Top 20
Albatron LWX-30AMS-3 30 in. HDTV-Ready LCD Television Questions & Answers
Tryin to progam my sky remote to tv got a 32in
Firstly, try changing the batteries. If you've already changed then the remote has probably lost the TV code.
If you can post your exact Alba Model number, I will post the correct code and programming instructions for you.
It would also be useful if you can post you Sky remote version number - it's on a sticker in the battery compartment. I need to know if it's Rev 8, Rev 6, Rev 4 or just RC1600/00.
10/15/2010 9:39:25 AM •
Albatron...
•
772 views • 2 helpful votes
No picture, just has
When you try to turn on does the tv light indicator, blink in sets? If it does that means you have blown lamp. You can even replaced just do a model search on your telvision and typed in lamp. There should be a part number for your lamp to order. Be careful ordering that, because there are website that well sell you refurbish products.
12/17/2009 9:17:09 PM •
Albatron...
•
82 views • 0 helpful votes
How can I find whats on next on my alba tv remote ?
Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.
This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
7/26/2016 1:13:27 PM •
Albatron...
•
61 views • 0 helpful votes
Alba led16911dvd
my dvd combi works fine but only plays the dvds in black and white and the dvd part of the remote doesnt work
1/19/2012 10:26:20 PM •
Albatron...
•
471 views • 0 helpful votes
When i turn my t.v on it comes on but goes off after 15 seconds or so the screen goes black and you can here sound then it turns off can you help
Hello,This issue is related to a power problem in as much as the TV turns off on it's own.The problem is consistent with overheating on the power supply board of the TV. it might have worked fine in the past, but that's electronics for you. Power surge, irregular power supply, excess power supply, etc can affect the unit thereby making it to misbehave.The power supply board of the TV has few capacitors and IC. If any of these IC's gets short or become weak, it can cause the TV to turn off on it's own.When current passes from electric outlet to the power supply board of TV. The current also goes to the weak/faulty part, then the current stops or slow and the board overheats and TV shuts off on it's own.To solve this issue, check the power supply board and read it with a meter and continuity tester, in order to detect the faulty part and replace the faulty part on the board which is short due to which power supply boardYou can buy these capacitors at any Fry's or Radioshack store or you can order them online at vendors like "mcmelectronics.com"(look for electrolytic capacitors). After replacing these capacitor(capacitors) most likely the normal operation will be restored. Or you can by a refurbished complete power board from www/shopjimmy.com to save you some stress.Note: There may be also some other causes for this symptom ,like a defective T con board ,or main board,but the bulged top capacitors are the most common cause for this issue.If you don't have the ability to read the fault, then you might be needing the help of a repairman or you can call a friend that has the ability to help you out.I wish you the best of luck.Regards.
1/5/2012 9:52:24 PM •
Albatron...
•
135 views • 1 helpful votes
Blue light flashing
In most
cases the standby light might blink with different rapidity to indicate a fault
relevant to the processor. It is possible that most of these indicate that
there are errors in the processing section. Since there is a possible short or
leak in the circuit the output driver section can take in huge current to trip
the SMPS or from advice from the micro processor. Remove the power plugs and make sure that
high voltage sections are discharged of the potential stored in capacitors.
Look for visible signs of leak or of busted capacitors. Look for bulged
capacitors or damaged components- burnt or busted. Use a multi-meter to check
the continuity or shorting in components, if so detach from circuit and test. If
the voltage builds up and the set power ON and then shuts up then the suspected
section must be checked in detail.
The
processor must have the +5 voltage to the function properly, the +B and
secondary voltages also must be checked to infer the fault. Trace with caution
and in running through the signal path , circuit trail.
Check for
tips to check the SMPS unit:
http://www.fixya.com/support/r5826301-working_switch_mode_power_supplies
1/9/2012 1:29:29 PM •
Albatron...
•
50 views • 0 helpful votes
Tcl power comes on but no picture or sound. Tv has backlight lights when powered on
Hello ! It sounds like you are experiencing some issues with your TCL TV. It's great that the backlight lights are working fine. The blinking *********** light and white screen definitely indicate a problem.
One possible issue could be with the internal circuitry or the display panel itself. It's best to contact TCL support or a professional technician to diagnose and fix the problem. In the meantime, you can try power cycling the TV by unplugging it for a few minutes and then plugging it back in.
As for uploading a video, you can try connecting your device to a computer and transferring the video file that way. Alternatively, you can upload the video to a platform like YouTube and share the link for others to view. I hope this helps!
Where is the Google on the Matertech?
It appears that there could be miscommunication. As of my previous update in January 2022, Matertech doesn't seem to be a commonly known term or corporation. On the other hand, if you're talking about "Google," it's a well-known worldwide technological corporation that specializes in internet-related services and goods, such as search engines, cloud computing, online advertising technologies, software, and hardware.
Google's official website or an internet search utilizing one of the search engines like Google itself are usually the easiest ways to get information about Google. If "Matertech" relates to a particular thing or idea, further information could be helpful in order to provide a more precise answer.
2012 troybiilt super pony transmission axel is trying to slide out how to fix it
The axles may have substantial amount of in/out play, 1/4 inch or more. Does the axle in question actually drive the wheel or does it freewheel?
It's a typical differential so if you get both wheels off the ground and spin one wheel, the other wheel should rotate in the opposite direction.
The axles are retained by the differential assembly (inside transmission) so if the axle is truly falling out, to fix it will require transmission be removed and opened. Probably not an economical repair unless you can DYI or replace with good used unit.
Model # H1506FWH will not shut off
Do not use this Husky Air Compressor until this issue is resolved. It is unsafe.
Verify that the cut-out level setting is functioning properly. If not, it could be the reason why your air compressor won't shut off
Check if the pressure in your tank exceeds the average PSI range for your tank. If so, the pressure switch may be faulty or no longer working.
Consult the troubleshooting guide in the manual.
HUSKY H1506F OPERATOR'S MANUAL Pdf Download ' ManualsLib
How do I download Showmax on my Sinotec STL-55G50 smart tv
- Turn on your Smart TV: Ensure your Sinotec TV is powered on and connected to the internet.
- Navigate to the App Store: Look for an app store or marketplace on your TV's home screen. It might be called something like "App Store," "Google Play Store," or "Smart Hub."
- Search for Showmax: Use the search function within the app store to search for the Showmax app. You can usually find this by typing "Showmax" into the search bar using your TV remote.
- Select and Install the Showmax App: Once you've located the Showmax app in the app store search results, select it, and then choose the option to install or download it to your TV.
- Open the Showmax App: After the installation is complete, navigate back to your TV's home screen and locate the Showmax app icon. Select it to open the app.
- Sign In or Sign Up: If you already have a Showmax account, sign in using your credentials. If not, you may need to sign up for a Showmax account using your email address and creating a password.
- Start Watching: Once you're signed in, you should be able to start browsing and watching content on Showmax.
- Hope this helps
Not finding what you are looking for?