<?xml version="1.0" encoding="us-ascii"?><rss version="2.0"><channel><title>Epson PowerLite S3 Multimedia Projector Support</title><link>http://www.fixya.com/support/p177502-epson_powerlite_s3_multimedia_projector</link><description>Solved  technical support problems provided by FixYa users.</description><language>en-us</language><copyright>Copyright (c) 2007  FixYa, LTD.  All rights reserved.</copyright><webMaster>info@fixya.com</webMaster><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate><ttl>80</ttl><item><title>i push the power button, green led as it powers</title><link>http://www.fixya.com/support/t3467823-push_power_button_green_led_as_powers</link><description>i push the power button, green led as it powers on. the fan kicks on, immediate red led and the temp light flashes. after that no function, must be un plugged to even poweer off.</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item><item><title>image is projected inverted</title><link>http://www.fixya.com/support/t3170764-image_projected_inverted</link><description>image is projected inverted</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item><item><title>I have an Epson powerlite s4 and a yellowish patch</title><link>http://www.fixya.com/support/t2829442-epson_powerlite_s4_yellowish_patch</link><description>I have an Epson powerlite s4 and a yellowish patch appears on the screen as I turn on the projector</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item><item><title>No power</title><link>http://www.fixya.com/support/t2273700-no_power</link><description>I just put in new bulb and I have no power. I also didn't know that I wasn't suppose to take off cover when putting in new bulb. So when I took cover off there was a strip that slipped off could this be the reason it does not work?</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item><item><title>Lightware vp800</title><link>http://www.fixya.com/support/t196259-lightware_vp800</link><description>we turn on projector, fan works, light comes on, fan is on high working properly, it runs for 6 minutes, then only the light goes off and the fan stays on (in high position) and within 1-2 minutes the light comes back on and runs for another 5-6...</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item><item><title>panasonic projector lamp</title><link>http://www.fixya.com/support/t205691-panasonic_projector_lamp</link><description>hi how can i teli if the lamp is no good i have just got one of ebay i can not test it as i have still got 1100 hours on the one in the projector i have a panasonic pt-lc55e can you help thanks</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item><item><title>Projector</title><link>http://www.fixya.com/support/t253923-projector</link><description>Got a Saville NPX3000 projector. Powers up ok and tells me it's autosearching but won't display my computer. I got no manual with it so don't know if it's just me being daft.</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item><item><title>epson powerlite 7700p video problems</title><link>http://www.fixya.com/support/t405555-epson_powerlite_7700p_video_problems</link><description>projector is displaying a purple hue with a Toshiba laptop connected. Display on laptop is normal...Would the bulb be going bad?</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item><item><title>acer pd 112 projector</title><link>http://www.fixya.com/support/t447951-acer_pd_112_projector</link><description>i have acer pd 112 projector but off late its developed a problem, it gets shut off in 2 to 3 minutes of operation. and the lamp indicator turns orange / red but intially when its lit up it appears to really bright . has the life of come to an end or...</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item><item><title>panasonic pt-lb50ntea password problem</title><link>http://www.fixya.com/support/t469015-panasonic_pt_lb50ntea_password_problem</link><description>how do i reset my password if i cannot rember it and where can i find a free manual for it</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item><item><title>Color Problem</title><link>http://www.fixya.com/support/t461571-color_problem</link><description>I purchased a used Ask Protima m2+ projector and everything works fine except the color red which appears very dark, close to black. ?I am using an older ibm thinkpad laptop with Windows 98. ?I have reset the projector to factory settings and...</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item><item><title>Rewinding internal spring on retractable projector screen</title><link>http://www.fixya.com/support/t521211-rewinding_internal_spring_retractable</link><description>I have a Da-lite tripod screen that was having problems retracting so I decided to pop off one of the end caps to see what was going on. BAD IDEA! When I pulled the cap off, I could hear the internal spring mechanism spin the axle as it was release...</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item><item><title>display problem</title><link>http://www.fixya.com/support/t526695-display_problem</link><description>my projector model infocus IN72 the problem is they can display but also white output only and the menu settings did not display on the screen ..what they are the soulution is that problem?</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item><item><title>LCD projector has a 'shadow' in the green color</title><link>http://www.fixya.com/support/t527251-lcd_projector_shadow_in_green_color</link><description>Hi, I have a PC connected to my EPSON LCD projector. Everything displayed has a kind of a shadow: the mouse cursor for instance is seen twice. Using a monitor tester program, displaying horizontal and vertcal lines, it looks like the Red and Blue are...