http://www.fixya.com/support/p129448-ge_dwsr405ebww_dwsr405ebcc_electricSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comMon, 21 Dec 2009 11:17:39 GMT80http://www.fixya.com/support/t3466430-after_2_new_drum_plastic_slide_platesafter 2 new drum plastic slide plates were installed the dryer will severly vibrate once every 2 or 3 loads just before the cycle is complete when the dial is just past quick fluff 10Mon, 21 Dec 2009 11:17:40 GMThttp://www.fixya.com/support/t3004121-need_know_old_dryer_modelI need to know how old this dryer is Model 66814690 serial MG 1316480Mon, 21 Dec 2009 11:17:40 GMThttp://www.fixya.com/support/t2143253-dryer_start_spining_drumWe have a GE dryer 7 years old and yesterday my wife said that it doesn't work. I tried to turn it on but I can hear that the motor is tring to move the drum and nothing happans.It's just this noise coming from I guess the motor. The drum doesn't...Mon, 21 Dec 2009 11:17:40 GMThttp://www.fixya.com/support/t1913510-holes_in_clothesAfter drying clothes, clothes have small holes in them. Daughter put 2 brand new shirts in dryer and ended up with holes in them.Mon, 21 Dec 2009 11:17:40 GMThttp://www.fixya.com/support/t618971-dryer_over_heatingThe dryer starts, but it becomes really hot. After five possibly ten minutes, it stops. I am open to any suggestions. Thanks for your assistance. Eddie PilgramMon, 21 Dec 2009 11:17:40 GMThttp://www.fixya.com/support/t268717-dryer_hotMy dryer seems to be getting too hot. ?The back of the machine gets too hot to touch and the clothes that come out of the dryer are EXTREMELY hot. ?I'm afraid that it is a fire hazard. ?Any repair or checks that I could do before calling a repairman?Mon, 21 Dec 2009 11:17:40 GMThttp://www.fixya.com/support/t216288-ge_dryerI have a ge dryer, model DWSR405EB....ser# ZD719441A. Recently it has started taking a long time to dry clothes. There is a little heat but like I said it takes hours to dry a load of clothes. Do you think this is the thermostat? Any ideas? If you...Mon, 21 Dec 2009 11:17:40 GMThttp://www.fixya.com/support/t201969-electric_whirpool_dyrer_wont_runMy electric dryer will work sometimes, and then all of a sudden won't start. It makes a loud humming sound like its trying to get going, but the drum won't turn and it won't heat up. Sometimes, when it is running, it will stop in the middle of the...Mon, 21 Dec 2009 11:17:40 GMThttp://www.fixya.com/support/t205089-whirlpool_awz2303_tumble_dryer_onlyMy tumble dryer only blows cold but the drum rotates. I think this could have happened because the filter was not cleaned for 3-4 loads and; therefore, the dryer may have over-heated. I have looked for some kind of obvious reset switch but can't...Mon, 21 Dec 2009 11:17:40 GMThttp://www.fixya.com/support/t206394-lg_tumble_dryerWill not tumble, can hear motor trying to work and can sometimes get drum going but it will stopMon, 21 Dec 2009 11:17:40 GMThttp://www.fixya.com/support/t210064-tumble_dryerMy tumble dryer still works and turns the clothes but does'nt heat up! Took the back off and can see the heating element but it all looks connected properly and does'nt seem damaged. Will this be expensive to repair?Mon, 21 Dec 2009 11:17:40 GMThttp://www.fixya.com/support/t211684-no_heat_whirlpool_gas_dryerModel: LGR4634JQ0 The gas dryer no longer generates any heat. The motor will turn the drum. The timer is somehow affected, because if the dryer is turned on and left alone, it will tumble indefinitely.Mon, 21 Dec 2009 11:17:40 GMThttp://www.fixya.com/support/t211699-washing_machine_temperatureswhat temperatures are used by the settings on USA washing machines described as cold,warm and hot. The launderette i use in the UK uses USA machines, but the UK instructions on my clothes give temperatures.Mon, 21 Dec 2009 11:17:40 GMThttp://www.fixya.com/support/t211814-gas_only_comes_couple_cyclesI took the panel off the front and cleaned about a 1/2 inch of lint off of the inside. yikes! There was actually a layer that looked like it had been smoldering. I can see the igniter working and for the first two or three cycles the gas comes on...Mon, 