTSC, or else your tv is out of sync.check the jungle.

JVC AV-27530 27"... | Answered on Feb 25, 2015 | 100 views

many of the late model tvs with a crt (picture tube) would go to a blue screen when there is not signal from the cable or antenna so you don't get the irritating white noise and black and white dots running all over the screen, (called the raster), so probably you aren't getting a signal to the tuner. check your connection from the cable/antenna.

JVC AV-27530 27"... | Answered on Sep 26, 2014 | 93 views

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Pull up older posts.

JVC AV-27530 27"... | Answered on Aug 15, 2014 | 62 views

Check and replace damaged component/s at its main power supply regulator [SMPS] section circuit. If you wish to get more details, check the site linked here. Surf the site in "MOSAIC" view. It will make surf easy.

JVC AV-27530 27"... | Answered on Jan 23, 2014 | 16 views

If you wish to get more details, check the site linked here. http://electronicshelponline.blogspot.com/
Selecting the view option, either to Mosaic / Time slide, can be selected by the drop-down list, at the top left of the display window, will make surf easy. You can also do a search, by type in the brand name/model number/IC used, in the search box at the top right of the display window.

JVC AV-27530 27"... | Answered on Oct 10, 2013 | 23 views

We would be happy to help get that fixed right away. Thefirst thing we want to ensure is that all connected equipment is on.Wealso need to know what channel your TV2 is currently on, we will do this byturning the TV off then back on and noting the channel or input that appears onscreen when the TV is powered on, if the TV is not on channel 60 or 73, tune to60 or 73. Then Access "Modulator Setup"from TV1 by pressing"Menu", 6 for "System Setup", 1 for"Installation", then 5 for "Modulator Setup". Tune TV2 tothe channel that appears under "TV2 Out" on screen. If stillno picture and the mode for TV2 is "Cable", change it to"Air" and change the channel on your TV2 to 60, if it is already on"Air" then change it to "Cable" then change TV2 to channel73. If the issue is only on ONE receiver, unplug the DISH receiver for10 seconds and plug back in. The next thing we want to check is the connectionon the back of your receiver labeled "Home Distribution", this cablecarries the picture all the way to your TV2. Start by removing the connectionand screwing it back in, make sure all the connections going to your TV2 arehand tight. These steps should get your TV2 up and running.

We want to thank you for being a valued DISH Network customer!

Phillip Chang
DISH Network Customer Service Representative

JVC AV-27530 27"... | Answered on Jul 13, 2013 | 329 views

Heres the manual for your tv .. maybe this could help http://tv.manualsonline.com/manuals/mfg/jvc/av-27wr25_2.html

JVC AV-27530 27"... | Answered on Jan 29, 2013 | 535 views

To select the source you must have its remote control. There is no TV/AV source select button at the front panel of this TV.

JVC AV-27530 27"... | Answered on Jan 05, 2013 | 98 views

If its the set indicated here not too many easy possible reasons:

bad speaker in set

Speakers on rear of set are switched to external (slide switch may be there)

A bad headphone socket if there

last is a problem in the sound circuit which would cost more to fix than the set is worth,

JVC AV-27530 27"... | Answered on Dec 11, 2012 | 26 views

Only can be done if the set has connections on the rear for this--installing or adding speakers can damage the set instantly.

JVC AV-27530 27"... | Answered on Dec 06, 2012 | 22 views

JVC has a menu function called Auto Demo that displays the image with and without Dynamic Gamma. Find this feature in your menu liast and turn it off.

JVC AV-27530 27"... | Answered on Feb 11, 2016 | 1,890 views

On most , it is adjusted on the G2 control

marked "screen" on the Flyback Transformer

JVC AV-27530 27"... | Answered on Sep 10, 2012 | 89 views


this is the link to your television manuals it consists of troubleshooting regarding color screen problems.. hope this help you

JVC AV-27530 27"... | Answered on Sep 16, 2011 | 115 views

an internal degaussing coil circuit is already installed in the unit to neutralized color pattern...a loose solder connection may have caused this because as it operates temperature increases between the thermistor..

JVC AV-27530 27"... | Answered on Jul 16, 2011 | 124 views

Where you able to fix? We have similar problem.

JVC AV-27530 27"... | Answered on Apr 17, 2011 | 39 views

can't unlock channel

JVC AV-27530 27"... | Answered on Mar 31, 2011 | 50 views

In many many cases this is an indication of a failing picture tube. The gun assembly in the neck of the picture tube is shorting. There is a fix, but this is surely last resort and the final cure may not provide a fix. Picture tube rejuvenation is not always successful. I would certainly opt for a new TV. Thanks for asking, and show a few hands of support!

JVC AV-27530 27"... | Answered on Mar 13, 2011 | 126 views

adjust the horizonal or picture size or picture placement that should do it

JVC AV-27530 27"... | Answered on Mar 09, 2011 | 51 views

i fix it.

JVC AV-27530 27"... | Answered on Feb 21, 2011 | 24 views

Not finding what you are looking for?
JVC AV-27530 27" TV Logo

168 questions posted

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76016 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides