Mitsubishi WS-55613 55" Rear Projection HDTV - Answered Questions & Fixed issues

my 55613 tv wont turn on just blinking green light

Check the remote control for its infrared emission. Check it with fresh batteries. Check it by pressing all the keys. You can detect the presence of infra-red emission from the remote control, using a cell-phone camera. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. In some cases, the remote control might need to clean. http://electronicshelponline.blogspot.com/ http://remotesearch.blogspot.com/ Search the site by type in this key phrase "how to test a remote control "in the "search box at the top right of the display window of the Homepage" to get the related post quickly. https://youtu.be/wUpnETSm6_k https://www.youtube.com/watch?v=jsSCNCW3IbQ [open and clean] https://www.youtube.com/watch?v=Qp-l1uh-5gE [open and clean]

A hint--if the green power light comes on for a few moments and goes off do the self check this set has.

On the front of the set press and hold BOTH THE MENU AND INPUT (OR DEVICE) BUTTONS BOTH FOR AT LEAST 5 SECONDS. Release both buttons and look at the power button.

If this is the case the power light will blink a two digit error code--most common in this case is 2 blinks, a pause and 2 blinks--it will repeat the code up to ten times.

Let me know if you find an error code or the power light just blinks and never stops.

If this helped you rate this solution as I do this here for free.

SD TECH

This model TV is a CRT projection and does not have a lamp. It has 3 CRT tubes (Red, Green and Blue). Unfortunately, you may need to have a trained TV technician diagnose this further.

Light flashes two times, then pauses, then two times. Help!

replace the hold its worn out

1080 is a High Definition setting. If your Television is HD capabilities you need to make sure that the programming that you are viewing is being broadcasted in 1080. If it is not then you will see a difference in picture quality and sound. If no color at all and program being watch is HD programming check your connections on back of Television. depending on what kind of input the Television is receiving you might need to try new cables or a new input. Good luck

To begin with the model listed here does not have a lamp, it has three picture tubes so we have the wrong model number--willing to try to help but need correct model number.

you can get a digital station since your tv is supported with a digital broadcast tv standard.

Ur tv convergence is dead.U must know how to solders?The 2 STK convergence ICS.and some or all it resistors must change.Tries websites Tv repair World.com,Tvrepairkits.com to repair it ur self.The shop will cost u $300 for parts and labors.

Projection TV sets have two very common problems. One is convergence ( 3D/Warped video) the other is CRT fluid ( Dull Video). Below are more details for both items. Also, complete repair kits with instructions and repair support are avail from site such as www.TvRepairKits.com Common Problem #1) Convergence has gone outProjection TV sets need to have all three colors - RED - BLUE - GREEN - lined up correctly on the screen in order for the video to look normal. When its out of alignment the video will look 3D, wavy, distorted, etc. Most of the time you just need to adjust your convergence in the TV menu. If you cannot adjust it in the menu - then your convergence is broken and needs to be repaired. This is a very common failure on these projection sets and a fairly simple DIY fix. All projection sets including Samsung, RCA, Sony, Philip Magnavox, Panasonic, Pioneer, Akai, GE, JVC, Toshiba, and others at some point will have the same problem. Common Symptoms include....

• Screen looks 3D
• Colors don't line up
• One or more colors can't be adjusted when using the convergence menu.
• Screen is bowed or warped.
• TV shuts off after powering on. The power light will blink. TV may also make a chirping noise.

Here are some pics of convergence problems. SOLUTION #1What you will need to do is convergence. You can get a repair kit from TvRepairKits.com . It includes replacement parts,step by step instructions, support, etc.Common Problem #2) CRT Fluid is CloudyProjection TV tubes have a liquid coolant that is used to keep them from overheating. After many years the coolant in the blue and green tubes will become cloudy and cause the screen to look dull, red/orange, etc. You may even see halos around images. Picture of a set that needs the fluid changed. TV set after fluid change SOLUTIONWhat you will need to do is replace the coolant and clean the crt. You can get a repair kit from TvRepairKits.com . It includes replacement coolant,step by step instructions, support, etc.

In order to clean the Picture Tube Lenses you will have to remove the front screen. As for cleaning the screen use only correct screen cleaning solution or just replace the front screen if it is streak to badly.

The DM is not completeing the boot sequence which is caused by the DM capacitors needing replacement heres a link to the repair kit for your model. The kit contains the replacement capacitors plus free instructions with pictures.
http://servicemanuals.vstore.ca/product_info.php/pName/mitsubishi-v23-dm-repair-kit/cName/repair-kits

Hit the front of the tv near the blinking light... give it a good rap or two. See if this helps. Helped mine. I had the same problem and the tech who came out to the house told me that it would work and it did! I could hardly believe it but it worked.

Good day!

That is usually happens when the TV is not compatible to the PS3 because the graphics of the PS3 is very resolution.

The qualification standards of that TV is not reaching the higher resolution of PS3 even your TV is HDTV.

Thank you very much for using fixYa.

I would be surprised if the model listed here has a HDMI input--it should only have a single component HD input marked as DTV.

1. "wavy" may mean a signal problem inside the set--are you seeing colors out of position or skewed around letters etc?2. Does it do it when a DVD is played? (this will rule out certain things).SD TECH

Look in menu of set (and if using a box for signal to set) under closed captions and there TEXT which is what causes the box to appear--switch the text off.

The set has three hidden menus, one of which is the option menu--with the Mitsubishi remote and a four digit code in that you can do a hard reset of the entire set---if a glitch has occurred I have seen this fix no sound, bad video, missing inputs, you name it.It cannot hurt and may help and it is model specific as far as the 4 digit code.

IC8C01 267P173010 HIC - STK394-250 IC8C02 267P173010 HIC - STK394-250 THESE are the location number, part number and actual number of the two convergence chips which will have to be replaced.