</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item><item><title>Preylahong NEC MT830+need help to reset new lamp</title><link>http://www.fixya.com/support/t562979-preylahong_nec_mt830_need_help_reset_new</link><description>Hello, Marrie if you can help me out am trying to put new lamp on my MT830+ NEC projector but I don't know how to reset lamp please help thank you.</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item><item><title>eiki lc4300 projector</title><link>http://www.fixya.com/support/t580079-eiki_lc4300_projector</link><description>I just replace the exploded bulb and the "replacement bulb" warning lamp is still on; is there a reset? The new lamp does not appear to turn on</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item><item><title>Please tell me how to reset lamp timer on Hitachi CP-x960?</title><link>http://www.fixya.com/support/t599695-please_tell_me_reset_lamp_timer_hitachi</link><description>Please tell me how to reset lamp timer on Hitachi CP-x960?</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item><item><title>Cost for replacement of control card for Toshiba TDP S41 projector</title><link>http://www.fixya.com/support/t643039-cost_replacement_control_card_toshiba</link><description>Our orgnisation has a ToshibaTDP S41 lcd projector which is not functioning now. One firm inspected the projector and reported that its control card should be replaced. I would like to know the approxiamte cost for this.</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item><item><title>Sky + to a Hitachi CP-X340 Projector</title><link>http://www.fixya.com/support/t631515-sky_hitachi_cp_x340_projector</link><description>Which connectors do i need for Sky + to a Hitachi CP-X340 Projector , any advice would be fantastic</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item><item><title>Video adjustment on LCD projector</title><link>http://www.fixya.com/support/t700731-video_adjustment_lcd_projector</link><description>I have an Epson ELP-5500 LCD projector that has a convergence problem. Are these projectors capable of any kind of adjustment for convergence issues? I have a broad electronics background, but don't really want to tear the projector apart if there's...</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item><item><title>reset</title><link>http://www.fixya.com/support/t702303-reset</link><description>how do you reset the projector hours not the lamp or filter</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item><item><title>projector</title><link>http://www.fixya.com/support/t747683-projector</link><description>my nec projector has 1800 hours left but it just started showing vertical ribbed lines, is there anything i can do. can you help. thanks pat sage</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item><item><title>NEC LT240K remote stops working while in use</title><link>http://www.fixya.com/support/t846799-nec_lt240k_remote_stops_working_while_in</link><description>I have a ceiling mounted NEC LT240K that is connected to a 20' VGA cable and a dvd player via RCA cable.  I have recently had an issue with the IR remote losing functionality while the projector is in use.  The most recent event consisted of powering...</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item><item><title>Temp/fan light problem,</title><link>http://www.fixya.com/support/t860255-temp_fan_light_problem</link><description>Hi...?    PLZ Help For sony projector vpl-sc50m 

?Temp/fan light problem,?
 
How to Stop light.....</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item><item><title>sanyo plc-xp46 lcd projector</title><link>http://www.fixya.com/support/t877595-sanyo_plc_xp46_lcd_projector</link><description>How to reset lamp replace indicator after replace bulb</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item><item><title>power (maybe internal fuse)</title><link>http://www.fixya.com/support/t921803-power_maybe_internal_fuse</link><description>projector won't power on. no 
      lights light up, nothing. projector was running, then someone running a 
      microwave tripped the breaker. flipped the breaker back on and the 
      projector will not turn on. email from eiki said it was...</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item><item><title>unable to connect sanyo projector to sony laptop</title><link>http://www.fixya.com/support/t923155-unable_connect_sanyo_projector_sony</link><description>unable to connect sanyo projector to sony laptop error is no signal Thanks in advance shaik</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item><item><title>Boxlight cp-310t won't display image</title><link>http://www.fixya.com/support/t935495-boxlight_cp_310t_display_image</link><description>I dropped my projector accidentally a few weeks ago, but everything has been fine until today. The projector turns on and projects, but it doesn't display anything - not even the menu when I press the menu button. I just got a new lamp, and I'm not...</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item><item><title>Projector won't stay on</title><link>http://www.fixya.com/support/t946919-projector_stay</link><description>I have a Sharp XG H400U LCD Projector. In a nutshell it won't stay on. I power it up and it shuts down. While on (however brief) the lamp light is green. I've cleaned the filter. Won't the lamp light be red if I need a lamp? I don't have a manual....</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item><item><title>Dell 4100mp projector</title><link>http://www.fixya.com/support/t995739-dell_4100mp_projector</link><description>My projector is about 3-years old. The other day there was a loud "pop" and the projector went dark. Small pieces of miror rained down (ceiling mount). The bulb is new and looks intact. Could this be the color wheel or chip? How can I get this...</description><pubDate>Thu, 24 Dec 2009 22:44:25 GMT</pubDate></item></channel></rss>