http://www.fixya.com/support/p130930-bellsouth_bell_south_14_channel_two_waySolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comThu, 10 Dec 2009 02:55:10 GMT80http://www.fixya.com/support/t2078159-used_bellsouth_model_1008_two_wayI haven't used my Bellsouth model 1008 two way radios for a long time....I just replace the batteries and turned them on but they are not in sink with eachother. How do I get them to transmit and receive with each other?Thu, 10 Dec 2009 02:55:10 GMThttp://www.fixya.com/support/t421722-bellsouth_communicator_model_2276I have a pair of cheaper walkie talkies made by Bellsouth -- one of the hand helds is in constant transmit mode and I can find nothing about how to get it out of it!!! We have used these before - and never had this problem! Any help would be greatly...Thu, 10 Dec 2009 02:55:10 GMThttp://www.fixya.com/support/t13399-problem_radio_beeps_shuts_off_helpmy problem is: the Radio beeps then shuts off, can you help?Thu, 10 Dec 2009 02:55:10 GMThttp://www.fixya.com/support/t148281-icom_ic_f11battery is fully charged, but radio constantly beeps and light flashes red then green. Even if battery is charged overnight problem continues. Any advice would be appreciated.Thu, 10 Dec 2009 02:55:10 GMThttp://www.fixya.com/support/t1804465-icom_ic_a6_feedback_type_interferenceI have an ICOM VHF air band IC-A6 utilising a Headset adaptor, OPC-499, with a PTT and a David Clark Headset. This setup has been working fine until recently when it started producing a feedback like squeal on PTT which is also transmitted over the...Thu, 10 Dec 2009 02:55:10 GMThttp://www.fixya.com/support/t2122805-need_get_users_manual_bell_south_two_wayneed users and accesories manual for model 2290 two way where can i get this download or elsewhereThu, 10 Dec 2009 02:55:10 GMThttp://www.fixya.com/support/t310007-midland_70_340a_2_ways_vhf_radioMy radio receives very well on the pre-programmed 40 CH but in Tx it make a tic-tic sound at regular intervals (repeiting sound) on all the channel and when I press the button on the Mic. What is that..? GabThu, 10 Dec 2009 02:55:10 GMThttp://www.fixya.com/support/t709631-motorola_xtnidI have several of the new Motorola XTNiD's and a couple of the non display XTNi which, when switched on, make no sound but the red TX light comes on and stays on. No Audio or TX output. This seems to be a error code, has anyone else had this problem...Thu, 10 Dec 2009 02:55:10 GMThttp://www.fixya.com/support/t1393425-kenwood_ts_820s_almost_deadMy neighbor was going to throw away a Kenwood 820s- but ofcourse i managed to resque it. Its a beutiful rig-but it has a problem- the only things working is the fan and the-s-meter light. I have checked all the solderings, contacts,plugs over and...Thu, 10 Dec 2009 02:55:10 GMThttp://www.fixya.com/support/t266059-cobra_model_hh35_radio_dummy_batteriesI have two of these radios without the dummy batteries. I would like to use them without purchasing the NiCad batteries. The owner manual says I will need the dummy batteries when using regular AA batteries. MY QUESTIONS ARE: 1. WHERE CAN I PURCHASE...Thu, 10 Dec 2009 02:55:10 GMThttp://www.fixya.com/support/t278393-philips_fm92_cb_radioI have just purchased this radio and it has two red wires for power. One red wire has a black marking but both wires have fuse holders on them. I am assuming the red with the black marking is negative and the straight red wire is Positive when...Thu, 10 Dec 2009 02:55:10 GMThttp://www.fixya.com/support/t443015-telcom_te_150Just a couple these without instructions, thought it would be quite easy - NOT! I can't find anything on web for manual download. I've set to same channels and tried vox too, obviously I don't know what I'm doing. Any help appreciated as my 7 year...Thu, 10 Dec 2009 02:55:10 GMThttp://www.fixya.com/support/t765059-operating_yaesu_ft_767_gxI am very new to ham radio,(call sign M3ENX United Kingdom,and I bought a used Yaesu FT-767 GX Radio,but no manual was available with it. I have no idea how to use it,so if you could just explain where I can find the "clutch" "Brake" and...Thu, 10 Dec 2009 02:55:10 GMThttp://www.fixya.com/support/t391071-service_manualgm338 two way radioThu, 10 Dec 2009 02:55:10 GMThttp://www.fixya.com/support/t13397-radio_transmit_not_receive_firendsmy Radio transmit and not receive and my firend's receive and not transmit, what can we do?Thu, 10 Dec 2009 02:55:10 GMThttp://www.fixya.com/support/t343543-unlock_dealer_codei would like to add some frequency codes to my vhf radioThu, 10 Dec 2009 02:55:10 GMThttp://www.fixya.com/support/t352153-icom_ic_f21_400_430mhz_programmingWhen I program my radio using CS-F11 software, i get a warning message (error message). And the TX and RX LED indicator are blinking alternately. Please advise...Thu, 10 Dec 2009 02:55:10 GMThttp://www.fixya.com/support/t359177-radio_shack_pro_433I'am looking for programing software for the Radio Shack pro-433 scanner that will work or has drivers for the new VISTA operating system?Thu, 10 Dec 2009 02:55:10 GMThttp://www.fixya.com/support/t278647-rechargeable_batteriesI need to locate batteries for the following item: Columbia Communications 22 channel 2 way radios # GM3W-SVP.They look like a plastic wrap of 5 AAAs. Thanks in advance for any help.Thu, 10 Dec 2009 02:55:10 GMThttp://www.fixya.com/support/t279457-user_manualI need a user manual for a motorola t8530r walkieThu, 10 Dec 2009 02:55:10 GMThttp://www.fixya.com/support/t451137-raytheon_80_vhfI have a old Raytheon 80 VHF I would like to put back into use. Ican not locate the two prong power connector for it. Can youhelp? Wayne WilliamsThu, 10 Dec 2009 02:55:10 GMThttp://www.fixya.com/support/t522765-kenwood_tk100I have 3 radio's that when you push xmt. switch, you get a noise on other radio's but no speach........Thu, 10 Dec 2009 02:55:10 GMThttp://www.fixya.com/support/t547587-kenwood_ts_450s_cannot_tune_no_pttMy Kenwood TS-450s gives a cw error code of "CHEC" when my AT-TUNE button is pressed. The atu won't activate and nothing happens when I depress my PTT. Fault occurred suddenly. Regards DougThu, 10 Dec 2009 02:55:10 GMThttp://www.fixya.com/support/t416163-kenwood_vhf_portable_th_234My Kenwood portable VHF radio TH 234 got busted. the regulator and a diode is a suspect but my question, is it possible that the CPU got affected? how can we verify? can I ask technical support like schematic diagram? Please help me. ThanksThu, 10 Dec 2009 02:55:10 GMThttp://www.fixya.com/support/t652203-no_recieve_virgin_cobra_142_gtlhello, i have a new old stock cobra 142 base, i hooked it up and it worked great, i used it for a few mins, checked to see if sideband was on freq, and i lost recieve," i see recieve on meter," i get transmit, and no its not on pa, it also gets no...Thu, 10 Dec 2009 02:55:10 GMT