20 Most Recent Mpio FG200 MP3 Player Questions & Answers

Turn off the unit and connect it to the computer.
The computer should recognize the player.
Run a program called Mpio Utility (Can be found on the CD or Mpio.com)
Select format & Config
That should do the trick.

Or go to www.mympio.com

Just download the MTV Video Converter. Search it in google to get it.

This will do the trick http://www.mympio.com/index.php?topic=13.0

did you try to do a low level format?

You need to convert the video with Mpio converter
www.mpio.com in the download section

www.mpioamerica.com

www.mpioamerica.com in the accessories section

This should do it This will do the trick http://www.mympio.com/index.php?topic=13.0

Sorry, as far as i know you can't, you nead to reset: 1. Recharge the product by connecting to the pc (pc must be running). 2. Press the reset button using a sharp tool. Wait 10 minutes then connect the player and pc. (The reset button is between the FUNC and MODE buttons.) 3. Turn the player off and press the mode button while making the player and pc connection. 4. The message ¡°USB Connected¡± displays when turning the player on. 5. Disconnect the player and pc. 6. Connect the player and pc after turning off the player. The player is charged in about 2 hours if the player is off. 7. Upgrade to the latest firmware (Ver. 1.11 or higher).

ok what charge setting is it on? if its on the MTP setting hold the "MENU" down until a message apears that says "reconnect the mg100 to change the mode" then it should work. if not then i guess i wasnt verry helpful and im sorry

Either the device is bad, the pc port is bad, or the software is faulty. Try connecting to different usb port, then a usb port on a different pc with a compatible os. If still not recognized, then there is physical damage to player.

Try this: disconnect the player from the computer, turn it off, hold in the volume + button, and reconnect the player to the computer while holding the volume + button in. Keep holding the volume + button for an additional 5-50 seconds. Windows should eventually go into recovery mode and revive the player- it will pop up a window that says Found New Hardware Wizard.

If the display is working, you have audio. Check your amplifier. 1300Watt adaptor ... This unit draws a very low power and that is not needed.

1. Power Off: Turn off the device.
2. Jumper Configuration: Locate the jumper labeled "S16" on the device. Initially, it should be connected to pins 2 and 3.
3. Power On (Alarm+All LEDs Flashing): Turn the device back on. You'll see the alarm LED and all other LEDs flashing.
4. Power Off Again: Turn off the device once more.
5. Jumper Adjustment: Change the jumper configuration from pins 2 and 3 to pins 1 and 2.
6. Finished: Your Porpo YH-2000 is now set to the desired angular unit mode.

If you encounter any issues, you can press the reset switch on the back of the device to reinitialize it.

this model SA rather than SC seems to be a Middle East model. The SC version doesn't have DAB. https://www.google.com/search?q=panasonic+sa-pm250+instruction+manual ..

All questions need clear 'make model (what it is)' first 3 words. https://www.google.com/search?q=fmdott085+V398 ..