20 Most Recent
Questions & Answers
I was whatching my daughters dog while she was
I was able to catch a glimpse of the back of this unit. I cannot tell by the picture but it is either a RJ11 connector or RJ45 Connector. RJ 11 is the connector on your landline phones and RJ45 connectors are used in computer networking applications. If you have either of these cable laying around you can verify which is which, after that if you do not want to buy the crimp tool for these connectors I would suggest sacrifice whichever cable it ends up being (RJ11 or RJ45) and splice your speaker wire to the two active leads, + and -. Good luck!
on Jul 19, 2011
How can I set up
I can't find any details or even a picture of the rear panel but if it has a digital input attach the source of that HBO movie (cable/sat box) digitally to the Durabrand just as you would any other digital source.
on May 07, 2011
How to hook up cable box, dvd player, and tv, to
things you'll need:
Place the front left and right speakers on each side of the TV with the speaker labeled "Center" either above or below the TV screen. Set the rear speakers behind the seating area at head level and place the subwoofer on the floor a few inches away from the wall, which can absorb bass sounds if the sub is pressed against it.
Connect the plug on the end of each speaker to the jack labeled for that speaker on the back of the Durabrand receiver. The cables are permanently attached to the speakers, so each may need to be moved closer to the receiver. For example, the left front speaker connects to the jack on the receiver labeled "LF."
Plug the video cable from the Video OUT jack on the back of the receiver to a Video Input jack on the back of the TV.
Plug in the Durabrand receiver and TV to the electricity and switch on both components.
Press the "Input" button on the TV remote several times until the Durabrand signal displays on the screen.
on Mar 25, 2011
Not finding what you are looking for?