P A G E 8Hook Up Your Antenna and VCRIf you have a 75 ohm RF cable,then you don’t need any adapters!Remember, when screwing RFcables onto jacks, clockwise tight-ens, and counterclockwise loosens.Locate the Antenna/Cable jack onthe back of your EntertainmentMachine.Connect the cable that runs fromthe wall directly to this jack,according to the diagram to theright.Remove the back of the remoteand put in two AA batteries.Plug in your EntertainmentMachine. Do not plug it into aswitched outlet. YourEntertainment Machine isdesigned to operate on house-hold current, 120-volt 60 HertzAC do not attempt to operate iton DC Current.Go to page 10 to Auto Programyour Entertainment Machine.12345Connect an antenna and VCR to your Entertainment Machine.back of remoteTV back panel(expanded view)AntennaCableTV backInOutAudioVideo3 4VCR backVCR back AV panelInOutAudioVideo3 4VCR backVCR back AV panelTV back panel(expanded view)AntennaCableTV backFlat wire(300ohm)Antenna300/75 ohmAdapterRF coaxial wire (75 ohm)not included with TV AntennaRF coaxial wire (75ohm)not included with TV RF coaxial wire (75 ohm)not included with TV OutputswitchOutputswitchFlatwire antenna w/VCR toEntertainmentMachineAntenna w/VCR to EntertainmentMachine.2 0 6 - 3 5 5 1
Guru