http://www.fixya.com/support/p16297-rangemaster_proffessional_110_gasSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comSat, 11 Oct 2008 14:47:44 GMT80http://www.fixya.com/support/t553176-ignition_gas_hob_fails_sometimesThe ignition will always spark on the 2 burners on the left, however for the 2 burners on the right, there will be a spark when the left burners are ignited but will not otherwise. Power must be getting to the spark system and they the parts must be...Sat, 11 Oct 2008 14:47:44 GMThttp://www.fixya.com/support/t183073-timeri changed the timer unit powered up and reset the clock great. however next day after realising i had set the clock a hour slow tried to change the time and it wont let me (this was the original problem )it keeps going to auto and the only way to...Sat, 11 Oct 2008 14:47:44 GMThttp://www.fixya.com/support/t605631-door_glass_shattered_3_hours_afterOn our 22 month old Rangemaster Professional 110 gas cooker, we heard a loud shatter then the tinkling of glass as the pieces fell down inside the door. The oven had been used some 3 hours before. Any one know the reason for this, is it a...Sat, 11 Oct 2008 14:47:44 GMThttp://www.fixya.com/support/t605631-door_glass_shattered_3_hours_afterOn our 22 month old Rangemaster Professional 110 gas cooker, we heard a loud shatter then the tinkling of glass as the pieces fell down inside the door. The oven had been used some 3 hours before. Any one know the reason for this, is it a...Sat, 11 Oct 2008 14:47:44 GMThttp://www.fixya.com/support/t945751-replacing_radiant_elementreplacing a radiant element on a maytag glass top range I'm having strange problems with the two right elements of my MER5770 The front larger dual element will only operate at high heat. When turning on the rear element, the front dual element also...Sat, 11 Oct 2008 14:47:44 GMThttp://www.fixya.com/support/t126355-oven_not_lightWhen I turn on the oven, the display goes to PrE (preheat mode) but the oven does not heat up. The ceramic igniters are cold, there is no smell or sound of gas. I hear a relay click in the control panel when I press Start. It is also dead in Broil...Sat, 11 Oct 2008 14:47:44 GMThttp://www.fixya.com/support/t452019-stained_gas_range_burner_gratesHave a GE Profile gas range..the gray enamel (?) burner grates stain very badly with general use and nothing seems to help in cleaning them. I am told that anything with any scrubbing power is a no-no. Does anyone have any help? Thank you.Sat, 11 Oct 2008 14:47:44 GMThttp://www.fixya.com/support/t13895-clean_control_panel_range_or_ovenHow do I clean my control panel on my range or oven?Sat, 11 Oct 2008 14:47:44 GMThttp://www.fixya.com/support/t391447-oven_burnoutafter a power outage, my oven stopped working,but the stove top still works. all the digital settings are gone including the clock.Sat, 11 Oct 2008 14:47:44 GMThttp://www.fixya.com/support/t102907-oven_clock_inopon the display there is one red dot that is all. the clock and oven is inop. thank you for your help in advance.Roy Clark rclark1960@msn.comSat, 11 Oct 2008 14:47:44 GMThttp://www.fixya.com/support/t188603-oven_not_workingon 8/24/7 went to preheat oven, notice that display kept blinking on and off along with a clicking noise, oven did eventually heat up it took it awhile. as of 8/26 oven does not work at all timer display is just blank.But the top of the stove top...Sat, 11 Oct 2008 14:47:44 GMThttp://www.fixya.com/support/t398631-oven_door_unlockOven door is locked, won't allow reset via clear/off, I unplugged, hoping to "reboot" but when I plugged it back in, same status. Time didn't help: I eft it "locked" overnight. Still won't clear. . (... I accidentally hit "clean" last night and...Sat, 11 Oct 2008 14:47:44 GMThttp://www.fixya.com/support/t194031-oven_will_not_heat_upOn 9/03/07 we ran the self clean on our kenmore 9242 and now the bottom heat element doesn't work. Everything else is fine and no error codes come up. The wires and element seem to Ohm out fine.Sat, 11 Oct 2008 14:47:44 GMThttp://www.fixya.com/support/t195691-shattered_glass_top_hotpoint_rangeThis