20 Most Recent Nu Mark Numark Cdx Table Top CD Player CD Player Questions & Answers


Sounds like the operating system has crashed somewhat.... Is it still operational enough to read a firmware update disc?

Nu Mark Numark... | Answered on Sep 10, 2013


HERE YA GO!! GOOD OLD FASHIONED BEATING FIXED MINE... I PROMISE THIS. When you turn on your CDX... HIT THE SQUARE AREA where the play button and the cue buttons are located. It will jump to CDX on the screen and work fine. Mine did this and i messed around with bumping it and stuff and figured this out

Nu Mark Numark... | Answered on Nov 01, 2012


Hi Mitchdias,
Have you tried downloading the most recent rom update for the CDN-90? All you need to do is download it from here http://www.numark.com/contentmgr/showdetails.php/id/1493/tt/5 , then burn the download to disc. Once that's done, put the disc into the player, switch the player off and wait 10 seconds, then switch it back on again. the player will read the disc and flash the ROM. this should reset the player for you. Before you ask, you can out the disc into either side of the player. Full instructions are given with the download.

Nu Mark Numark... | Answered on Nov 01, 2012


all light on solution... replug the 2 cables for integrated circuit on the picture.8_31_2012_6_02_32_am.jpg

Nu Mark Numark... | Answered on Nov 01, 2012


hello
faced the same pb only with MP3s audio tunes burnt on cds (crackles..pops ect ) - no prob with normal cds

Nu Mark Numark... | Answered on Oct 28, 2012


i solved the all lights on problem by replugging 2 cables into the cdx. it's the 2 integrated 3 pin circuit for cdx power, they are not soldred but just plugged in. look the picture for detailles.8_31_2012_5_52_57_am.jpg

Nu Mark Numark... | Answered on Aug 31, 2012


GO ONTO YOUTUBE. TYPE IN NUMARK CDX FIX. Follow the video as instructed and this will be fixed.

Nu Mark Numark... | Answered on Aug 09, 2012


Replace the drive!!! I have six and this is the ONLY problem I see with these units!

Nu Mark Numark... | Answered on Sep 11, 2011


get a new one problem solved

Nu Mark Numark... | Answered on Dec 20, 2010


2 possible causes:
Motor Controller PCB: http://ep.yimg.com/ca/I/yhst-15436568105612_2102_25839247

Or motor itself: http://ep.yimg.com/ca/I/yhst-15436568105612_2102_63389888

You may be able to visually tell if there is a smoked resistor on Controller board.

Nu Mark Numark... | Answered on May 06, 2010


Sounds like the power PCB. Swollen caps. Caps can be replaced, available at tech shops.

Nu Mark Numark... | Answered on May 06, 2010


Are you getting power? whats the model # and do you have units plugged into a power surger

Nu Mark Numark... | Answered on Dec 02, 2009

Not finding what you are looking for?
Nu Mark Numark Cdx Table Top CD Player CD Player Logo

50 questions posted

Ask a Question

Usually answered in minutes!

Top Nu Mark Audio Players & Recorders Experts

da surgen

Level 2 Expert

95 Answers

The Knight
The Knight

Level 3 Expert

76046 Answers

Morne Olivier

Level 2 Expert

257 Answers

Are you a Nu Mark Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Nu Mark Audio Players & Recorders

  • Nu Mark Audio Players & Recorders

Most Popular Question

all lights but dosent get reading in

  • Audio Players & Recorders
Loading...