P A G E 9Hook Up Your Cable (CATV) and VCRLeave your VCR and your televisiontuned to channel three and usethe cable box to change channels.Remember, when screwing in RFcables onto jacks, clockwise tight-ens, and counterclockwise loosens. Without A/V cables, most VCRs willnot play videocassettes in stereosound.Cable TVwall jackCable TVwall jackRF coaxial cable (75ohm)RF coaxial cable (75ohm)Cable boxInOutTV back panel(expanded view)AntennaCableTV backInOutAudioVideo3 4VCR backVCR back AV panelInOutAudioVideo3 4VCR backVCR back AV panelTV back panel(expanded view)AntennaCableTV backRF coaxial cable (75ohm)not included with TVRFcoaxial cable (75ohm)not included with TVoutputswitch3 4outputswitchoutputswitchLocate the Antenna/Cable jack onthe back of your EntertainmentMachine.Connect the cable that runs fromthe wall directly to this jack,according to the diagram to theright.Remove the back of the remoteand put in two AA batteries.Plug in your TV. Do not plug itinto a switched outlet. YourEntertainment Machine isdesigned to operate on householdcurrent, 120-volt 60 Hertz AC donot attempt to operate it on DCCurrent.Go to page 10 to Auto Programyour Entertainment Machine.12345Connect cable service and a VCR to your Entertainment Machine.back of remoteCable w/Box to VCR andEntertainmentMachineCablew/VCRtoEntertainmentMachine2 0 6 - 3 5 5 1
Guru