Questions & Answers
I have purchased a Steel
Well, this is puzzling because all the drivers on the Steel Series 3GC site are for Windows 7 or above. The site doesn't even list the model you just purchased nor the 3.7 version of driver (which appears to be available from Softpedia rather than Steel.) 3.7 purportedly works for XP but I have seen advice suggesting that no devices other than keyboard and mouse ought to be connected to the USB ports during its installation. Uninstall the driver, reboot, install the driver again without the device being connected. I would even reboot it then, before connecting the controller. Perhaps subsequent connection of the controller will be recognized. Go into Device Manager and see if it is then recognized in the USB listings. If there is no exclamation point there beside the driver, you may have gotten lucky.
3,339 views | 1 helpful votes
Sd Card reader not recognising SDHC cards
When You Insert your SD card into the internal card reader, then the SD card is not recognised by the system and the SD card drive doesn't show there. The problem can be because of driver issue, system issue and device issue.
To fix the problem you need to go at device manager if there is a yelllow sign in SD card controller, the problem is most probably caused by a driver issue. Then you need to update the driver. You can also download the driver for your card reader.
Also, check if your SD Card is broken. You can also check it into different devices port.
If it is detected then you can backup of your data.
If the problem not resolved by any means and you require you SD Card data then I will suggest you read - https://www.stellarinfo.co.in/services/removable-media-recovery.php
13,578 views | 1 helpful votes
Lg flatron w2234s monitor is flashing ??
I am going to suggest if it's only 3 months old you should take it back to where you bought it. Mine quit working right a few weeks after I bought it and they gave me a new one. Be sure you take your receipt with you. Even new things can mess up.
12,550 views | 0 helpful votes
WD Elements 1TB stopped
I would remove the data with another computer using a usb adapter and then re format the drive but check your motherboard will support more than 528Gb chunks. If it won't, partition the drive accordingly.
458 views | 0 helpful votes
Not finding what you are looking for?