After about 85 - 100 pages printed it will say paper jam 381. There is one page half way out the...
(More)
After about 85 - 100 pages printed it will say paper jam 381. There is one page half way out the exit and one page half way out of the drawer. I have just installed the paper feed rollers, thinking it was that. I am lost, this is the first Oki i have seen and am unable to get any service manuals since we are a Kyocera dealer. Any information on this would be greatly appreciated. Thank You
okidata 5100 black is faded on left side of page. have cleaned, replaced toner - and in past...
(More)
okidata 5100 black is faded on left side of page. have cleaned, replaced toner - and in past replaced drum. Can you tell me the cause and what I need to do?
I have a faint vertical line down the paper when printing. How do I remove that line? On OKI 3200...
(More)
I have a faint vertical line down the paper when printing. How do I remove that line? On OKI 3200 color laser printer
Good day I have an OKI C6100n printer and find it prints Very good, but my problem for the third...
(More)
Good day I have an OKI C6100n printer and find it prints Very good, but my problem for the third time in a year the yellow and magenta drums is not allowing me to finish the toner after the use of about 60% I am having some big streaks, upon viewing the drums the ink is not spreading smoothly over the roller of the drum. NB there are no streaks in the drum. My name is Doreen and some one in new york does my ordering for me. Thanks as I await your replycribe your c6100 okidata drum problem Proble
I blew out everything on the right side of compartment where drum slides in with compressed air....
(More)
I blew out everything on the right side of compartment where drum slides in with compressed air. Problem didn't go away. I also switch blue drum and K drum nothing changed.
After re-seating the M toner cartridge (Oki 3200 laser) for a sensor error (a common occurrance) and...
(More)
After re-seating the M toner cartridge (Oki 3200 laser) for a sensor error (a common occurrance) and then clearing the resulting paper jamb, what prints has a grayish box covering the left side of the page. The print underneath is clear (no fading), it just looks like a box overlayed on top. I changed the black toner cartridge since it was low but still have same problem. Oh, and I smacked the side of the thing in frustration - think I could done something by doing that?
lexmark x1180, changing both black & colour, cant remeber which way round they go in ? Does...
(More)
lexmark x1180, changing both black & colour, cant remeber which way round they go in ? Does it matter?
i have an epson PX700 all in one printer. The printer is not printing using the yellow ink. I have...
(More)
i have an epson PX700 all in one printer. The printer is not printing using the yellow ink. I have replaced the cartridge twice but it still prints it grey. I have cleaned the heads etc but it still isnt printing from the yellow cartridge. Need some help or if someone else has had a similar problem.