Technics SUV500 2-Channel Amplifier

Problems & Solutions

• Technics SU-G75, No Speaker Output, Headphones

  Hello. My name is Dave. Your amp either a condition called DC Offset, meaning the amplifier is dam...

  • Paul Solare
  • 11/9/2011 3:35:03 AM
  • 290 Views

  2 Solutions

• My Technics SU-V55A amplifier cuts out after a

  Generally speaking, an amp attempts to protect itself from heat, shorts, overloads and operator exu...

  • Levi Handsford
  • 10/31/2011 10:17:11 PM
  • 447 Views

  2 Solutions

• I need an Operator Manual for a Technics Amplifier

  HI,   I have the User manual of Technics SU-600  in pdf format. If you can sent your ema...

  • Paul Watson
  • 10/26/2011 8:21:36 PM
  • 557 Views

  2 Solutions

• i have a technics SU-v500m2 amplifier connected

  Let's establish which is the IN and which is the OUT here. The PC is a Line Level source so its OUT...

  • darrell martin
  • 9/24/2011 11:57:54 AM
  • 349 Views

  2 Solutions

• Technics SE-A 2000. Powers up

  It is not so easy to probe into to find a protection fault condition. The fault can be your output dri...

  • paulricha936
  • 4/28/2011 11:16:28 AM
  • 313 Views

  1 Solution

• Hi, My amp is a

  Generally speaking, an amp protects itself from heat, shorts, overloads and operator exuberance by ref...

  • brassic
  • 4/6/2011 12:01:58 PM
  • 185 Views

  1 Solution

• Technics SA-GX370 amplifier

  Hi One of the amplifiers is shorted. Take to a reputable repair person or check www.micromendllc.com

  • 1stimpressio
  • 5/7/2010 2:49:13 PM
  • 1175 Views

  1 Solution

• i have a technics su-g88 a/v control amp, when i

  some technics models use hybrid o/p i.cs and when they go faulty shutdown the o/p to both channels. it ...

  • dparks78735
  • 2/7/2010 4:26:46 AM
  • 581 Views

  1 Solution

• TRANSFORMER BLOWN

  Hi Most  transformers have a thermal fuse fitted, this can be bypassed/replaced  to get the amp wor...

  • abbigail03
  • 1/28/2009 2:36:25 PM
  • 225 Views

  1 Solution

• Technics SU-G75

  I had the same problem. The solution to me was presoldering transistor Q708. htt...

  • yamaharhino7
  • 2/5/2009 8:51:51 PM
  • 1820 Views

  6 Solutions

• No Sound When Records are recorded to Computer via the...

  use tape1 record out to the Line in jack on your computer. you should then be able to record to .wa...

  • coolhandsbob
  • 12/22/2008 12:50:15 AM
  • 41 Views

  1 Solution

• SU-V460 cuts out at high volumes

  Hi samipoyo You need to check the amp for dry solder joints about the output stages. These amps are not...

  • samipoyo
  • 4/30/2008 1:00:37 PM
  • 196 Views

  1 Solution

• Technics SUV500 Amplifier

  check volume balance between right and left-then change inter connection between sound source and amp...

  • dogton
  • 2/17/2008 5:28:15 PM
  • 173 Views

  2 Solutions

• Technics SU-X955 amplifier. which speakers ?

  Helo you have to use speaker of the same wattage you have now chage crossover to get new clear dig...

  • dogton
  • 2/11/2008 11:55:35 AM
  • 1293 Views

  1 Solution

• cuts out

  Check your speakers. your speaker may be defective

  • ez4emma
  • 12/17/2007 6:03:22 PM
  • 208 Views

  1 Solution