top was shattered and we have a replacement, but there are no instructions on how to install this. HELPSat, 11 Oct 2008 14:47:44 GMThttp://www.fixya.com/support/t215043-uneven_oven_tempWe have a tappan,model no.31-2752-00/01.The tempture after turning oven on is about 100 to150 degrees different between oven setting and oven thermomerter,I've bought to of them to make sure the first one wasen't faulty.Same problem.Please help!!...Sat, 11 Oct 2008 14:47:44 GMThttp://www.fixya.com/support/t219027-jenn_air_manualmodel number jds9860aap please hellp me find repair manual, electical schematics, etc...Sat, 11 Oct 2008 14:47:44 GMThttp://www.fixya.com/support/t241131-stove_burner_over_heating_low_settingwhen i lowered heat from 4 to 3 ,the element became bright red as if on high.Sat, 11 Oct 2008 14:47:44 GMThttp://www.fixya.com/support/t242115-oven_will_not_workwhirlpool gas range sf325/oven will not work at all/top burners work fine/no fault codeSat, 11 Oct 2008 14:47:44 GMThttp://www.fixya.com/support/t247063-error_codeI was cleaning my ge range when an error code appeared, F7 dc. I pressed off, then turned the breaker off to the oven. When I turned the power back on the error code reappeared. What can I do next?Sat, 11 Oct 2008 14:47:44 GMThttp://www.fixya.com/support/t267143-oven_will_not_turnfollowed instructions on activating oven, but it will not heat.Sat, 11 Oct 2008 14:47:44 GMThttp://www.fixya.com/support/t359023-error_code_f_4I have a MayTag range that came with the house I bought. I can't find a model number. When i try to use the oven, i get an error code F-4 and i have no idea what it means. ... HELP!Sat, 11 Oct 2008 14:47:44 GMThttp://www.fixya.com/support/t322883-fuse_seems_burnedHi We have a new macrowave which came with the house that we just bought. I think I turned it on when it was open and then it started blinking and now it doesn't work. It lets me arrange the clock,but when I open the door, the clock goes off and the...Sat, 11 Oct 2008 14:47:44 GMThttp://www.fixya.com/support/t436475-dont_know_lockDon't know how to lock oven for self-cleaning. Do not have users' manual.Sat, 11 Oct 2008 14:47:44 GMThttp://www.fixya.com/support/t479979-whirlpool_super_capacity_465_gas_stoveI have a gas stove. It is a super capacity 465 Accubake System. The display started beeping. It says do or. When you push any buttons, it flashes E2 in red and F3 in green. What does this mean??Sat, 11 Oct 2008 14:47:44 GMThttp://www.fixya.com/support/t555951-coleman_stove_model_412_5621_willColeman stove, model 412-5621, will not pressurize the fuel tank. The pump appears to need some replacement part or parts. What should I do?Sat, 11 Oct 2008 14:47:44 GMThttp://www.fixya.com/support/t564699-like_knowI would like to know the model no of the Lofra Oven we bought in 2001. Its a Upright cooker Lofra Maxima, 900mm Gas top & electric oven. The under carriage element has burnt out and needs replacing and the spare parts company will not proceed...Sat, 11 Oct 2008 14:47:44 GMThttp://www.fixya.com/support/t581815-hot_surface_indicator_lighthot surface indicator light won't turn offSat, 11 Oct 2008 14:47:44 GMThttp://www.fixya.com/support/t609335-set_stoveI set my stove to self clean for the oven and received 2 errors....fe51 and fe20...and not able to locate the manual to check troubleshooting...please help..RhondaSat, 11 Oct 2008 14:47:44 GMThttp://www.fixya.com/support/t640647-smeg_sa420xI have a smeg oven SA420X, multi functional oven. The clock has melted due to grilling with the door open. Is this a common issue?, or is this a user fault? My tenant has stated that the smeg is one of the only ovens, that need the door to be closed?...Sat, 11 Oct 2008 14:47:44 GMThttp://www.fixya.com/support/t867603-wolf_gourmet_range_oven_lighting_delayI bought a house with a Wolf Gourmet ?professional 6 burner range/convection oven. It has worked fine, but recently the oven can take up to 10 minutes to light and start heating up. It does eventually light on its own and the pilot light can be seen...Sat, 11 Oct 2008 14:47:44 GMT