20 Most Recent Timex Atlantis 100 77517 Wrist Watch Questions & Answers


On this link you can see how to resize and remove the watch band.
You need some tools.

Resize your Watch Band and Remove Links with Basic Tools

Timex Atlantis... | Answered on Jul 21, 2014


it automatically set to default ?
this might be that the buttons stuck to the casing, better to see a rep and loosen them up a bit.

Timex Atlantis... | Answered on Dec 13, 2010


I found it on Wike Answers! Thanks Jan

Timex Atlantis... | Answered on Jul 27, 2010


Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all TIMEX watch manuals. Rate me, please .

Timex Atlantis... | Answered on Apr 07, 2010


Sound like returning it to the makers service center is required.

Take it to your local Timex shop for repair.

Timex Atlantis... | Answered on Feb 26, 2010


Read in My tips and tricks how to remove the links.

Timex Atlantis... | Answered on Jan 25, 2010


Most bands have removable links on the end of the band. You can tell because they have small holes on the side to remove the pins that hold them together. The links that don't have holes are not removable. This is standard on most metal bands.

Timex Atlantis... | Answered on May 17, 2009


Set chime and Alarm on or off

Press MODE to select ALARM
Press START/SPLIT to change (clock sign and chime sign will appear and disappear as you keep on pressing).
Press MODE again and you are all set.

Timex Atlantis... | Answered on Jan 05, 2009


Contact Timex https://www.timex.com/watch-manuals.html For any questions or support click here or call
1.888.727.2931 Mon to Fri
4am - 7pm EST

https://www.timex.com/watch-manuals.html

Timex Watches | Answered on Oct 14, 2018


Timex Helix ABT.
This watch calculates altitude by measuring air pressure and relating that value to the international standard atmosphere. 1013.25 mb = 0 metres.
The Timex ABT does not display negative altitude values. So if the measured air pressure is greater than 1013.25 mb and the altimeter is reset (select altimeter, pull out the crown 1 click and press and hold the lower left button) the watch will display LO. You can experiment with this. Wait till the barometer reads 1013 or 1012 and reset the altimeter. The watch will display zero or maybe 5 metres. Or wait till the pressure goes up to, say, 1022 and reset the altimeter. The watch will read LO again. If this happens alot, you probably live fairly close to sea level. What you can do to trick the watch is use a vacuum cleaner to raise the perceived altitude of the watch then calibrate the altimeter (pull out and rotate the crown) and change the altimeter reading to, say, 200 metres. It wont read LO then. Keep an eye on it and the atmospheric pressure. If the pressure starts to rise then adjust the altimeter accordingly. Remember this watch is designed to measure proper altitudes where the air pressure isnt likely to be as high as 1013.25. If you are mooching around near sea level the naturally changing air pressure will often make the watch read LO.
If you live up in Montana at 1500 metres (ISA standard pressure about 840 mb) all the time then the watch will always read a positive value and you can calibrate it from reference to a map or road sign etc. The atmospheric pressure will unlikely reach as high as 1013 up there and the watch wont read LO.

Timex Watches | Answered on Oct 10, 2018

Not finding what you are looking for?
Timex Atlantis 100 77517 Wrist Watch Logo

15 questions posted

Ask a Question

Usually answered in minutes!

Top Timex Watches Experts

Ross Keen

Level 3 Expert

1328 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1689 Answers

Dustin
Dustin

Level 3 Expert

350 Answers

Are you a Timex Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Timex Watches

  • Timex Watches

Most Popular Question

get alarm off

  • Watches
Loading...