20 Most Recent
Janome Memory Craft 5700 - Page 9 Questions & Answers
My thread keeps breaking on my janome 1600p-dbx sewing machine. I have changed my needle, just had it serviced but i can only free motion quilt about 6" before the thread breaks. What can I do?
- Check the thread tension: Make sure the upper thread tension is set correctly for the type of fabric and thread you are using. If the tension is too tight, it can cause the thread to break.
- Check the thread path: Make sure the thread is correctly threaded through the machine and there are no tangles or knots in the thread path.
- Check the bobbin tension: Make sure the bobbin tension is set correctly. If the bobbin tension is too tight or too loose, it can cause thread breakage.
- Use the correct needle: Make sure you are using the correct size and type of needle for the fabric and thread you are using. Using a damaged or bent needle can also cause thread breakage.
- Slow down your stitching speed: If you are stitching too quickly, it can cause the thread to break. Try reducing your stitching speed to see if this helps.
- Use high-quality thread: Make sure you are using high-quality thread that is suitable for your project. Poor-quality thread can be more prone to breakage.
I have a Janome 1600P DBX sewing machine. I just had it serviced, I changed the needle but the top thread keeps shredding and breaking at the throat plate. What else can I do?
- Check the thread: Make sure you are using a good quality thread that is appropriate for the type of fabric you are sewing. Poor quality thread or thread that is not suitable for the fabric can cause shredding and breaking.
- Check the needle: Make sure you are using the correct size and type of needle for the fabric you are sewing. A bent or damaged needle can also cause thread shredding and breaking.
- Check the tension: Check the upper thread tension to make sure it is set correctly for the type of fabric you are sewing. If the tension is too tight, it can cause the thread to shred or break.
- Check the threading: Make sure the upper thread is threaded correctly and that there are no tangles or knots in the thread path.
- Check the presser foot: Make sure the presser foot is properly installed and that the fabric is being held firmly in place while you sew.
- Check the machine settings: Double-check that the machine is set to the correct stitch length, stitch width, and other settings for the type of fabric you are sewing.
If you have tried these steps and are still experiencing issues, you may want to consult with the technician who serviced your machine
How do I reset my Janome Jem Platinum after getting a co error code? It won't sew at all currently.
If your Janome Jem Platinum sewing machine is displaying an "CO" error code, it means that the machine's needle bar is obstructed and cannot move up and down properly. To resolve this issue, you can try the following steps:
- Turn off the machine and unplug it from the power source.
- Open the needle plate and inspect the area around the needle bar to see if there is any thread, fabric, or other material
I have a Janome 500e.When I use my printer cable type direct there is no embroidery file and nothing is transferred only if i use a usb stick .
It sounds like the issue you're encountering may be related to the way you are trying to transfer your embroidery files to your Janome 500e sewing machine.
To transfer files using a printer cable type direct, you would typically need to use a specific software or driver to communicate between the computer and the machine. If you are not able to transfer files in this manner, it might be necessary to check with the manufacturer or vendor of the cable to see if they can provide assistance or additional information.
In the meantime, it seems that you have found a workaround by transferring your files to a USB stick, which you can then use to transfer the files directly to the machine. This is a common method for transferring files to many types of sewing machines.
If you continue to have trouble transferring files using a printer cable type direct, you may want to consider reaching out to Janome's customer support for further assistance.
Not finding what you are looking for?