http://www.fixya.com/support/p129473-ge_dvl223ebww_electric_dryerSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comWed, 09 Dec 2009 21:22:19 GMT80http://www.fixya.com/support/t3489015-dryer_squeaks_loudly_when_runningMy dryer squeaks loudly when running. I have replaced the drum rollers, glides and drum belt. I didn't replace the idler pulley because I couldn't get the bold off. Would the idler pulley be the likely culprit?Wed, 09 Dec 2009 21:22:19 GMThttp://www.fixya.com/support/t3471535-ok_got_ge_dvl223eb1ww_insufficent_heatOk got a GE DVL223EB1WW Heating element is good. Got 240 volts for sure as I know what 240 volts feels like when I got shocked accidentaly. With the drum removed the heater heats up and produces good heat as it is on for almost a minute before it...Wed, 09 Dec 2009 21:22:19 GMThttp://www.fixya.com/support/t3321114-ge_dryer_working_fine_one_loadI HAVE A GE DRYER THAT WAS WORKING FINE ONE LOAD THEN STOPPED HEATING UP ON THE NEXT LOAS.IT TURNS FINE BUT NO HEATWed, 09 Dec 2009 21:22:19 GMThttp://www.fixya.com/support/t3212786-squeeky_wheel_or_belt_top_removedsqueeky wheel or belt. how is top removed ?Wed, 09 Dec 2009 21:22:19 GMThttp://www.fixya.com/support/t2969401-squeeking_takes_long_dryis squeeking and takes long to dryWed, 09 Dec 2009 21:22:19 GMThttp://www.fixya.com/support/t2388483-tub_making_noiseTub making noise. How do I get to the pulley/ belt to oil the thing?Wed, 09 Dec 2009 21:22:19 GMThttp://www.fixya.com/support/t656318-ge_dvl226eb6wwTumbler is locked in position - won"t move. Motor is working but drum will not move. I have a GE Electric Dryer Model# DVL226EB6WW which I could not locate on website. Please advise possible remedy. Thank you for your assistance.Wed, 09 Dec 2009 21:22:19 GMThttp://www.fixya.com/support/t2172135-dryer_shuts_off_after_15_minutes_needsMy GE Profile Dryer Model # DPSQ495ETOWW operates just fine, except that it shuts down after about 15 minutes of drying-no matter what the setting- and needs to cool down I guess for about 10 minutes before it will start back up when I push the...Wed, 09 Dec 2009 21:22:19 GMThttp://www.fixya.com/support/t2166300-ge_dryer_dvl223ebww_hear_buzzing_soundge dryer dvl223ebww hear buzzing sound when trying to start the dryer . dryer will not startWed, 09 Dec 2009 21:22:19 GMThttp://www.fixya.com/support/t1085890-please_helpmy dryer clicks one time when I turn the start button. but will not turn or start. what could this be.Wed, 09 Dec 2009 21:22:19 GMThttp://www.fixya.com/support/t1962666-burning_smell_from_dryerwhen drying clothes there is a burning smellWed, 09 Dec 2009 21:22:19 GMThttp://www.fixya.com/support/t1529699-squeaky_dryer_drum_felt_thing_came_offGE Profile gas dryer. The drum was squeaking and I opened up the top and found this strip of felt that appears to have come off the front of the drum. How do I get to it to replace it? How do I open the front?Wed, 09 Dec 2009 21:22:19 GMThttp://www.fixya.com/support/t1025117-replace_beltHow does the Top or front panels come off?Wed, 09 Dec 2009 21:22:19 GMThttp://www.fixya.com/support/t201969-electric_whirpool_dyrer_wont_runMy electric dryer will work sometimes, and then all of a sudden won't start. It makes a loud humming sound like its trying to get going, but the drum won't turn and it won't heat up. Sometimes, when it is running, it will stop in the middle of the...Wed, 09 Dec 2009 21:22:19 GMThttp://www.fixya.com/support/t205089-whirlpool_awz2303_tumble_dryer_onlyMy tumble dryer only blows cold but the drum rotates. I think this could have happened because the filter was not cleaned for 3-4 loads and; therefore, the dryer may have over-heated. I have looked for some kind of obvious reset switch but can't...Wed, 09 Dec 2009 21:22:19 GMThttp://www.fixya.com/support/t206394-lg_tumble_dryerWill not tumble, can hear