20 Most Recent GE WBSE2090A Top Load Washer Questions & Answers


Try opening your service valves (water shutoff valves)all the way.

GE WBSE2090A Top... | Answered on Oct 04, 2014


Hello Consumer. We truly apologize for the frustrations you have experienced with your washer. If you would like us to look further into your concerns, please email us directly at Whirlpool_Digital@Whirlpool.com . Please include your name, YouTube User ID, complete contact information, the full physical address where the washing machine is located, along with the model and serial numbers. Sincerely, Andre W.

GE WBSE2090A Top... | Answered on Jul 09, 2014


My washer will not fill with water to the level that I set it on the panel.

GE WBSE2090A Top... | Answered on Jan 26, 2014


If your washing machine was working just fine, and now it won't fill with water or spin, try this first. This is what was wrong with mine, a pressure hose had a clog in the line. First take off the front panal of washer, then connected to the load size dial (small to large load) there will be a clear plastic tube. This tube had what just looked like a stain in it, but in fact it was pluged up and was the whole problem. If the washer already thinks it's full of water, it's not gonna fill or spin..........

GE WBSE2090A Top... | Answered on Jan 26, 2014


Is it SUE or SUD code?
Sud SUDS LOCK (Overdose of detergent detected during the wash cycle) The motor control unit senses a suds lock condition by analyzing the current draw on the drive motor. If "Sud" is displayed a potential suds lock is detected. This may signify a bad pump, an extra heavy load, excessive detergent, or excessive suds.

Potential Causes

• If too much detergent was used, run the unit through a Rinse/ Spin cycle then a Normal cycle without adding any detergent. This should clear the unit of the excess detergent.
• Check the drain hose and make sure it is not plugged or kinked
• Check Wire Harness connections to the Drain Pump, Pressure Switch, and Central Control Unit (CCU)
• Check / Clean Drain Pump Filter of foreign objects
• Check Drain Pump
• Check the Pressure Switch
• Check CCU

GE WBSE2090A Top... | Answered on Dec 06, 2013


THE LID HAS A DOUBLE SWITCH

GE WBSE2090A Top... | Answered on Nov 29, 2013


Hi,

If your washing machine will not fill, only hot or cold will fill or is slow tofill then read these tips. I have covered many of the things that can happen inthese tips...


Washing Machine Problems No Water

Washing Machine Fix Washing Machine No Water

heatman101


dhjd

GE WBSE2090A Top... | Answered on Jul 17, 2013


feel in the back of your outter tub towards the top and chances are you will find a hole ge's love doing this if it is not under warranty you can repair with some JB weld with out replacing the tub

GE WBSE2090A Top... | Answered on Mar 17, 2013

Not finding what you are looking for?
GE WBSE2090A Top Load Washer Logo

142 questions posted

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Marvin
Marvin

Level 3 Expert

84619 Answers

jimorris77

Level 3 Expert

411 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1479 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

GE Washing Machines

  • GE Washing Machines

Most Popular Question

washer fill

  • Washing Machines
Loading...