Orion TVDVD092 9 in. TV/DVD Combo - Answered Questions & Fixed issues

All the universal remote controls that I've had have come with a fairly comprehensive set of control codes for various appliances. If you don't have the manual you'll have to search online for a pdf relating to your universal which contains these codes.

Orion TVDVD092 9... | Answered on Jun 29, 2015 | 339 views

Sansui customer support for Orion is;
1-800-289-0980 8-8 central time
can also email at; custsvc@orionsalesinc.com

Orion TVDVD092 9... | Answered on Oct 21, 2014 | 150 views

In this case is likely that the optical pickup in the player is either dirty or bad.

Orion TVDVD092 9... | Answered on May 29, 2012 | 36 views

If the remote does even one function the receiver in the set is not the problem. It is possible if the remote is designed to program to another unit you have it in the wrong mode TV or Vcr or something other than your set.

Orion TVDVD092 9... | Answered on May 25, 2012 | 145 views

Check with an other disc. If the video format doesn't match this type of fault can occur.

Orion TVDVD092 9... | Answered on Apr 30, 2012 | 68 views

cannot be done---all essential controls are in the remote.

Orion TVDVD092 9... | Answered on Mar 26, 2012 | 124 views

Yes! there is a fuse located inside the set on the main board, make sure your the set is unplugged before you remove the back cover, next follow the 12volt line cord to the main circuit board, there should be a small gma glass fuse right where the wire is. Check the polarity of the 12volt cord to make sure it will work.

Orion TVDVD092 9... | Answered on Dec 19, 2010 | 112 views

Please try and use your AV input or play the DVD inthe combo to see if there is a perrfect picture.
If so the Tuner module is faulty and may need a replacement.
This can be confirmed if you can take a final voltage check to see if the tunerr receives the +12 necessary for the functioning . If not the regulator can be faulty.
The tuner must be replaced with the same type pin configutation , must be taklen out of the board witth good carre so as not to damage the PCB and resoldered.
make sure your cable input lines are good and there is no short in the splitters coming to your house in case your are using community cable.

Orion TVDVD092 9... | Answered on Sep 14, 2010 | 76 views

A 5amp fuse should be ok in the 12v adapter if you are bying a new lead make certain you by the correct one as some leads have the center pin + and some have center pin - look on the set by the power input plug to find out the one you require, regards windyhouse

Orion TVDVD092 9... | Answered on May 17, 2010 | 125 views

The plastics proper Warp,my only suggestion to u is take hair open high heat,tries get it hot enough and force it down.

Orion TVDVD092 9... | Answered on Oct 22, 2009 | 86 views

There is another method for locating the codes for the device you wish to control. Although I do not know the specific remote model you have it should work. First though try any of the codes listed here that you have not already tried.
0002, 0179, 0184, 0209, 0236, 0463, 0479, 1479

On a majority of the Comcast remotes you have to follow special instructions for setting up combo devices.
For your TV/DVD.
  • Turn the device on and insert a DVD
  • On the remote press the DVD button once, then press and hold the Setup button until it blinks twice.
  • If you didn't insert the DVD into the player the first time you tried your codes, retry those as well. The most common code for your device is 0236
  • If you entered the code in correctly the DVD button should blink twice if not try it again.
You may also need to enter a separate code for controlling the TV for volume control.
If you still have not found a code that works then use this method to search the stored memory for codes.
  • Turn on the device.
  • On the remote press the corresponding Device key and it should blink once.
  • Press and hold the Setup key until the Device key blinks twice.
  • Now enter 991 on the key pad and the Device key should blink twice.
  • Aim the remote at the Device and press the Power button once.
  • Now press and release the Channel + button continuously until the device turns off.
  • Press the Power button and the devise should turn back on.
  • If the device does not turn back on then press the Channel - until it does.
  • To lock the code press the Setup button.

Again since I am unsure of which model remote you have there is a slight variation to this with other models.
Instead of pressing the Channel+ to scroll through the codes you need to alternate between the Power button and TV button.

If you still are no closer to relaxing while watching a DVD. You may want to consider programing the TV/DVD as separate devices.
All this seems like a real pain so good luck.
I hope this helps, but if not respond with the remote model# and maybe I can do more with that.

Orion TVDVD092 9... | Answered on Oct 02, 2009 | 547 views

please try reset if still doesn't work then your dvd having the lasor defective. Need replace the whole lasor set with housing.

Orion TVDVD092 9... | Answered on Sep 04, 2009 | 353 views

try just punching the numbers in, they should stay in the memory if a station is there

Orion TVDVD092 9... | Answered on Jul 16, 2009 | 105 views

please let me know when you find out!!!

Orion TVDVD092 9... | Answered on Jun 30, 2009 | 194 views

I'm sorry, but the TVDVD092 is not digital.

Orion TVDVD092 9... | Answered on Jan 01, 2009 | 173 views

I'm sorry, but there is no access to the menu without a remote. If you want to try a universal remote, try the codes listed for Orion, Emerson, and Sansui.

Orion TVDVD092 9... | Answered on Nov 11, 2008 | 789 views

did you find your remote? i'm trying to get my orion tv to go into aux mode without a remote. do you know how to do that?

Orion TVDVD092 9... | Answered on Sep 29, 2008 | 699 views

Manufacturer's Phone Number may be 800-289-0980. Not sure if this is the manufacturer number, but it is the number listed on the Orion TVDVD092 box to call if you still have questions after reading the manual. I need a manual as well. I do hope that they will send me one.

Orion TVDVD092 9... | Answered on Aug 23, 2008 | 465 views

Try 1234 or 0000 on keypad....accordianman

Orion TVDVD092 9... | Answered on Jul 14, 2008 | 75 views

Hi Beth,

The remote that I have for this tv has part number 076R0HE04B on the back. If you google it you should get some results to buy a replacement.

Hope this helps,


Orion TVDVD092 9... | Answered on Nov 01, 2008 | 310 views

Not finding what you are looking for?
Orion TVDVD092 9 in. TV/DVD Combo Logo

52 questions posted

Ask a Question

Usually answered in minutes!

Top Orion Televison & Video Experts

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

The Knight
The Knight

Level 3 Expert

76099 Answers


Level 3 Expert

5686 Answers

Are you an Orion Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides