20 Most Recent
Ricoh Aficio 2232C Color Copier Questions & Answers
Code to solution problem 690sc
SC 690 - GAVD IC2 communication error.690-001 :Y690-002:M690-003:C690-004:KPossible cause:loose connection,defective BCU,defective LD controller board.Turn the main switch OFF and ON,check the cable connection,replace the laser optics housing unit or replace the BCU board.
SC 690
GAVD I2C
communica-tion
error
690-001: Y
690-002: M
690-003: C
690-004: K
Ricoh Aficio Sc 122
The scanner home position sensordoes not detect the home positionduring initialization.Causes:Scanner I/O board or SBU defective• Scanner motor defective• Harness between scanner I/O boardand scanner motor disconnected• Scanner HP sensor defective• Harness between SBU and HP sensordisconnected• Scanner wire, timing belt, pulley, orcarriage defective
My Ricoh 2238c color copier has a SC440-01 error, what can I do?
Main motor errorThe main motor starts or changesspeed. The lock signal does notcontinue for 1 second within 3seconds.• The main motor starts. The locksignal is detected and operationproceeds normally. The locksignal is interrupted for 1 second.Causes: • Defective main motor• Too much load of the main motor drive
CLEANERWEB
are you sure ? i dont remeber that being a ricoh code all codes should be like sc 242 ?
Error code sc 680
Refer to BCU/MUSIC communication error.After the engine CPU sends a message,the MUSIC CPU does not respond within five seconds three consecutive times.Possible cause:toner cartridge memory chip loose connection,memory chip problem,memory chip cable wiring problem.Turn the main switch OFF/ON.Check if the toner cartridge is installed correctly,replace the toner cartridge,check the harnessess are not damage or replace BCU board.
Not finding what you are looking for?