20 Most Recent Janome Memory Craft 9000 Computerized Sewing Machine - Page 4 Questions & Answers

A setting change while you are sewing should not happen. Sounds like you will have to take your machine in for service.

Janome Memory... | Answered on Apr 15, 2015

Duh. It was the breaker. Always check the breaker ...especially around Xmas!

Janome Memory... | Answered on Mar 30, 2015

check there,s not something blocking the carriage e.g a pin , clean all round carefully and make sure it has room to move correctly.

Janome Memory... | Answered on Mar 24, 2015

Hi Janice,

Most likely a fuse in the transformer blew.
A technician needs to see the machine to fix it.

hope that helps!

Janome Memory... | Answered on Mar 15, 2015

What size lettering are you using? You can try smaller lettering or a larger hoop.
also try going to edit then clear.

Janome Memory... | Answered on Mar 07, 2015

If this is happening during embroidery, please make sure the presser foot is in the down position. With the embroidery foot on, it's sometimes hard to tell.
The check spring in your upper tension may be bad. You won't be able to fix it yourself. Take it in to your local repair shop.
The last option is to remove the needle plate and bobbin case. Turn the screw on the front 1/4 turn to the left, no more. If this doesn't help, leave it alone and take it in to the shop.

Janome Memory... | Answered on Mar 05, 2015

I'm pretty sure you just swing open the lamp cover and the bulb will be right there. It just pulls out.
This is a halogen bulb and will be spendy (over $20).

Janome Memory... | Answered on Feb 28, 2015

If it squeaks when you are embroidering and not when you are sewing, it's the belts on the embroidery unit. From use, they can become glazed, slick and then they squeak.

If it squeaks when you are doing either, it's more than likely an internal lubrication of the machine that needs to be done by a trained technician.

Embroidery Services
San Diego, CA

Janome Memory... | Answered on Feb 26, 2015

Your machine is a "computer" and needs a qualified Janome repair tech.

Janome Memory... | Answered on Feb 22, 2015

Hello Hazel
The Memory Craft 9000 is a computerized sewing machine. In removing the casing precautions must be taken to prevent damage to the electronic boards which are costly to replace. As a result it is recommended by the manufacturer (Janome) that this work be performed only by qualified technicians with the required equipment to prevent any damage.
What is the reason for requiring the casing to be removed?

Janome Memory... | Answered on Feb 16, 2015

can you explain more about the noise it is making ? maybe something is caught some where else

Janome Memory... | Answered on Feb 16, 2015

sure you can trade it in but you would be better off selling your self the dealer may give 200.00 for it if you buy a new one from him

Janome Memory... | Answered on Feb 03, 2015

Electronic at times, when they set up for a long time go bad, especially when packed away. Camera's are known for it. Take it to a shop before making any decisions about it. It could be a simple cap that needs replacing.

Janome Memory... | Answered on Jan 29, 2015

Tension depends on so many things. Material thickness, right size needle, thread,bobbin etc . If it is none of these things then you need a technician.Best wishes

Janome Memory... | Answered on Jan 26, 2015

You need to adjust the screen. Turn the machine off. Press simultaneously the three buttons on the front (Start, reverse and stop) at the same time turn the machine on.

Press the crosses that appear on the screen and it should all be fine.

Janome Memory... | Answered on Dec 21, 2014

Unfortunately you are probably not going to be able to fix this.
It needs a sensor adjusted (probably), or a component replaced.

Janome Memory... | Answered on Nov 26, 2014

Not finding what you are looking for?
Janome Memory Craft 9000 Computerized Sewing Machine Logo

741 questions posted

Ask a Question

Usually answered in minutes!

Top Janome Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1134 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

220 Answers

Irene Tulloch

Level 2 Expert

491 Answers

Are you a Janome Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Janome Sewing Machines

  • Janome Sewing Machines

Most Popular Question

when move needle 4 0 or 4 5 needle now

  • Sewing Machines