21 Dec 2009 11:17:40 GMThttp://www.fixya.com/support/t215254-maytag_dryerI have a maytag dryer model # HYE3657AYW It will not start at all. I checked the circuit breaker. i found no problem their.Mon, 21 Dec 2009 11:17:40 GMThttp://www.fixya.com/support/t216154-whirlpool_calypso_dryer_electricalAfter the dryer has completed a drying cycle, it will not turn back on (after the door has been opened and closed). If the dryer is unplugged for about 15 minutes, it will work again after it is plugged in. Also, the display sometimes comes on by...Mon, 21 Dec 2009 11:17:40 GMThttp://www.fixya.com/support/t218929-no_heathi i'm Darrell i need some help with my kenmore 80 series dryer if gas. i have gas comeing to the dryer but no heat. can u help me?Mon, 21 Dec 2009 11:17:40 GMThttp://www.fixya.com/support/t220664-loose_drum_support_feltI notice that the dryer was making noise with the turning of the drum. I opened up the top of the dryer and found that the felt strip that the drum rides on has come loose. It appears that plastic studs that were used to hold it in place have...Mon, 21 Dec 2009 11:17:40 GMThttp://www.fixya.com/support/t221289-drive_beltCOULD YOU PLEASE TELL ME IF THE DRIVE BELT IS BROKE WILL THE DRUM STOP TURNINGMon, 21 Dec 2009 11:17:40 GMThttp://www.fixya.com/support/t223774-whirlpool_top_loader_drierModel (Uk) 3LER5436EQ1 Not turning on. Power is to the timer/programmer. Theres continuity on the door switch, thermal fuse, and the off/on button.There is no power to the on/off button however. The thermostat on the heater has continuity.There...Mon, 21 Dec 2009 11:17:40 GMThttp://www.fixya.com/support/t226329-dryer_hotpoint_dt20I have changed the snapped belt but have knocked 3 wires out of the front I am looking for the wire diagrame so I can plug them back into the right places.Mon, 21 Dec 2009 11:17:40 GMThttp://www.fixya.com/support/t226644-dryer_not_cominghad to change the wiring and had the wrong wire i needed a four wire and it was a three and i came on with the three wire but after i changed it back in never came back onMon, 21 Dec 2009 11:17:40 GMThttp://www.fixya.com/support/t227654-dryerdyer heating elment comes on then clicks goes off then comes onMon, 21 Dec 2009 11:17:40 GMThttp://www.fixya.com/support/t237459-heating_element_stays_after_door_openedIF there is time left on the timer and the door is opened and the dryer tumbler stops. The heating element stays on and never turns off . Only if the dryer timer is at zero (off position)Mon, 21 Dec 2009 11:17:40 GMThttp://www.fixya.com/support/t237804-dryer_runs_only_when_start_buttonOur electric dryer will run only when the Start button is held down. Obviously, we can't hold it down for the entire time it takes to dry the clothes. Anybody know what the problem is?Mon, 21 Dec 2009 11:17:40 GMThttp://www.fixya.com/support/t239019-dryer_want_turnneed help with dryer, it want turn on (whirlpool)Mon, 21 Dec 2009 11:17:40 GMThttp://www.fixya.com/support/t243194-dryer_drum_issuesI have a Kenmore electric dryer. When I turn it on, it heats up and blows, but the drum won't turn.Mon, 21 Dec 2009 11:17:40 GMThttp://www.fixya.com/support/t246049-gas_dryer_no_heatKenmore front load gas dryer 76801690 Igniter never got hot. Checked ac voltage, never came on. Suspect some wiring or contact issue. I need a wiring and timing chart for the dryer. Just happened over the weekend 11/4/07.Mon, 21 Dec 2009 11:17:40 GMThttp://www.fixya.com/support/t247664-196_degree_non_resettable_thermal_fuseModel # LER3624EQO (or) 0 (Last character is a letter O or numeral 0.? I can't tell for sure)? This is a front loading electric dryer approx 10 yr old.? Dryer will not run, timer works and can be herd ticking, stops when front door is opened.? Start...Mon, 21 Dec 2009 11:17:40 GMThttp://www.fixya.com/support/t250199-connection_new_circuit_board_creda_tumbeI have purchased a new cicuit board as the other one burnt out due to lying on the drum whilst operating. I have now purchased a new circuit board. Can you please send me a picture or confirm which 3 wires attach to which 3 places on the circuit...Mon, 21 Dec 2009 11:17:40 GMT