http://www.fixya.com/support/p129701-ge_wbse2090a_top_load_washerSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comMon, 14 Dec 2009 20:46:43 GMT80http://www.fixya.com/support/t3546996-fills_agitates_normal_before_rinsingFills and agitates normal. Before rinsing, washer enters a slow agitation cycle at which time the clutch begins to engage and disengage making a load banging sound. It does the same for the rinse cycle.Mon, 14 Dec 2009 20:46:43 GMThttp://www.fixya.com/support/t3206502-tighten_drum_ge_washerhow do you tighten a drum on a ge washerMon, 14 Dec 2009 20:46:43 GMThttp://www.fixya.com/support/t3298977-wcsr2070t2ww_ge_will_not_agitateI have a wcsr2070t2ww (GE) that will not agitate. it will spin, drain, and make noise during agitation cycle but no movement. any ideas?Mon, 14 Dec 2009 20:46:43 GMThttp://www.fixya.com/support/t3329617-washer_will_only_spin_vey_light_load_butwasher will only spin with vey light load but seems to agitate just fineMon, 14 Dec 2009 20:46:43 GMThttp://www.fixya.com/support/t3337477-made_quite_hum_during_spin_cycleIt made a quite hum during the spin cycle, instead of the normal (much louder) spinning sound. When I turned it off I noticed it had a rubber/electric burning smell.Mon, 14 Dec 2009 20:46:43 GMThttp://www.fixya.com/support/t3320334-washer_goes_half_way_wash_startsWasher goes half way through wash and starts clicking. Motor will go into overload. When turned to manual spinn will click but spin slow. Switching to another cycle will sometimes start it working. In field service mode. Reports error code slow pump...Mon, 14 Dec 2009 20:46:43 GMThttp://www.fixya.com/support/t2881726-wont_spinmachine not spinning and making humming noise almost all the water drains but clothes still very wet and wont spinMon, 14 Dec 2009 20:46:43 GMThttp://www.fixya.com/support/t2871037-water_not_come_out_spout_duringwater does not come out spout during agitating cycle (wash or rinse). GE washer about 1980Mon, 14 Dec 2009 20:46:43 GMThttp://www.fixya.com/support/t2592357-grease_leaking_under_ge_washerWhat can be done to stop grease from leaking from under the machine?Mon, 14 Dec 2009 20:46:43 GMThttp://www.fixya.com/support/t2428793-maytag_top_loader_washer_spin_butMy maytag top loader washer won't spin but agitates,what is the problemMon, 14 Dec 2009 20:46:43 GMThttp://www.fixya.com/support/t2466794-washer_shuts_off_between_wash_cycleIt will start washing then it stops before it even drains water or rinse cycle and want come on in those cyclesMon, 14 Dec 2009 20:46:43 GMThttp://www.fixya.com/support/t2420637-ge_washer_m_wjre5500g1ww_will_not_fillge washer M#: wjre5500g1ww will not fillMon, 14 Dec 2009 20:46:43 GMThttp://www.fixya.com/support/t2398406-machine_not_stop_filling_upI changed the sensor, the pressure switch water level. If I press the star button, the machine starts filling up and only stops when I press agian the star buttonMon, 14 Dec 2009 20:46:43 GMThttp://www.fixya.com/support/t2357694-overflowMy GE WDSR2080DAWW washer fills with water, but doesn't shut off when the desired water level is reached. The water eventually starts coming out of the bottom of the washer and floods the floor.Mon, 14 Dec 2009 20:46:43 GMThttp://www.fixya.com/support/t2065629-washer_fill_water_will_only_dropmy washer won't fill with water it will only drop water for like a minute ? and then it will stopMon, 14 Dec 2009 20:46:43 GMThttp://www.fixya.com/support/t2258760-water_will_not_stop_filling_wash_basketI have a ge washer model no. wbse2090a2ww and it wont stop filling up even when unplugged have to close the shutoff valve. even runs through wash cycle and floods over