20 Most Recent JVC AV-27530 27" TV Questions & Answers


JVC has a menu function called Auto Demo that displays the image with and without Dynamic Gamma. Find this feature in your menu liast and turn it off.

JVC AV-27530 27"... | Answered on Feb 11, 2016


maybe your tv is set to PAL mode set it to NTSC, or else your tv is out of sync.check the jungle.

JVC AV-27530 27"... | Answered on Feb 25, 2015


many of the late model tvs with a crt (picture tube) would go to a blue screen when there is not signal from the cable or antenna so you don't get the irritating white noise and black and white dots running all over the screen, (called the raster), so probably you aren't getting a signal to the tuner. check your connection from the cable/antenna.

JVC AV-27530 27"... | Answered on Sep 26, 2014


Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Pull up older posts.
http://electrohelponline.blogspot.com/
http://remotesearch.blogspot.com/

JVC AV-27530 27"... | Answered on Aug 15, 2014


I have the AV-27S33 model and in the rear to the right of the inputs are two slits and inside these slits are two screws. The top screw is the focus,the bottom the brightness.Your tv is a different model but it may have this same adjustment,if it does try turning the bottom screw to the right to increase the brightness.

JVC AV-27530 27"... | Answered on Apr 05, 2014


Check and replace damaged component/s at its main power supply regulator [SMPS] section circuit. If you wish to get more details, check the site linked here. Surf the site in "MOSAIC" view. It will make surf easy.
http://electronicshelponline.blogspot.com/

JVC AV-27530 27"... | Answered on Jan 23, 2014


If you wish to get more details, check the site linked here. http://electronicshelponline.blogspot.com/
Selecting the view option, either to Mosaic / Time slide, can be selected by the drop-down list, at the top left of the display window, will make surf easy. You can also do a search, by type in the brand name/model number/IC used, in the search box at the top right of the display window.

JVC AV-27530 27"... | Answered on Oct 10, 2013


We would be happy to help get that fixed right away. Thefirst thing we want to ensure is that all connected equipment is on.Wealso need to know what channel your TV2 is currently on, we will do this byturning the TV off then back on and noting the channel or input that appears onscreen when the TV is powered on, if the TV is not on channel 60 or 73, tune to60 or 73. Then Access "Modulator Setup"from TV1 by pressing"Menu", 6 for "System Setup", 1 for"Installation", then 5 for "Modulator Setup". Tune TV2 tothe channel that appears under "TV2 Out" on screen. If stillno picture and the mode for TV2 is "Cable", change it to"Air" and change the channel on your TV2 to 60, if it is already on"Air" then change it to "Cable" then change TV2 to channel73. If the issue is only on ONE receiver, unplug the DISH receiver for10 seconds and plug back in. The next thing we want to check is the connectionon the back of your receiver labeled "Home Distribution", this cablecarries the picture all the way to your TV2. Start by removing the connectionand screwing it back in, make sure all the connections going to your TV2 arehand tight. These steps should get your TV2 up and running.

We want to thank you for being a valued DISH Network customer!


Phillip Chang
DISH Network Customer Service Representative

JVC AV-27530 27"... | Answered on Jul 13, 2013


To select the source you must have its remote control. There is no TV/AV source select button at the front panel of this TV.

JVC AV-27530 27"... | Answered on Jan 05, 2013


If its the set indicated here not too many easy possible reasons:

bad speaker in set

Speakers on rear of set are switched to external (slide switch may be there)

A bad headphone socket if there


last is a problem in the sound circuit which would cost more to fix than the set is worth,

JVC AV-27530 27"... | Answered on Dec 11, 2012


Only can be done if the set has connections on the rear for this--installing or adding speakers can damage the set instantly.

JVC AV-27530 27"... | Answered on Dec 06, 2012


On most , it is adjusted on the G2 control

marked "screen" on the Flyback Transformer

JVC AV-27530 27"... | Answered on Sep 10, 2012


caption box selection is on. disable caption

JVC AV-27530 27"... | Answered on Jan 14, 2012

Not finding what you are looking for?
JVC AV-27530 27" TV Logo

168 questions posted

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76016 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

JVC Televison & Video

  • JVC Televison & Video

Most Popular Question

keeps saying d s t dynamic gamma off

  • Televison & Video
Loading...