20 Most Recent Microsoft Windows XP Professional SP2 - Page 7 Questions & Answers

Hi, re-install the softwareand run the programme again, if it does not install,use another Microsoft windows XP SP2..

After doing this,get back tome...

Microsoft... | Answered on May 13, 2011


How to open the default Bluetooth file transfer window in windows xp

1> Go to start
2> Click on Run
3> And type "fsquirt"
which will open the default Bluetooth file transfer wizard..

on May 12, 2011 | Microsoft Windows XP Professional...

Your pc will no more function normally , downloads will be difficult or unsuccessful , some files might desappear ...
Download and install MalwareBytes ( it's free ) from http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html . It's currently one of the best malware / spyware killer and will radically clean your system .
Best regards,
fanaudi .

Microsoft... | Answered on May 11, 2011

To set up a system restore point, follow these steps:
  1. Close any programs that are open.
  2. Click Start, point to All Programs, point to Accessories, point to System Tools, and then click System Restore. The System Restore Wizard opens.

    Note If the System Restore Wizard does not open, the System Restore feature may be turned off. To turn System Restore on, see the "More Information" section in this article.
  3. Click Create a restore point, and then click Next.
  4. In Restore point description box, type a description for the restore point. Use a description that is easy to understand. If you are creating a restore point before you install specific software or hardware, you could use that information in the description.

    Note The date and time are automatically added to your restore point. Therefore, you do not have to use them in your description.
  5. Do one of the following:
    • To finish creating this restore point, click the Create button. The System Restore Wizard notifies you when the restore point is created.
    • To stop creating a restore point and to return to the Welcome to System Restore page, click the Back button.
    • To stop creating a restore point and to exit the System Restore Wizard, click the Cancel button.
  6. When you are finished, click the Close button.
Congratulations! You have successfully created a restore point, and you are finished.

Good luck and hope it helps.

Microsoft... | Answered on May 04, 2011

.MSU is a Microsoft UPDATE file....designed to be downloaded and installed as part of Windows Update.

I suggest you run the Windows update and choose which items you want to install from the list (assuming it includes Powershell) otherwise, locate a standalone installer for the powershell, which should have a .MSI or .EXE extension.

Good Luck

Microsoft... | Answered on Apr 28, 2011

Hi! Click on the start button > My Computer > Right click on it > Select Properties and it will show you the information of your system . Hope this will help you . God Bless!

Microsoft... | Answered on Apr 27, 2011

If it asks for disk two, simply unmount disk 1 and then mount disk 2 through magic iso.
This would mimic removing disc one from the drive and inserting disk two. Of course this will only work if it installs while keeping windows running, and not in some restart mode for installation.
To check if this is the case, open the installer, and if you can still click on the start button and perhaps even launch your web browser, you know the method described above should work.

Microsoft... | Answered on Apr 21, 2011

There are a lot of reason why this is happening. It may be a newly installed hardware, one of the hardware is damaged or it may also be the RAM. You can try reseating the ram first. If that does not help, if you have hardware connected through USB, disconnect it first.
Install the operating system (win XP) with the mouse, keyboard and the monitor connected. Other peripherals (hardware) should be disconnected to the tower.

Microsoft... | Answered on Apr 20, 2011

Do a system restore back about a week.
You'll probably have to do it in safe mode.

Microsoft... | Answered on Apr 13, 2011

It is on the orange sticker that should either be on the box or on the CD case. It is the series of letters and numbers after CD Key:

Microsoft... | Answered on Apr 10, 2011

Here is a link to microsoft that explains this particular trojan.

Although I work on lots of computers, and do see lots of viruses, this is not one that I see very often, but microsoft does seem to know all about it, and on the page it will give you suggestions on what to do to get rid of it.


I would go check it out, and see what you think, maybe it will give you ideas that you haven't tried yet.

However, since you are running xp, first try this:

Click your start button
select run
next type in MRT
press enter

This will start the microsoft malicious software removal tool.

Select a FULL scan, and let it scan your entire system.

It might very well detect and remove your problem, along with any other suspicious software that it finds!

I hope this helps you out, and good luck !

Microsoft... | Answered on Apr 05, 2011

you shouldn't be asking this question here

Microsoft... | Answered on Apr 05, 2011

I'd just go to windows update already on your laptop.

Start - All programmes - windows update (top left hand corner). If you choose the "custom" option for downloads, you should be able to see/check all the downloads and updates. These should also include SP3.

Microsoft... | Answered on Mar 30, 2011

XP is a commercial program, you cant download it for free you have to buy it.

Microsoft... | Answered on Mar 28, 2011

Sounds like a case of spyware or malware infections on your PC....

Read this thread @ http://tpsconsulting.com/spywareinstructions.htm

Hope it helps.

Microsoft... | Answered on Mar 28, 2011

hi dear ,

kindly add this email immaculate_guy88@yahoo.com. i can tell u easily through chat.

Microsoft... | Answered on Mar 24, 2011

click start control panel Open User Accounts in Control Panel. On the Users tab, click the name of the user whose password you want to change, and then click Reset Password. In New password and Confirm new password, type the new password, and then click OK. Notes You can change passwords only for local computer accounts, such as guest, administrator, or accounts you create for your computer. You cannot change your network logon password in User Accounts. To change your own password, press CTRL ALT DELETE and then click Change Password
hope this helps

Microsoft... | Answered on Mar 21, 2011

Are you sure about that????? Windows ME was pretty terrible, and it is no longer supported by Microsoft, and XP is a more updated OS. If you mean upgrade to XP from ME, you need a valid Windows XP disk and you can see my previous post to do a rebuild:


Microsoft... | Answered on Mar 08, 2011

Your question only indicated that you had Windows XP Pro, but not which Microsoft Office product you have. 'Microsoft Office Publisher is part of the Microsoft Office suite. You can either purchase Publisher by itself, or the entire suite.
You can download a trial and/or buy the suite on this page: http://office.microsoft.com/en-us/products/get-microsoft-publisher-FX102159668.aspx

Microsoft... | Answered on Mar 06, 2011

Not finding what you are looking for?
Microsoft Windows XP Professional SP2 Logo

606 questions posted

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

3015 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Alun Cox

Level 3 Expert

2679 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

XP Microsoft

  • XP Microsoft

Most Popular Question

universal key windows xp sp 2

  • Computers & Internet