motor trying to work and can sometimes get drum going but it will stopWed, 09 Dec 2009 21:22:19 GMThttp://www.fixya.com/support/t210064-tumble_dryerMy tumble dryer still works and turns the clothes but does'nt heat up! Took the back off and can see the heating element but it all looks connected properly and does'nt seem damaged. Will this be expensive to repair?Wed, 09 Dec 2009 21:22:19 GMThttp://www.fixya.com/support/t211684-no_heat_whirlpool_gas_dryerModel: LGR4634JQ0 The gas dryer no longer generates any heat. The motor will turn the drum. The timer is somehow affected, because if the dryer is turned on and left alone, it will tumble indefinitely.Wed, 09 Dec 2009 21:22:19 GMThttp://www.fixya.com/support/t211699-washing_machine_temperatureswhat temperatures are used by the settings on USA washing machines described as cold,warm and hot. The launderette i use in the UK uses USA machines, but the UK instructions on my clothes give temperatures.Wed, 09 Dec 2009 21:22:19 GMThttp://www.fixya.com/support/t211814-gas_only_comes_couple_cyclesI took the panel off the front and cleaned about a 1/2 inch of lint off of the inside. yikes! There was actually a layer that looked like it had been smoldering. I can see the igniter working and for the first two or three cycles the gas comes on...Wed, 09 Dec 2009 21:22:19 GMThttp://www.fixya.com/support/t215254-maytag_dryerI have a maytag dryer model # HYE3657AYW It will not start at all. I checked the circuit breaker. i found no problem their.Wed, 09 Dec 2009 21:22:19 GMThttp://www.fixya.com/support/t216154-whirlpool_calypso_dryer_electricalAfter the dryer has completed a drying cycle, it will not turn back on (after the door has been opened and closed). If the dryer is unplugged for about 15 minutes, it will work again after it is plugged in. Also, the display sometimes comes on by...Wed, 09 Dec 2009 21:22:19 GMThttp://www.fixya.com/support/t218929-no_heathi i'm Darrell i need some help with my kenmore 80 series dryer if gas. i have gas comeing to the dryer but no heat. can u help me?Wed, 09 Dec 2009 21:22:19 GMThttp://www.fixya.com/support/t221289-drive_beltCOULD YOU PLEASE TELL ME IF THE DRIVE BELT IS BROKE WILL THE DRUM STOP TURNINGWed, 09 Dec 2009 21:22:19 GMThttp://www.fixya.com/support/t220664-loose_drum_support_feltI notice that the dryer was making noise with the turning of the drum. I opened up the top of the dryer and found that the felt strip that the drum rides on has come loose. It appears that plastic studs that were used to hold it in place have...Wed, 09 Dec 2009 21:22:19 GMThttp://www.fixya.com/support/t223774-whirlpool_top_loader_drierModel (Uk) 3LER5436EQ1 Not turning on. Power is to the timer/programmer. Theres continuity on the door switch, thermal fuse, and the off/on button.There is no power to the on/off button however. The thermostat on the heater has continuity.There...Wed, 09 Dec 2009 21:22:19 GMThttp://www.fixya.com/support/t226329-dryer_hotpoint_dt20I have changed the snapped belt but have knocked 3 wires out of the front I am looking for the wire diagrame so I can plug them back into the right places.Wed, 09 Dec 2009 21:22:19 GMThttp://www.fixya.com/support/t226644-dryer_not_cominghad to change the wiring and had the wrong wire i needed a four wire and it was a three and i came on with the three wire but after i changed it back in never came back onWed, 09 Dec 2009 21:22:19 GMThttp://www.fixya.com/support/t227654-dryerdyer heating elment comes on then clicks goes off then comes onWed, 09 Dec 2009 21:22:19 GMThttp://www.fixya.com/support/t237459-heating_element_stays_after_door_openedIF there is time left on the timer and the door is opened and the dryer tumbler stops. The heating element stays on and never turns off . Only if the dryer timer is at zero (off position)Wed, 09 Dec 2009 21:22:19 GMT