http://www.fixya.com/support/p169034-zenith_r49w36_49_in_rear_projectionSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comThu, 03 Dec 2009 13:42:39 GMT80http://www.fixya.com/support/t3038877-same_issue_here_tv_started_when_hitLet me know if you find a solutionThu, 03 Dec 2009 13:42:39 GMThttp://www.fixya.com/support/t2686782-zenith_49_in_double_vision_curvedAfter reading some other comments this seems to be a common problem. Is this an easy fix to do at home? What is needed to fix this.Thu, 03 Dec 2009 13:42:39 GMThttp://www.fixya.com/support/t2414096-double_vision_zenith_r49w36How do i correct the double vision with a red outline. I have a zenith R49W36. The picture looks like I need 3-D glassesThu, 03 Dec 2009 13:42:39 GMThttp://www.fixya.com/support/t2329657-r49w36_cuts_offWe have a large screen tv with great picture and sound and very little hours on it, even though about five years old. It started cutting off and on and we finally took it to repair shop and were told the whole circuit board was shot and would cost...Thu, 03 Dec 2009 13:42:39 GMThttp://www.fixya.com/support/t1353420-zenith_r49w36_greenmy zenith r49w36 has green & pink colors mostly on the left side of the screen, shows double images on the left side & looks as if everything is being pulled towards the left. Never had any problems before today.Thu, 03 Dec 2009 13:42:39 GMThttp://www.fixya.com/support/t1034186-color_offI seen a question where someone said their color was off and the picture was bowed, and my tv is doing the same thing. A comment left said "i would look for a loose connection around the convergence area". What is the convergence area and where would...Thu, 03 Dec 2009 13:42:39 GMThttp://www.fixya.com/support/t1124372-old_toshibaHi, my name is Veronica, I have a five year old toshiba 58 inch projection TV and suddenly when I turned it on today the colors are all askew. The yellow goes halfway up the screen and the blue is curved towards the middle. My e-mail is...Thu, 03 Dec 2009 13:42:39 GMThttp://www.fixya.com/support/t961712-pic_probi have a zenith r49 w36 tv the pic at the top and bottom of the tv if it were a straght line would slowly distort out to the 3 diffrent colors i tryed the conven. and it didnt work any ideasThu, 03 Dec 2009 13:42:39 GMThttp://www.fixya.com/support/t1096446-no_power_r49w36when i plug the t.v into the outlet, the red power light comes on. when i press the on/off button the red power light turns off for a few seconds then comes back on, but t.v does not power up. also does the same thing when i press the channel up or...Thu, 03 Dec 2009 13:42:39 GMThttp://www.fixya.com/support/t953782-double_imagenDOUBLE IMAGENThu, 03 Dec 2009 13:42:39 GMThttp://www.fixya.com/support/t907779-zenithNo power.Thu, 03 Dec 2009 13:42:39 GMThttp://www.fixya.com/support/t842121-zeneithr49w36_questionI saw you were helpful with someone elses problem..I am hoping you dont mind giving me some advice. The Tv i mentioned above looks as if some pressed a button to make it "widescreen"...but its so wide I cant see the entire picture. I can see...Thu, 03 Dec 2009 13:42:39 GMThttp://www.fixya.com/support/t364324-picture_bowed_color_way_offThis is a 52 in r49w36 my dog ran in the set afther that color's ran and the picture bowed at bottom I tryed the convergance no help, then tryed addjusting the lens just a bit now have 3 color's of red blue and green. I just add HD and the picture...Thu, 03 Dec 2009 13:42:39 GMThttp://www.fixya.com/support/t626259-zenith_r49w36_problemI believe the 3d convergence is out on this tv. I have the classic bows on top and bottom of the screen. Where can i get the ICs STK numbers? and is this something that someone should try to fix at home?Thu, 03 Dec 2009 13:42:39 GMThttp://www.fixya.com/support/t603756-zenith_converg_serv_menu_code_g_zHelp! I have 5 different Zenith Projo models examp.