wash basket 0Mon, 14 Dec 2009 20:46:43 GMThttp://www.fixya.com/support/t1119775-ge_washer_leaks_when_let_fill_topIf you set the washer to the highest water setting it leaks water big time out the bottom when it starts agitating. If i drain it down to the next lowest water hieght setting...it doesnt leak. any ideas?Mon, 14 Dec 2009 20:46:43 GMThttp://www.fixya.com/support/t2216860-ge_washer_modelMy GE Washer model # WDSR2080DAWW is overfilling unless I take the hose off the side that controls the load indicator switch and blow air into, once I do that, it will stop filling and work perfectly, how do i fix this problem?Mon, 14 Dec 2009 20:46:43 GMThttp://www.fixya.com/support/t1888086-spin_cycle_very_loudSounds like bad bearing.Mon, 14 Dec 2009 20:46:43 GMThttp://www.fixya.com/support/t1899840-washer_fills_very_slowlywasher fills very slowlyMon, 14 Dec 2009 20:46:43 GMThttp://www.fixya.com/support/t1888239-washer_not_fill_quickly_rinse_cyleSears Kenmore 91701 electric series, Model 417-99170110, Ser # W21711516. All other functions perform normally on this combo laundry center with the exception of the amount of water that enters the unit at the start of the rinse cycle, it only...Mon, 14 Dec 2009 20:46:43 GMThttp://www.fixya.com/support/t1737625-grease_leakMy GE 6 cycle washer, model WWA5600, has grease all under the tub and floor. It looks like it need a new belt. Would that be the reason for all the grease?Mon, 14 Dec 2009 20:46:43 GMThttp://www.fixya.com/support/t1763148-ge_model_number_wdsr2080daww_machineGE model number wdsr2080daww, machine will not agitate. How do you remove agitator?Mon, 14 Dec 2009 20:46:43 GMThttp://www.fixya.com/support/t1055060-electricalWe had a power surge at our house, and now the washer will not function at all. The breaker is fine and power is at the outlett. Can you help me with were to start and what to look for? Thanks, JimMon, 14 Dec 2009 20:46:43 GMThttp://www.fixya.com/support/t1692538-water_not_empty_from_tubwater does not empty from tubMon, 14 Dec 2009 20:46:43 GMThttp://www.fixya.com/support/t124498-spin_agitate_problemI'm having a problem with the spin and agitate cycles on the washer. When it gets to about 6 minutes left in the agitate, the motor starts cycling on and off, the overhead lights are dimming because of a large current draw and it ultimately throws...Mon, 14 Dec 2009 20:46:43 GMThttp://www.fixya.com/support/t1653314-washer_leaking_grease_or_oil_floor_underMy GE washer is leaking a tan colored oil underneath the unit. I suspect it's the gear case leaking. How difficult is it to replace the gasket or seal. I like to fix things and have tools. Thanks for any help.Mon, 14 Dec 2009 20:46:43 GMThttp://www.fixya.com/support/t1642695-ge_top_load_washer_stop_filling_orMy GE Washer model No. WBSE2090A2WW is overfilling - it would have flooded my basement if I hadn't manually switched it to make it drain - at which time the second problem occurred, which is that it just kept spinning and spinning. What could be...Mon, 14 Dec 2009 20:46:43 GMThttp://www.fixya.com/support/t1689141-bleaching_subsequent_loadsI have a bleaching problem. When I run a load of whites with bleach in the bleach receptacle, later loads of colors get bleach spots! Any thoughts on what is going on here? Thanks!Mon, 14 Dec 2009 20:46:43 GMThttp://www.fixya.com/support/t1107100-agitator_spin_motor_not_runningMy problem is that my GE washing machine does not agitate or spin. The belt is good, but I do not know enough to determine whether or not the problem is with the door switch or the motor itself. I looked for an in-line fuse similar to that in a...Mon, 14 Dec 2009 20:46:43 GMT