my sampo PME-42S6 ha trouble powering on. It will start (blue screen and hour glass appear the turns...
(More)
my sampo PME-42S6 ha trouble powering on. It will start (blue screen and hour glass appear the turns off after a second or two. Other times it will stay on the blue screen indefinetly. Any thoughts?
we have had our tv 4 about 7 years and over the past few months it has been going red! basically if...
(More)
we have had our tv 4 about 7 years and over the past few months it has been going red! basically if ther is anything red on a tv program the whole picture goes red.it used 2 happen a few times a week now it happens every 10mins or so! cant afford 2 get a new tv so if any1 has any advice that cud help that wud b gr8!
The T.V has all sorts of pink lines and other distortions on the screen if you hit the side of it,...
(More)
The T.V has all sorts of pink lines and other distortions on the screen if you hit the side of it, it becomes crystal clear for a few hours is the video card going bad?
My tv was fine yesterday. Turned it on today and the screen is full of vertical lines and the color...
(More)
My tv was fine yesterday. Turned it on today and the screen is full of vertical lines and the color fades in and out. Think this is fixable?
I have a Sampo PME-50XS6 that has a shimmering effect uniformly accross the screen once signal from...
(More)
I have a Sampo PME-50XS6 that has a shimmering effect uniformly accross the screen once signal from any source is available. This does not mean an image is necessarily being displayed. This occurs when a connected playing device powers up. The display panel is without these shimmers until some electrical signal from the playing device is present. Once you start playing a video, the shimmering is still there but not as noticeable due to the luminosity of the images. If you are playing a very dark scene something like what you see in many of the Harry Potter movies, you have alot of "noise" in the low luminosity frames. This causes overall poor picture clarity and color realism. I notied that when the playing device is not sending signal during it's power up start up phase, that there is no noise coming from the Sampo Plasma, once the playing device has powered up and is sending no video, yet is sending signal; a slight buzzing noise can be heard from the speakers of the Sampo Plasma. This condition is not islated to any one playing device as I said earlier. I would love to get this resolved. I am a technical enthusiast and I am capable of electronic troubleshooting on my own. THANKS! In advance for your help. Tony South Carolina
I can see thru the ventilation holes that a green light is on. Other submitters seem to think the...
(More)
I can see thru the ventilation holes that a green light is on. Other submitters seem to think the problem is in the relays on the power board. The problem I have encountered is I can[t find the secret to getting the back off of the set. specifically the legs are fastened in some way that won't release the back. Any help???
sampo plasma tv stopped working ,the green power light comes on but nothing shows up there is power...
(More)
sampo plasma tv stopped working ,the green power light comes on but nothing shows up there is power button for reset but it work either
12 years old...
(More)
12 years old TV . only blue & green appears , red colour does not appear. while shifting
the TV with the home from one place to another , we cleaned the Tv with
wet cloth . it seems that some drops of water fell over the PCB attached with the picture tube @ the backside. after this when swicthed on the TV
there is no appearnce of red colour . pl. confirm what will be the problem and how this will be rectified.
chanda cbe.
samsung TV - red colour problem . 12 year old . while cleaning with wet cloth some water...
(More)
samsung TV - red colour problem . 12 year old . while cleaning with wet cloth some water drops fell over the PCB attached to picture tube . pl. confirm what will be the problem ?
I bought my unit many years ago (early adopter) without the optional tuner. It has always worked...
(More)
I bought my unit many years ago (early adopter) without the optional tuner. It has always worked very well. I like it because of all the different types of connectors and I use it as monitor with a multimedia computer. Recently, it has developed a problem: The cleaning ladies apparently used some cleaner on the screen that stripped a very thin coating from the glass that apparently was there to dissipate the heat coming from the screen. After a few minutes being on, the set starts to pixalate and it looks as if the the colors are misaligned vertically. First, you see a yellow fringe around objects, then a pinkish ghost to the right of the yellow. After a while, the picture is unwatchable. If I stick a fan to blow on the screen, the problem will not happen. Is there some sort of repair for this, possibly re-spraying a new coating? I don't know if this is related, but when I call the menu, it jumps around (flickers) so much I can barely read it. Has anyone experienced the same problem? Thanks. jmartin12
The Sampo has a picture but no green tint. color range from red to blue no green. It has a lot of...
(More)
The Sampo has a picture but no green tint. color range from red to blue no green. It has a lot of vertical dancing pixel lines usually blak. Looks like the pixels trying to refresh with a color missing. It has 1 horizontal line across the dead center. This line is pixel width not fat. What boards to replace?
Will the side mount speakers that fit the Sampo 42" Plasma PME-42V8 also fit the Sampo 42"...
(More)
Will the side mount speakers that fit the Sampo 42" Plasma PME-42V8 also fit the Sampo 42" Plasma PME-42S6 ?