(Z46Z83D8) & (A50M91W9), all with the same convergence 9-1690 convergence board. My manual has been missing for a year and I need the service code to enter convergence adjustments. Endless googling &...Thu, 03 Dec 2009 13:42:39 GMThttp://www.fixya.com/support/t520606-tv_zenith_r49w36Auto Conv not working to remove double look viewing with green and like red color.Thu, 03 Dec 2009 13:42:39 GMThttp://www.fixya.com/support/t131982-auto_convergence_not_workingMy problem is that my TV was working properly until I tried to use the auto convergence button. Since then, the picture looks basically like a 3-d picture. The picture is concaved at the top and bottom of the screen and the colors are not matching...Thu, 03 Dec 2009 13:42:39 GMThttp://www.fixya.com/support/t263404-zenith_rear_projection_tv_displaying_3dAll we did was disconnect the cable and when it was reconnected it showed a 3d image. I was told to do an auto conversion. After i did that the problem got worse and now you can barely see the picture and it is at a wierd inverted angle. What can i...Thu, 03 Dec 2009 13:42:39 GMThttp://www.fixya.com/support/t212046-snap_crackle_popwhen plugged in there is no picture, after about 30sec hdtv led comes on. television makes electrical noises? any idea about what the problem might be? Is this fixable by a novice?Thu, 03 Dec 2009 13:42:39 GMThttp://www.fixya.com/support/t52712-new_zenith_lg_rptv_helpHave a brand new, right out of the box, RPTV Zenith made by LG (not hitachi) TV, with poor convergence. ?Auto convergence doesnt fix it. ?Zenith tech support says to get into the convergence menu, use the same method at last years 60" set....Thu, 03 Dec 2009 13:42:39 GMThttp://www.fixya.com/support/t308001-red_lightThe red light comes on but no picture no it just stoped working one day i was no home so not sure what happend anything u could tell me would be greatThu, 03 Dec 2009 13:42:39 GMThttp://www.fixya.com/support/t224565-zenith_tv_pv4667rkset works fine for about 35 to 45 minutes then screen goes black still have sound. turn set off for about 2 hrs picture will come back for about 35 to 45 minutes. ThanksThu, 03 Dec 2009 13:42:39 GMThttp://www.fixya.com/support/t219785-projection_screen_tv_troublemy phillips magnavox procection screen tv died, I turned it on ,it worked for about ten seconds then died and smelled really hot, now when i hit the on button the on indicator lights for a few seconds then goes out, anybody have any ideas?Thu, 03 Dec 2009 13:42:39 GMThttp://www.fixya.com/support/t226445-tv_wont_turnmy projection tv was working fine one day, then next day I go to turn it on, and it clicks like its going to come on, the little red light in front of tv, will sometimes come on for about 1/4 of a sec, then nothing..... I am guessing its has...Thu, 03 Dec 2009 13:42:39 GMThttp://www.fixya.com/support/t228719-scrambled_picture_vertical_syncI have a Mitsubishi VS683R Rear Projection which appears to have a scrambled picture or sync problem. I have heard in the past that these sets had problems with PIP modules, However this set does not have a seperate PIP PCB. There is a very large...Thu, 03 Dec 2009 13:42:39 GMThttp://www.fixya.com/support/t258911-magnavox_dvix_player_ilo_42i am trying to hook up my magnavox dvix player to my 42" plasma screen. I can get picture but no sound HELP PLEASE!Thu, 03 Dec 2009 13:42:39 GMThttp://www.fixya.com/support/t266735-big_screen_problemHello, Happy thanksgiving! My name is Joe and I turned my tv on today only to hear a poping sound coming from the rear panel and no picture. Well, I'm alittle tool wise so I took the lens asembly off and cleaned it thinking it might help, it didn't....Thu, 03 Dec 2009 13:42:39 GMT