6Before Use (Continued)PrecautionsHandlingtheunitWhen shipping the unitThe original shipping carton and packing materialscome in handy. For maximum protection, re-pack theunit as it was originally packaged at the factory.When setting up the unitThe picture and sound of a nearby TV, VCR, or radiomay be distorted during playback. In this case, positionthe unit away from the TV, VCR, or radio, or turn off theunit after removing the disc.To keep the surface cleanDo not use volatile liquids, such as insecticide spray,near the unit. Do not leave rubber or plastic products incontact with the unit for a long period of time. They willleave marks on the surface.CleaningtheunitTo clean the cabinetUse a soft, dry cloth. If the surfaces are extremely dirty,use a soft cloth lightly moistened with a mild detergentsolution. Do not use strong solvents such as alcohol,benzine, or thinner, as these might damage the surfaceof the unit.To obtain a clear pictureThe DVD+VCR is a high-tech, precision device. If theoptical pick-up lens and disc drive parts are dirty orworn, the picture quality will be poor.Regular inspection and maintenance are recommendedafter every 1,000 hours of use. (This depends on theoperating environment.)For details, please contact your nearest dealer.NotesonDiscsHandlingdiscsDo not touch the playback side of the disc.Hold the disc by the edges so that fingerprints will notget on the surface.Do not stick paper or tape on the disc.StoringdiscsAfter playing, store the disc in its case.Do not expose the disc to direct sunlight or sources ofheat, or leave it in a parked car exposed to direct sun-light, as there may be a considerable temperatureincrease inside the car.CleaningdiscsFingerprints and dust on the disc can cause poor pic-ture quality and sound distortion. Before playing, cleanthe disc with a clean cloth. Wipe the disc from the cen-ter out.Do not use strong solvents such as alcohol, benzine,thinner, commercially available cleaners, or anti-staticspray intended for older vinyl records.AboutSymbolsAbout thesymbol display“ ” may appear on the TV screen during operation.This icon means the function explained in this owner’smanual is not available on that specific DVD video disc.AboutthediscsymbolsforinstructionsA section whose title has one of the following symbols areapplicable only to those discs represented by the symbol.DVD Audio CDs.MP3 Discs.WMA Discs.JPEG Files.JPEGWMAMP3CDDVDYES NOSelectingtheViewingSourceYou must select one of your output sources (DVD orVCR) to view on the TV screen. • If you want to view DVD deck output source:Press DVD on the remote or DVD/VCR on the front paneluntil DVD indicator in the display window lights and outputsource of DVD deck is viewed on the TV screen.• If you want to view VCR deck output source:Press VCR on the remote or DVD/VCR on the front paneluntil VCR indicator in the display window lights and outputsource of VCR deck is viewed on the TV screen.otesIf you insert a disc while the DVD+VCR is in the VCRmode, the DVD+VCR will switch to DVD mode automatically.If you insert a cassette tape without an erasure prevention tab while the DVD+VCR is in the DVDmode, the DVD+VCR will switch to VCR mode auto-matically.
Wiz