20 Most Recent Micro Innovations PD905P Questions & Answers

You should not need a driver for a USB mouse, just plug it in and wait 2 minutes. It will be auto-detected.

http://www.helpdrivers.com/keyboards/Micro_Innovations/PD905P_Optical_Travel_Mouse/

THE MOUSE IS DEFECTIVE REPLACE IT.

Normal 0 Turn the mouse over and find the small rest/connect button on the bottom of the mouse and press it. This should connect the mouse to the receiver and work properly. If not, try pressing the receiver button and then press the button on the mouse. This should be done whenever you change batteries or glitch. Hope this helps you. Bud

here is the link you can down load it or just read it. https://www.gitbook.com/book/rediscagubath/ivso-bluetooth-keyboard-case-manual/details.

Go into the display options and brighten up the picture.

Download and install it will help you. http://www.iobit.com/en/driver-booster.php

any mouse will work if it has the right plug into the computer connection, get a new one at walmart or best buy

You can buy one almost anywhere....

I'd forget Windows 10 if I were you. Information on you is collected and sent to Microsoft even if you turn them all off during installation. Nobody gets to spy on my computer. That's why I won't upgrade to 10. As for drivers, you may have to go to Micro Innovations website for drivers , if they even have them. I have a perfectly good dye sublimation printer I cannot use on anything later that win 98 because of the lack of drivers.

No need for driver download, the pc should automatically detect the mouse as an inout device.