Royal 112MX Shredder - Answered Questions & Fixed issues
It usually does not sense
Try cleaning the "eyes" in the middle where you insert the paper, they may just be dusty/dirty.
6/18/2011 1:22:31 AM •
Royal 112MX...
•
Answered
on Jun 18, 2011
•
204 views
My royal 112mx shredder doesn't shut off
Unplug the shredder. Either blow with canned air or take a small paintbrush and clean the sensors where you put the paper in. There is one above and one below in the center of the slot.
3/8/2011 1:32:10 AM •
Royal 112MX...
•
Answered
on Mar 08, 2011
•
465 views
My royal shredder will shred paper just fine but
Silly question if it shreds paper fine but....when did you last oil the machine.???
Cross cut shredders need to be regularly oiled..( pour some shredder oil across the cutting blades).
It may just be that the credit card is too thick!
1/30/2011 12:07:57 AM •
Royal 112MX...
•
Answered
on Jan 30, 2011
•
388 views
Royal 112mx schredder has power,
From what you describe it sounds like the "eyes" work ok because you hear the click of the relay inside but if it dosnt run then its likely the pcb inside is "pooched"...contact Royal at 1-800-524-0799 for parts assistance.
11/19/2010 2:31:28 PM •
Royal 112MX...
•
Answered
on Nov 19, 2010
•
412 views
Where can I get a Manual for a Royal Scriptor ll Typewriter?
You can try searching for a manual for the Royal Scriptor II typewriter on the manufacturer's website or on websites that specialize in providing manuals and instructions for various products. Additionally, you may be able to find a digital copy of the manual on online marketplaces or auction websites, such as eBay or Amazon. If you are unable to find a manual online, you can try contacting Royal's customer support for assistance in obtaining one.
2/27/2023 8:39:43 AM •
Royal Office...
•
Answered
on Feb 27, 2023
•
115 views
Royal AX160 advances paper at an angle why?
Hi,
you might need to calibrate a part of the typewriter in order to fix this or there might be broken part of the typewriter.
Please verify how the paper should be advanced based on the typewriter manual. And if it's different in the manual, then you might need to call Royal directly to ask for the closest repair shop you can send the typewriter to so that the issue can be fixed.
Thank you.
11/16/2022 12:33:43 AM •
Royal Office...
•
Answered
on Nov 16, 2022
•
40 views
What's a PCB on a Royal 1212X shredder? And how do I know the PCB is the problem?
A pcb is a printed circuit board. You can visually check it for very small burn spots or tiny melted disconnections, or swollen or burst capacitors; but any repairs of the PCB are risky because of the interdependencies of any circuitry.
If you've already checked the mechanical workings, you might try to find a replacement PCB if you're convinced that's the problem. They're often not even sold, so a whole new unit would be required.
Welcome to the wonderful world of planned obsolescence.
2/8/2022 3:18:52 AM •
Royal Office...
•
Answered
on Feb 08, 2022
•
270 views
Not finding what you are looking for?