20 Most Recent Aqua -Vu Perch Underwater Camera with 100-Ft. Cord GPS Receiver Questions & Answers


i was having the same prob. so i cut the male conector part off the the camera cord and cut like 4" of the black cord part off to expose the wires. there will be 4 colored wires and 1 bare wire cut the bare wire off as close as you can to where you stripped off the black part, then expose the top inch of each color wire. OK now open up the back of the monitor, take the black female connector off you dont need it. you will see a 4 prong female connector part inside cut that off too, then conect the wires black - black / yellow - white / red - orange (i think it was orange) / blue - green . it sounds kinda complicated, but really easy, and now it works great! make sure you use electrical tape or something over bare wires

Aqua -Vu Perch... | Answered on Mar 05, 2011


i figgured out how to fix it. i was having the same prob. so i cut the male conector part off the the camera cord and cut like 4" of the black cord part off to expose the wires. there will be 4 colored wires and 1 bare wire cut the bare wire off as close as you can to where you stripped off the black part, then expose the top inch of each color wire. OK now open up the back of the monitor, take the black female connector off you dont need it. you will see a 4 prong female connector part inside cut that off too, then conect the wires black - black / yellow - white / red - orange (i think it was orange) / blue - green . it sounds kinda complicated, but really easy, and now it works great! make sure you use electrical tape or something over bare wires

Aqua -Vu Perch... | Answered on Jan 25, 2011


mike if you are still having this problem, i figgured out how to fix it. i was having the same prob. so i cut the male conector part off the the camera cord and cut like 4" of the black cord part off to expose the wires. there will be 4 colored wires and 1 bare wire cut the bare wire off as close as you can to where you stripped off the black part, then expose the top inch of each color wire. OK now open up the back of the monitor, take the black female connector off you dont need it. you will see a 4 prong female connector part inside cut that off too, then conect the wires black - black / yellow - white / red - orange (i think it was orange) / blue - green . it sounds kinda complicated, but really easy, and now it works great! make sure you use electrical tape or something over bare wires

Aqua GPS | Answered on Jan 25, 2011


  • Defective battery
  • Defective charger

GPS | Answered 19 hours ago

Not finding what you are looking for?
GPS Logo

15 questions posted

Ask a Question

Usually answered in minutes!

Top Aqua GPS Experts

Marvin
Marvin

Level 3 Expert

82208 Answers

Will Halftowaite

Level 3 Expert

508 Answers

The Knight
The Knight

Level 3 Expert

75846 Answers

Are you an Aqua GPS Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Aqua GPS

  • Aqua GPS

Most Popular Question

experiancing probems

  • GPS
Loading...